scholarly journals Engineering the magnetism of nanographene via co-depositing hetero precursors

2021 ◽  
Author(s):  
Hui Zhang ◽  
Jianchen Lu ◽  
Yong Zhang ◽  
Lei Gao ◽  
Xin-Jing Zhao ◽  
...  
Keyword(s):  
Density Functional ◽  
Carbon Nanomaterials ◽  
Density Functional Theory Calculations ◽  
Scanning Tunneling Spectroscopy ◽  
Carbon Skeleton ◽  
Scanning Tunneling ◽  
Tunneling Microscopy ◽  
Molecular Precursors ◽  
New Strategy ◽  
Spin Number

Abstract The magnetism of carbon nanomaterials is dominated by the structure of its carbon skeleton. However, the magnetism engineering is hindered due to finite precursors. Here, we develop a new strategy to engineer the magnetism of nanographene through hetero-coupling two different precursors on Au(111) surface by using low-temperature bond-resolved scanning tunneling microscopy and scanning tunneling spectroscopy, combined with spin-polarized density functional theory calculations. Our results demonstrate that two homo-coupled products host close shell structure along with defects inducing magnetic one with the total spin number S = 1/2. Upon simultaneous depositing with another precursor, two hetero-coupled products switch to magnetic structure with the S = 1/2 and S = 1 resulting from carbon skeleton transformation. Our results provide a valid way via inducing different molecular precursors to engineer the magnetism of carbon nanomaterials, which could be extended in other magnetic materials instruction.

scholarly journals Imaging and identification of point defects in PtTe2

2021 ◽  
Vol 5 (1) ◽  
Author(s):  
Kuanysh Zhussupbekov ◽  
Lida Ansari ◽  
John B. McManus ◽  
Ainur Zhussupbekova ◽  
Igor V. Shvets ◽  
...  
Keyword(s):  
Point Defects ◽  
Density Functional ◽  
Transition Metal Dichalcogenides ◽  
Density Functional Theory Calculations ◽  
Charge Carrier Mobility ◽  
Scanning Tunneling Spectroscopy ◽  
Scanning Tunneling ◽  
Tunneling Microscopy ◽  
Recombination Rates ◽  
And Performance

AbstractThe properties and performance of two-dimensional (2D) materials can be greatly affected by point defects. PtTe2, a 2D material that belongs to the group 10 transition metal dichalcogenides, is a type-II Dirac semimetal, which has gained a lot of attention recently due to its potential for applications in catalysis, photonics, and spintronics. Here, we provide an experimental and theoretical investigation of point defects on and near the surface of PtTe2. Using scanning tunneling microscopy and scanning tunneling spectroscopy (STS) measurements, in combination with first-principle calculations, we identify and characterize five common surface and subsurface point defects. The influence of these defects on the electronic structure of PtTe2 is explored in detail through grid STS measurements and complementary density functional theory calculations. We believe these findings will be of significance to future efforts to engineer point defects in PtTe2, which is an interesting and enticing approach to tune the charge-carrier mobility and electron–hole recombination rates, as well as the site reactivity for catalysis.

scholarly journals Unlocking surface octahedral tilt in two-dimensional Ruddlesden-Popper perovskites

2022 ◽  
Vol 13 (1) ◽  
Author(s):  
Yan Shao ◽  
Wei Gao ◽  
Hejin Yan ◽  
Runlai Li ◽  
Ibrahim Abdelwahab ◽  
...  
Keyword(s):  
Density Functional ◽  
Carrier Transport ◽  
Plane Surface ◽  
Structural Phase ◽  
Density Functional Theory Calculations ◽  
Spin Splitting ◽  
Scanning Tunneling ◽  
Tunneling Microscopy ◽  
Out Of Plane ◽  
Inversion Asymmetry

AbstractMolecularly soft organic-inorganic hybrid perovskites are susceptible to dynamic instabilities of the lattice called octahedral tilt, which directly impacts their carrier transport and exciton-phonon coupling. Although the structural phase transitions associated with octahedral tilt has been extensively studied in 3D hybrid halide perovskites, its impact in hybrid 2D perovskites is not well understood. Here, we used scanning tunneling microscopy (STM) to directly visualize surface octahedral tilt in freshly exfoliated 2D Ruddlesden-Popper perovskites (RPPs) across the homologous series, whereby the steric hindrance imposed by long organic cations is unlocked by exfoliation. The experimentally determined octahedral tilts from n = 1 to n = 4 RPPs from STM images are found to agree very well with out-of-plane surface octahedral tilts predicted by density functional theory calculations. The surface-enhanced octahedral tilt is correlated to excitonic redshift observed in photoluminescence (PL), and it enhances inversion asymmetry normal to the direction of quantum well and promotes Rashba spin splitting for n > 1.

scholarly journals Atomistic investigation of surface characteristics and electronic features at high-purity FeSi(110) presenting interfacial metallicity

2021 ◽  
Vol 118 (17) ◽  
pp. e2021203118
Author(s):  
Biao Yang ◽  
Martin Uphoff ◽  
Yi-Qi Zhang ◽  
Joachim Reichert ◽  
Ari Paavo Seitsonen ◽  
...  
Keyword(s):  
Low Temperature ◽  
Density Of States ◽  
Density Functional ◽  
Iron Silicide ◽  
Density Functional Theory Calculations ◽  
Surface Characteristics ◽  
Scanning Tunneling ◽  
Magnetic Characteristics ◽  
Tunneling Microscopy ◽  
Single Crystal Surfaces

