An Integrated Multi-Disciplinary Analyses to Predict the Initial Fluid Contact and Its Impact on Field Development Strategy: A Case Study from Shallow Offshore Niger Delta Field

Author(s):  
Cem Kilic ◽  
Anindya Das ◽  
Thaddeus Ehighebolo ◽  
Tayo Balogun ◽  
Olaniyi Adenaiye ◽  
...  
2016 ◽  
Vol 19 (03) ◽  
pp. 391-402
Author(s):  
Sunday Amoyedo ◽  
Emmanuel Ekut ◽  
Rasaki Salami ◽  
Liliana Goncalves-Ferreira ◽  
Pascal Desegaulx

Summary This paper presents case studies focused on the interpretation and integration of seismic reservoir monitoring from several fields in conventional offshore and deepwater Niger Delta. The fields are characterized by different geological settings and development-maturity stages. We show different applications varying from qualitative to quantitative use of time-lapse (4D) seismic information. In the first case study, which is in shallow water, the field has specific reservoir-development challenges, simple geology, and is in phased development. On this field, 4D seismic, which was acquired several years ago, is characterized by poor seismic repeatability. Nevertheless, we show that because of improvements from seismic reprocessing, 4D seismic makes qualitative contributions to the ongoing field development. In the second case study, the field is characterized by complex geological settings. The 4D seismic is affected by overburden with strong lateral variations in velocity and steeply dipping structure (up to 40°). Prestack-depth-imaging (PSDM) 4D seismic is used in a more-qualitative manner to monitor gas injection, validate the geologic/reservoir models, optimize infill injector placement, and consequently, enhance field-development economics. The third case study presents a deep offshore field characterized by a complex depositional system for some reservoirs. In this example, good 4D-seismic repeatability (sum of source- and receiver-placement differences between surveys, dS+dR) is achieved, leading to an increased quantitative use of 4D monitoring for the assessment of sand/sand communication, mapping of oil/water (OWC) front, pressure evolution, and dynamic calibration of petro-elastic model (PEM), and also as a seismic-based production-logging tool. In addition, 4D seismic is used to update seismic interpretation, provide a better understanding of internal architecture of the reservoirs units, and, thereby, yield a more-robust reservoir model. The 4D seismic in this field is a key tool for field-development optimization and reservoir management. The last case study illustrates the need for seismic-feasibility studies to detect 4D responses related to production. In addition to assessing the impact of the field environment on the 4D- seismic signal, these studies also help in choosing the optimum seismic-survey type, design, and acquisition parameters. These studies would possibly lead to the adoption of new technologies such as broad-band streamer or nodes acquisition in the near future.


2020 ◽  
Author(s):  
Okiemute Amuboh ◽  
Suleiman Ahmed ◽  
Dolapo Enya ◽  
Gbolade Ibikunle ◽  
Imonite Imorame ◽  
...  

2021 ◽  
Author(s):  
Okon Edet Ita ◽  
Dulu Appah

Abstract The ability to identify underperforming wells and recover the remaining oil in place is a cornerstone for effective reservoir management and field development strategies. As advancement in computing programming capabilities continuous to grow, Python has become an attractive method to build complicated statistical models that predicts, diagnose or analyze well performance, efficiently and accurately. The aim of this study is to develop a computational model that will allows us to diagnose and analyze well performance using nodal analysis with the help of python. In this study, python was used to compute Nodal analysis method using Darcy and Vogel Equations. A case study was carried out using the data obtained from a field operating in the Niger Delta. Again, sensitivity of tubing size was conducted using python. The results obtained showed that a computational model with python has the ability to visualize, model and analyze wells performances. This technique will petroleum engineers to better monitor evaluate and enhance their production operation without the need for expensive softwares. This will reduce operating cost increases revenue.


2021 ◽  
Author(s):  
Linda Dennar ◽  
Mohammed Amro ◽  
Nicolai-Alexeji Kummer ◽  
Elias Arochukwu ◽  
Ahmed Suleiman ◽  
...  

Abstract Enhanced oil recovery has been gaining relevance over the years following success stories from already executed projects from various parts of the globe. The recoveries from such successful projects have tremendously increased the terminal life cycle recoveries from the subject reservoirs and subsequently the project Net Present Value and Value to Investment Ratio. More than 90% of Field Development Plans in the Niger Delta have not considered Enhanced Recovery Mechanism as part of the field development options and as such Top Quartile Recovery Factors are never achieved. In this study, the effectiveness of Enhanced Oil Recovery within the Niger-Delta reservoir sands via 3-Dimentional Dynamic Simulation, Economic models and Experimental investigations (temperature and pressure effects on polymer effectiveness) was done. The GN7000 reservoir was used as a case study for this work. This reservoir is the largest gas cap reservoir in the N-Onshore field within the Niger Delta area and it is at the mid-life stage. This study tested the effectiveness of three Recovery mechanisms (Water Flood, Polymer Flood and Polymer Alternating Gas). Simulated and Experimental result suggests that Polymer flooding and Polymer Alternating Gas (PAG) yields greater Technical Ultimate Recovery, better economic indices but greater complexity in polymer selection due to inherent high reservoir temperature and low salinity that make the use of synthetic polymers inadequate. Experimental investigation showed that biopolymers are most suitable for this sand. The suitability of some biopolymers (Xanthan and copolymers containing high level of 2-acrylamido2-methyl propane sulfonate (AMPS) showed good results. Study results shows that with the deployment of biopolymers with high viscosifying power and high resistance to thermal degradation an incremental recovery of 8% from the natural flow could be achieved. Research findings indicate that biopolymers could yield good results for Niger Delta sands within the pressure and temperature ranges of 93°C and 290 Bar.


2019 ◽  
pp. 000765031986967
Author(s):  
Uchechukwu Nwoke

In reality, most state actors—especially those in the developing world—are usually incapable of effectively governing all facets of their territory. This has necessitated the intervention of non-state actors (in this instance, corporations), who through their social responsibility engagements act as functional equivalents to state-driven government. Using empirical data, this article evaluates the “governance” interventions of corporations in the oil industry in Nigeria’s Delta region. While arguing that the area qualifies as an area of limited statehood, the article asserts that corporate social responsibility practices that are based on Western (neoliberal) approaches cannot contribute effectively to the sustainable development of host-communities. In this context, the article contends that since the social responsibility engagements of corporations in the Niger Delta (as in most developing countries) are influenced by a pro-West philosophy, the end result is a business responsibility engagement which is ineffective as a development strategy.


2017 ◽  
Author(s):  
P. Kritsadativud ◽  
P. Sivapiromrat ◽  
T. Limprasert ◽  
S. Srihirunrusmee ◽  
J. Whangkitjamorn ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document