Application of predictive Wide-Area Power System Stabilisers on Distributed Generators in power systems with high penetration of renewable energy sources

2021 ◽  
Author(s):  
Rodrigo Trentini
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
Power System ◽  
Renewable Energy Sources ◽  
Wide Area ◽  
Energy Sources ◽  
Distributed Generators ◽  
High Penetration

scholarly journals Converter-driven Stability Analysis of Power Systems Integrated with Hybrid Renewable Energy Sources

2021 ◽  
Author(s):  
Jianqiang Luo ◽  
Yiqing Zou ◽  
Siqi Bu
Keyword(s):  
Renewable Energy ◽  
Stability Analysis ◽  
Power Systems ◽  
Power System ◽  
Dynamic Models ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Power Electronic ◽  
Modal Interaction ◽  
Hybrid Renewable Energy

Various renewable energy sources such as wind power and photovoltaic (PV) have been increasingly integrated into the power system through power electronic converters in recent years. However, power electronic converter-driven stability issues under specific circumstances, for instance, modal resonances might deteriorate the dynamic performance of the power systems or even threaten the overall stability. In this paper, the integration impact of a hybrid renewable energy source (HRES) system on modal interaction and converter-driven stability is investigated in an IEEE 16-machine 68-bus power system. Firstly, an HRES system is introduced, which consists of full converter-based wind power generation (FCWG) and full converter-based photovoltaic generation (FCPV). The equivalent dynamic models of FCWG and FCPV are then established, followed by the linearized state-space modeling. On this basis, converter-driven stability analyses are performed to reveal the modal resonance mechanisms of the interconnected power systems and the modal interaction phenomenon. Additionally, time-domain simulations are conducted to verify effectiveness of dynamic models and support the converter-driven stability analysis results. To avoid detrimental modal resonances, an optimization strategy is further proposed by retuning the controller parameters of the HRES system. The overall results demonstrate the modal interaction effect between external AC power system and the HRES system and its various impacts on converter-driven stability.

scholarly journals Application of Synchrophasor Measurements for Improving Situational Awareness of the Power System

2018 ◽  
Vol 55 (2) ◽  
pp. 3-10
Author(s):  
A. Obushevs ◽  
A. Mutule
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
Power System ◽  
Electric Power ◽  
Real Time ◽  
Situational Awareness ◽  
Renewable Energy Sources ◽  
Electric Power System ◽  
Energy Sources ◽  
Scada Systems

Abstract The paper focuses on the application of synchrophasor measurements that present unprecedented benefits compared to SCADA systems in order to facilitate the successful transformation of the Nordic-Baltic-and-European electric power system to operate with large amounts of renewable energy sources and improve situational awareness of the power system. The article describes new functionalities of visualisation tools to estimate a grid inertia level in real time with monitoring results between Nordic and Baltic power systems.

scholarly journals Challenges of High Renewable Energy Sources Integration in Power Systems—The Case of Croatia

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1047
Author(s):  
Ninoslav Holjevac ◽  
Tomislav Baškarad ◽  
Josip Đaković ◽  
Matej Krpan ◽  
Matija Zidar ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
Power System ◽  
System Integration ◽  
Renewable Energy Sources ◽  
Current Situation ◽  
Electric Power System ◽  
Energy Sources ◽  
Wind Integration ◽  
Inertial Response

This paper presents a high-level overview of the integration of renewable energy sources (RES), primarily wind and solar, into the electric power system (EPS) in Croatia. It presents transmission system integration aspects for the particular case of this country. It explains the current situation and technical characteristics of the current conventional generation units and currently installed wind energy capacities. Based on the current situation future development scenario is determined and used to evaluate the impacts of the wide-scale integration of renewables. Grid connections aspects, power balancing, market participation, and inertia reduction aspects are considered. Furthermore, some specifics of both solar and wind integration are discussed identifying problems and potential solutions. Primarily through the provision of the inertial response of both solar and wind and through better forecasting of wind production. Finally, the outlook for the Croatian power system is given, that will most probably double its RES capacity in the coming 3-year period and a certain level of investments and changes of current operational practices will need to be provided.

scholarly journals Simulation Verification of Overcurrent Protection Operation in Power Networks Integrating Renewable Energy Sources in Energy Communities

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2193
Author(s):  
Mateusz Szablicki ◽  
Piotr Rzepka ◽  
Adrian Halinka
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
Power System ◽  
Renewable Energy Sources ◽  
Design Stage ◽  
Energy Sources ◽  
Power System Protection ◽  
System Protection ◽  
Energy Community ◽  
Digital Protection

This publication discusses the risks of further use of classical overcurrent protections in modern power systems. The increasing penetration of renewable energy sources has caused a lot of challenges, among other things, the development of energy communities that balance local generation and consumption. Usually the interconnection line between the energy community and power systems are only used to balance the shortage or overflow of energy. As a result, most of the time these connections can be low loaded. Such a state can cause incorrect operation of power system protection approached, because the current level values are smaller than the required activation level for the protections. This article presents the potential incorrect operation of digital power system protection with overcurrent function. The obtained simulation results clearly show that the correctness of protection operation is strongly dependent on the level load of lines and the parameters and structure of the protection decision algorithms. These problems occur during low load line periods because these were not taken into account during the classical digital protection design stage. In the future this can cause problems with the fulfillment of the basic protection requirements of stability, speed, sensitivity. This publication suggests extra problems for power system protection research.

scholarly journals Obtaining Probability Distribution Laws of Power System Steady-State Mode Parameters

2020 ◽  
Vol 20 (3) ◽  
pp. 41-51
Keyword(s):  
Renewable Energy ◽  
Probability Distribution ◽  
Power Systems ◽  
Power System ◽  
Renewable Energy Sources ◽  
Current Trend ◽  
System Stability ◽  
Energy Sources ◽  
Stable Operation ◽  
Distribution Laws

Stable operation of electrical power systems is one of the crucial issues in the power industry. Current vo­lumes of electricity consumption cause the need to constantly increase the generated capacity, repeatedly modifying and complicating the original circuit. In addition to this, given the current trend towards the use of digital power systems and renewable energy sources, more and more uncertainties difficult to predict by standard mathematical methods appear. Events in the power system are deterministic, i.e. random. Thus, it is difficult to fully assess the system stability, voltage levels, currents, or possible power losses. Finding the probability distribution laws can give us an understanding of all the possible states in which an object can exist. Obtaining them is complicated by the difficulty of accounting for all the correlations between the random arguments of the source data. These laws are necessary to determine the optimal operating modes, the possibility of solving the problem of determining the optimal renewable energy sources installation locations and the required amount of generated energy in a non-deterministic way. The purpose of this article is to test the developed SIBD method for obtaining the full probabilistic characteristics. This method, unlike the Monte Carlo methods, does not use a random sample of initial data, but completely covers the studied functional dependence. The problem was solved using the provisions of probability theory and mathematical statistics, numerical optimization methods in particular. The MATLAB Matpower application package was also used to solve technical computing problems.

Sign in / Sign up

Export Citation Format

Share Document