FORMATION OF CRUSHING ZONE AT THE LEVEL OF TAMPING IN THE CONDITIONS OF MASS EXPLOSIONS

The purpose of the work is to study the sequence of formation of the fracture zone in the area of the array above the ends of the system of adjacent charges in connection with the technological parameters of their mutual location. The task of works is the analytically substantiate the dependence of the value of the undamaged area of the array at the level of the bottomhole on the parameters of the system of downhole charges, taking into account the phenomenon of the edge effect. Research results. Data on the dimentions of the part of the massif in the lborewhole that does not participate in the mass deformation motion of the rock during the formation of adjacent downhole funnels are obtained. It is assumed that this area between adjacent charges is the source of the oversized fraction. Originality. The process of formation of the destroyed zone in space above the end of the boreholeis considered step by step: generation of the shock wave front, the symmetry of which is close to spherical, formation of the loosenning funnel system in the second stage, which does not adjacent charges of the total front of the stress wave from the explosion of downhole charges detonated from their bottom. Behind him moves the deformation front of a complex structure. It is assumed that this front in the system of two adjacent charges acquires a shape similar to a vertical wedge inverted by the base towards the free surface. The expected result of such a step-by-step deformation process is the desired degree of crushing of the rock mass at the level of the tamping. Conclusions and practical implications. Theoretically and calculatedly obtained and recommended rational parameters of the location of the system of well charges of limited length to reduce the size of the non-destructive region of the rock mass at the level of the tamping, which improves the design of mass explosions in mountain slopes.