scholarly journals Assimilation of Zinc Metal Ion With Hydroxyapatite for Formation and Dielectric Studies

Author(s):  
POOVENDRAN K ◽  
K.S. Joseph Wilson

Abstract The aim of the present work is to investigate the doping effect of Zn metal ions on hydroxyapatite for different concentrations (0.2, 0.4, 0.6, and 0.8). The samples for the pure and Zn doped HAp are synthesized by wet chemical precipitation method. The properties and the particle size are identified by using XRD. The functional bands of PO, CO and OH are analyzed through FTIR and the surface morphology and particle shapes are studied through SEM. The elemental analysis such as zinc, calcium and phosphates are analyzed by EDAX. All the designed elements are studied and confirm the (Ca+Zn)/PO ratio is nearly 1.67 and no other elements were identified in this study. The morphological particles of needle shape and the nanoscale particle size and shapes are studied by using TEM. The electrical conductivity of the synthesized ZnHAp ceramic is mainly related to width of the channel and the polarizability. The dielectric loss and nyquist plots were studied by using impedance spectroscopy.

2021 ◽  
Author(s):  
POOVENDRAN K ◽  
K.S. Joseph Wilson

Abstract The aim of the present work is to examine the doping outcome of Zn metal ions on hydroxyapatite for different concentrations (0.2, 0.4, 0.6, and 0.8). The samples for the pure and Zn doped HAp are synthesized by wet chemical precipitation method. The properties and the particle size are identified by using XRD. The functional bands of PO, CO and OH are analyzed through FTIR and the surface morphology and particle shapes are studied through SEM. The elemental analysis such as zinc, calcium and phosphates are analyzed by EDAX. All the designed elements are studied and confirm the (Ca+Zn)/PO ratio is nearly 1.67 and no other elements were identified in this study. The morphological particles of needle shape and the nanoscale particle size and shapes are studied by using TEM. The electrical conductivity of the synthesized ZnHAp ceramic is mainly related to width of the channel and the polarizability. The frequency dependence of the electric and dielectric properties was studied by using impedance spectroscopy.


2012 ◽  
Vol 531-532 ◽  
pp. 250-253 ◽  
Author(s):  
Hong Quan Zhang ◽  
Ming Zhang ◽  
Lu Wei Fu ◽  
Yu Ning Cheng

Zn or Mg ions doped hydroxyapatite (HA) particles were successfully developed by introducing various concentration of Zn or Mg in the starting solution using wet chemical precipitation method and followed a hydrothermal treatment. The products were identified as HA by XRD and FTIR, and the precipitated particles had a rod-like morphology. All the products for Mg and Zn ions concentration in the preparation solution less than 40 mol% were identified as HA. Substitution of Mg and Zn in HA crystal would impair the crystallization of HA and significantly reduce the length of a, c values of HA unit cell, which clearly demonstrated that Mg or Zn ions were structurally incorporated into the apatite crystals, they were not just absorbed on the surface of crystals.


RSC Advances ◽  
2014 ◽  
Vol 4 (40) ◽  
pp. 20902-20908 ◽  
Author(s):  
Reza Zamiri ◽  
Avito Rebelo ◽  
Golriz Zamiri ◽  
Atena Adnani ◽  
Ajay Kuashal ◽  
...  

We report on the synthesis of ZnO nanoplates and ZnO nanoplate/Ag nanoparticle heterostructures via a simple and cost effective wet chemical precipitation method.


2014 ◽  
Vol 631 ◽  
pp. 61-66 ◽  
Author(s):  
Liga Stipniece ◽  
Kristine Salma-Ancane ◽  
Andris Putnins ◽  
Liga Berzina-Cimdina

The main goal of this study was to evaluate the behavior of Sr- and/or Mg-containing hydroxyapatite (HAp) bioceramics in simulated body fluid (SBF). Sr-and/or Mg-containing HAp powders were synthesized by modified wet chemical precipitation method. Sr-and/or Mg-containing HAp bioceramics were prepared by uniaxial pressing of the precipitated powders and subsequent sintering at 1100 °C for 1 h. The synthesis products were characterized in terms of chemical, phase and molecular composition. Influence of the substitutions on thermal stability, morphology and microstructure of the HAp products were evaluated. Results suggest that incorporation of Sr (up to 1.45 wt.%) in HAp structure induced an increasing of particle sizes, but incorporation of Mg (up to 1.05 wt.%) led to a reduction of particle sizes of the HAp powders. The ability to simultaneously release bioactive ions and the apatite-formation ability of the Sr-and/or Mg-containing HAp bioceramics were evaluated through immersing the samples in SBF for different time periods. Ca ions release and apatite-formation ability on the surfaces of the Sr-and/or Mg-containing HAp bioceramics in SBF depends on Sr and/or Mg concentration in the samples.


2021 ◽  
pp. 132142
Author(s):  
Mashrafi Bin Mobarak ◽  
Md. Sahadat Hossain ◽  
Zenefar Yeasmin ◽  
Monika Mahmud ◽  
Md. Maksudur Rahmana Sazia Sultana ◽  
...  

2012 ◽  
Vol 47 (1) ◽  
pp. 1-8 ◽  
Author(s):  
S. F. Kabir ◽  
S. Ahmed ◽  
A. I. Mustafa ◽  
M. Ahsan ◽  
S. Islam

Fe-doped hydroxyapatite bio-ceramic material has been successfully synthesized by wet chemical precipitation method using waste egg shell as Ca precursor and (NH4)2HPO4 as P precursor. Two different concentrations of doping solutions (0.1 M and 0.05 M) were chosen and the developed apatite was characterized by using FT-IR, XRF, XRD and SEM techniques. Observed data were in excellent agreement with the standard values for hydroxyapatite which indicated successful formation of the Fe- doped apatite of different concentrations.DOI: http://dx.doi.org/10.3329/bjsir.v47i1.10711Bangladesh J. Sci. Ind. Res. 47(1), 1-8, 2012


Sign in / Sign up

Export Citation Format

Share Document