scholarly journals Glucose and Xylose Productions From Oil Palm Empty Fruit Bunch by Hydrolysis With Enzyme and Acid Using Response Surface Methodology.

Author(s):  
Santat Sinjaroonsak ◽  
Aran H-Kittikun ◽  
Thanongsak Chaiyaso ◽  
Wasana Suyotha

Abstract Oil palm empty fruit bunch (EFB) is a major cellulosic waste from a palm oil mill. The use of EFB for bioconversion to fuel and valuable products is possible because this biomass is a cheap, renewable and abundantly available. This study was aimed to produce sugars from the alkaline peroxide pretreated EFB (APEFB) by hydrolysis with a commercial enzyme (iKnowzyme acid 2XL cellulase) in comparison with hydrochloric acid. Response surface methodology (RSM) was applied to improve the hydrolysis process. For an enzymatic hydrolysis, the optimum enzyme dose of 40 U/g APEFB and the liquid to solid ratio of 10 ml/g APEFB were investigated at 150 rpm and 50°C for 120 h. After saccharification, glucose and xylose obtained were 65.71 g/l (0.66 g/g APEFB) and 2.14 g/l (0.02 g/g APEFB), respectively. Many acids (acetic, formic, hydrochloric (HCl), nitric, orthophosphoric and sulfuric acids) were used to hydrolyze APEFB. The result showed that HCl was the best acid to produce glucose and xylose from APEFB with low furfural and hydroxymethylfurfural productions. The optimum HCl concentration and temperature for APEFB saccharification were 5.85% (w/v) acid at 114°C for 90 min. The glucose, xylose, furfural, and hydroxymethylfurfural obtained under these conditions were 10.70 g/l (0.11 g/g APEFB), 15.30 g/l (0.15 g/g APEFB), 2.34 g/l (0.02 g/g APEFB) and 0.67 g/l (0.007 g/g APEFB), respectively.

2016 ◽  
Vol 60 ◽  
pp. 04009 ◽  
Author(s):  
Yee Kai Song ◽  
Irene Mei Leng Chew ◽  
Thomas Shean Yaw Choong ◽  
Jully Tan ◽  
Khang Wei Tan

2013 ◽  
Vol 699 ◽  
pp. 77-82 ◽  
Author(s):  
S. Duangwang ◽  
C. Sangwichien

Oil palm empty fruit bunch is a lignocellulosic material from palm oil plantations. It is a potential source of xylose which can be used as a raw material for production of xylitol. Using of lignocellulosic waste for bioconversion to fuels and chemicals is justifiable as these materials are low cost, renewable and widespread sources of sugars. The objective of the present study was to determine the effect of H2SO4 concentration, reaction temperature and reaction time for acid hydrolysis of pretreated OPEFB, pretreated OPEFB with reaction temperature, reaction time and NaOH concentration were 130 °C, 40 min and 15% (w/v), respectively to achieve high xylose yield. Batch reactions were carried out under various reaction temperature, reaction time and H2SO4 concentration. Response Surface Methodology (RSM) was followed to optimize acid hydrolysis in order to obtain high yield of xylose. The optimum reaction temperature, reaction time and H2SO4 concentration were found to be 140 °C, 90 min and 7% (w/v), respectively. The maximum value of xylose was obtained 56.39 g/l by using the above condition. The best result of xylose yield obtained was 126%.


2021 ◽  
Author(s):  
Dwini Normayulisa Putri ◽  
Meka Saima Perdani ◽  
Masafumi Yohda ◽  
Tania Surya Utami ◽  
Muhamad Sahlan ◽  
...  

Abstract Enzymatic hydrolysis of oil palm empty fruit bunch (OPEFB) that has been pretreated by modified pretreatment has been investigated in this study. The OPEFB used was pretreated by using sequential peracetic acid – alkaline peroxide solution. As the modification method, the assistance of pretreatment by ultrasound was conducted, in order to increase the enzyme accessibility. Therefore, it enhances the production of reducing sugar on the hydrolysis process. Prior to hydrolysis process, OPEFB was initially treated by using peracetic acid solution, comprise of CH3COOH (> 99%) and H2O2 (30% w/w), assisted by ultrasound for 3 hours at 35oC. Afterwards, OPEFB was treated by using alkaline peroxide solution, comprise of NaOH (40% w/w) and H2O2 (35% w/w), assisted by ultrasound for 10 hours at 35oC. OPEFB that has been pretreated was then subjected to enzymatic hydrolysis process using cellulase enzyme, in order to convert cellulose content into reducing sugar. Enzymatic hydrolysis was carried out at 50oC in a shaker incubator with 150 rpm for 48 hours. In this study, the effect of different enzyme concentration and hydrolysis time towards the sugar concentration in modified-pretreated OPEFB was observed and analyzed. Three different concentrations of enzyme were used, including 1.25, 2.5, and 5 g/L, and reducing sugar concentrations were analyzed at 30 and 45 minutes, and 1, 2, 4, 6, 24, 30, and 48 hours. Based on results, enzyme concentration has a significant effect to the production of reducing sugar. The reducing sugar concentrations obtained at the end of the hydrolysis process were 8.48, 11.06, 19.16 g/L, at the enzyme concentrations of 1.25, 2.5, and 5 g/L, respectively. At any hydrolysis time, the highest sugar concentration has been achieved on the highest enzyme concentration of 5 g/L. Moreover, the effective hydrolysis time were achieved at 6 hours, at all concentration of enzyme, since the production of reducing sugar were insignificant after 6 hours. This study showed an increase in reducing sugar production by 8.25% in the hydrolysis process using OPEFB pretreated by modified pretreatment compared to the non-modified pretreatment.


2012 ◽  
Vol 622-623 ◽  
pp. 117-121 ◽  
Author(s):  
Sairudee Duangwang ◽  
Chayanoot Sangwichien

Oil palm empty fruit bunch (OPEFB) is a potential source of cellulose which can serve as a promising raw material for the production of ethanol. The increasing interest on use of lignocellulosic waste for bioconversion to fuels and chemicals are justifiable as these materials are low cost, renewable and widespread sources of sugars. The objective of the present study was to determine the effect of NaOH concentration, reaction temperature and reaction time for alkali pretreatment to increase the amount of cellulose for hydrolysis to achieve high glucose yield. Batch reactions were carried out under various reaction temperature, reaction time and NaOH concentration. Response Surface Methodology (RSM) was followed to optimize the alkali pretreatment in order to obtain high amount of cellulose (%). The optimum reaction temperature, reaction time and NaOH concentration were found to be 130 ˚c, 40 min and 15% (w/v), respectively. The maximum value of cellulose was obtained 68.8% by using the above condition. 19.96 g/L glucose was achieved when reaction was carried out at 130 ˚c for time period of 90 min when 6% (w/v) of H2SO4 concentration maintained.


Sign in / Sign up

Export Citation Format

Share Document