Iron silicide (FeSi) is a fascinating material that has attracted extensive research efforts for decades, notably revealing unusual temperature-dependent electronic and magnetic characteristics, as well as a close resemblance to the Kondo insulators whereby a coherent picture of intrinsic properties and underlying physics remains to be fully developed. For a better understanding of this narrow-gap semiconductor, we prepared and examined FeSi(110) single-crystal surfaces of high quality. Combined insights from low-temperature scanning tunneling microscopy and density functional theory calculations (DFT) indicate an unreconstructed surface termination presenting rows of Fe–Si pairs. Using high-resolution tunneling spectroscopy (STS), we identify a distinct asymmetric electronic gap in the sub-10 K regime on defect-free terraces. Moreover, the STS data reveal a residual density of states in the gap regime whereby two in-gap states are recognized. The principal origin of these features is rationalized with the help of the DFT-calculated band structure. The computational modeling of a (110)-oriented slab notably evidences the existence of interfacial intragap bands accounting for a markedly increased density of states around the Fermi level. These findings support and provide further insight into the emergence of surface metallicity in the low-temperature regime.

Subsurface cation vacancy stabilization of the magnetite (001) surface

Science ◽  
2014 ◽  
Vol 346 (6214) ◽  
pp. 1215-1218 ◽  
Author(s):  
R. Bliem ◽  
E. McDermott ◽  
P. Ferstl ◽  
M. Setvin ◽  
O. Gamba ◽  
...  
Keyword(s):  
Iron Oxides ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Atomic Scale ◽  
Scanning Tunneling ◽  
Tunneling Microscopy ◽  
Material Interface ◽  
Functional Theory ◽  
Ordered Array ◽  
Low Energy Electron

Iron oxides play an increasingly prominent role in heterogeneous catalysis, hydrogen production, spintronics, and drug delivery. The surface or material interface can be performance-limiting in these applications, so it is vital to determine accurate atomic-scale structures for iron oxides and understand why they form. Using a combination of quantitative low-energy electron diffraction, scanning tunneling microscopy, and density functional theory calculations, we show that an ordered array of subsurface iron vacancies and interstitials underlies the well-known (2×2)R45° reconstruction of Fe3O4(001). This hitherto unobserved stabilization mechanism occurs because the iron oxides prefer to redistribute cations in the lattice in response to oxidizing or reducing environments. Many other metal oxides also achieve stoichiometry variation in this way, so such surface structures are likely commonplace.

scholarly journals Tailoring Long-Range Superlattice Chirality in the Molecular Selfassemblies via Weak Fluorine-Mediated Interactions

2021 ◽  
Author(s):  
Mykola Telychko ◽  
Lulu Wang ◽  
Chia-Hsiu Hsu ◽  
Guangwu Li ◽  
Xinnan Peng ◽  
...  
Keyword(s):  
Long Range ◽  
Density Functional ◽  
Chiral Recognition ◽  
Lone Pair ◽  
Density Functional Theory Calculations ◽  
Scanning Tunneling ◽  
Tunneling Microscopy ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Controllable Fabrication

Controllable fabrication of the enantiospecific molecular superlattices is a matter of imminent scientific and technological interest. Herein, we demonstrate that long-range superlattice chirality in molecular self-assemblies can be tailored by tuning the interplay of weak intermolecular non-covalent interactions. Different chiral recognition patterns are achieved in the two molecular self-assemblies comprised by two molecular enantiomers with identical steric conformations, derived from the hexaphenylbenzene – the smallest star-shaped polyphenylene. By means of high-resolution scanning tunneling microscopy measurements, we demonstrate that functionalization of star-shaped polyphenylene with fluorine (F) atoms leads to the formation of molecular self-assemblies with the distinct long-range chiral recognition patterns. We employed the density functional theory calculations to quantify F-mediated lone pair F ···π, C-H··· F, F···F interactions attributed to the tunable enantiospecific molecular self-organizations. Our findings underpin a viable route to tailor long-range chiral recognition patterns in supramolecular assemblies by engineering the weak non-covalent intermolecular interactions.

Fullerene C60 Films Cross-Linked with Octane-1,8-Dithiol: Preparation, Characterization and the Use as Template for Chemical Deposition of Gold Nanoparticles

2008 ◽  
Vol 8 (8) ◽  
pp. 3828-3837 ◽  
Author(s):  
Víctor Meza-Laguna ◽  
Elena V. Basiuk ◽  
Edgar Alvarez-Zauco ◽  
Taras Yu. Gromovoy ◽  
Oscar Amelines-Sarria ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Density Functional ◽  
Chemical Deposition ◽  
Density Functional Theory Calculations ◽  
Scanning Tunneling ◽  
Tunneling Microscopy ◽  
Covalent Bonds ◽  
Transmission Electron ◽  
Average Size ◽  
20 Nm

We report on the preparation of fullerene C60 thin films chemically cross-linked with octane-1,8-dithiol, which are capable of binding gold nanoparticles. The formation of a polymer was directly proved by means of laser desorption/ionization time-of-flight mass spectra, in which we observed the cleavage of fullerene–dithiol polymer at different bonds. Fourier-transform infrared, Raman and UV-visible spectra of the functionalized films exhibited notorious changes due to the formation of new covalent bonds between C60 molecules and bifunctional thiol. We further demonstrated that the dithiol-functionalized fullerene can be employed as a support for stable and homogeneous deposition of gold nanoparticles. Their average size is about 5 nm according to high-resolution transmission electron microscopy observations, and up to 20 nm, as found from scanning tunneling microscopy images. The proposed binding mechanism is through a strong coordination attachment between Au nanoclusters and sulfur donor atoms of the functionalized fullerene, as supported by density functional theory calculations.

Sign in / Sign up

Export Citation Format

Share Document