scholarly journals Power transformer faults diagnosis using undestructive methods (Roger and IEC) and artificial neural network for dissolved gas analysis applied on the functional transformer in the Algerian north-eastern: a comparative study

2021 ◽  
pp. 3-11
Author(s):  
L. Bouchaoui ◽  
K. E. Hemsas ◽  
H. Mellah ◽  
S. Benlahneche
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Power Transformer ◽  
Gas Analysis ◽  
Power Transformers ◽  
Dissolved Gas ◽  
Dissolved Gas Analysis ◽  
Artificial Neural

Introduction. Nowadays, power transformer aging and failures are viewed with great attention in power transmission industry. Dissolved gas analysis (DGA) is classified among the biggest widely used methods used within the context of asset management policy to detect the incipient faults in their earlier stage in power transformers. Up to now, several procedures have been employed for the lecture of DGA results. Among these useful means, we find Key Gases, Rogers Ratios, IEC Ratios, the historical technique less used today Doernenburg Ratios, the two types of Duval Pentagons methods, several versions of the Duval Triangles method and Logarithmic Nomograph. Problem. DGA data extracted from different units in service served to verify the ability and reliability of these methods in assessing the state of health of the power transformer. Aim. An improving the quality of diagnostics of electrical power transformer by artificial neural network tools based on two conventional methods in the case of a functional power transformer at Sétif province in East North of Algeria. Methodology. Design an inelegant tool for power transformer diagnosis using neural networks based on traditional methods IEC and Rogers, which allows to early detection faults, to increase the reliability, of the entire electrical energy system from transport to consumers and improve a continuity and quality of service. Results. The solution of the problem was carried out by using feed-forward back-propagation neural networks implemented in MATLAB-Simulink environment. Four real power transformers working under different environment and climate conditions such as: desert, humid, cold were taken into account. The practical results of the diagnosis of these power transformers by the DGA are presented. Practical value. The structure and specific features of power transformer winding insulation ageing and defect state diagnosis by the application of the artificial neural network (ANN) has been briefly given. MATLAB programs were then developed to automate the evaluation of each method. This paper presents another tool to review the results obtained by the delta X software widely used by the electricity company in Algeria.

scholarly journals A Fuzzy Logic Model for Power Transformer Faults’ Severity Determination Based on Gas Level, Gas Rate, and Dissolved Gas Analysis Interpretation

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 1009 ◽  
Author(s):  
Rahman Azis Prasojo ◽  
Harry Gumilang ◽  
Suwarno ◽  
Nur Ulfa Maulidevi ◽  
Bambang Anggoro Soedjarno
Keyword(s):  
Fuzzy Logic ◽  
Power Transformer ◽  
Local Population ◽  
Gas Analysis ◽  
Power Transformers ◽  
Support Vector ◽  
Dissolved Gas ◽  
New Approach ◽  
Dissolved Gas Analysis ◽  
Novel Approach

In determining the severity of power transformer faults, several approaches have been previously proposed; however, most published studies do not accommodate gas level, gas rate, and Dissolved Gas Analysis (DGA) interpretation in a single approach. To increase the reliability of the faults’ severity assessment of power transformers, a novel approach in the form of fuzzy logic has been proposed as a new solution to determine faults’ severity using the combination of gas level, gas rate, and DGA interpretation from the Duval Pentagon Method (DPM). A four-level typical concentration and rate were established based on the local population. To simplify the assessment of hundreds of power transformer data, a Support Vector Machine (SVM)-based DPM with high agreements to the graphical DPM has been developed. The proposed approach has been implemented to 448 power transformers and further implementation was done to evaluate faults’ severity of power transformers from historical DGA data. This new approach yields in high agreement with the previous methods, but with better sensitivity due to the incorporation of gas level, gas rate, and DGA interpretation results in one approach.

scholarly journals The application of the artificial neural network in analysing the spread quality

2018 ◽  
Vol 226 ◽  
pp. 04042
Author(s):  
Marko Petkovic ◽  
Marija Blagojevic ◽  
Vladimir Mladenovic
Keyword(s):  
Neural Network ◽  
Artificial Intelligence ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Food Processing ◽  
New Approach ◽  
Confectionery Products ◽  
Speed Up ◽  
Artificial Neural

In this paper, we introduce a new approach in food processing using an artificial intelligence. The main focus is simulation of production of spreads and chocolate as representative confectionery products. This approach aids to speed up, model, optimize, and predict the parameters of food processing trying to increase quality of final products. An artificial intelligence is used in field of neural networks and methods of decisions.

Modeling of Moment of Friction under Increasing Load Using Artificial Neural Networks

2008 ◽  
Vol 144 ◽  
pp. 130-135
Author(s):  
Krzysztof Gocman ◽  
Bolesław Giemza ◽  
Tadeusz Kałdoński
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Rotational Speed ◽  
Training Algorithms ◽  
Analysis Of Results ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
Increasing Load

Preliminary results of testing of influence of load and rotational speed on moment of friction are presented in this paper. Tests were carried out under increasing load and within the range of rotational speed of 500 – 1500 rpm. The analysis of results was elaborated and model of moment of friction was developed on the basis of artificial neural network (ANN). Different kind of networks and various training algorithms were applied in order to obtain the best quality of the developed models.

Prediction of the Consistency of Concrete by Means of the Use of Artificial Neural Networks

2011 ◽  
pp. 1484-1493
Author(s):  
Bele´n Gonzalez ◽  
Ma Isabel Martinez ◽  
Diego Carro
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Genetic Algorithms ◽  
Artificial Neural Networks ◽  
Fresh Concrete ◽  
Rheological Behaviour ◽  
Simple Approach ◽  
Artificial Neural

This chapter displays an example of application of the ANN in civil engineering. Concretely, it is applied to the prediction of the consistency of the fresh concrete through the results that slump test provides, a simple approach to the rheological behaviour of the mixtures. From the previously done tests, an artificial neural network trained by means of genetic algorithms adjusts to the situation, and has the variable value of the cone as an output, and as an input, diverse variables related to the composition of each type of concrete. The final discussion is based on the quality of the results and its possible application.

Oil-Filled Power Transformers Fault Diagnosis Based on Fuzzy-DRNN

2013 ◽  
Vol 448-453 ◽  
pp. 2520-2523
Author(s):  
Ying Ping Fan ◽  
Hui Da Duan
Keyword(s):  
Neural Network ◽  
Fuzzy Logic ◽  
Fault Diagnosis ◽  
Power Transformer ◽  
Gas Analysis ◽  
Power Transformers ◽  
Dissolved Gas ◽  
Dynamic Neural Network ◽  
The Neural Network ◽  
Transformer Fault

In recent years, improved three-ratio is an effective method for transformer fault diagnosis based on Dissolved Gas Analysis (DGA). In this paper, a simple dynamic neural network named as diagonal recurrent neural network (DRNN) is used to resolve the online fault diagnosis problems for oil-filled power transformer based on DGA. Because of the characteristic of improved three-ratio boundary is lack of matching, fuzzy logic in fault diagnosis is presented also to deal with the data of the neural network inputs. DRNN is used to model the fault diagnosis structure, the fuzzy logic is used to improve the faults diagnose reliability. In addition, some cases are used to show the capability of the suggested method in oil-filled power transformers fault diagnosis.

Sign in / Sign up

Export Citation Format

Share Document