scholarly journals Possibility of applying a slider-crank mechanism to design sugarcane buds cutter

2021 ◽  
Vol 0 (0) ◽  
pp. 33-47
Author(s):  
W. Mahmoud ◽  
N. Elkaoud ◽  
A. Abu El-Maaty
Keyword(s):  
Mathematics ◽  
2021 ◽  
Vol 9 (13) ◽  
pp. 1581
Author(s):  
Alfonso Hernández ◽  
Aitor Muñoyerro ◽  
Mónica Urízar ◽  
Enrique Amezua

In this paper, an optimization procedure for path generation synthesis of the slider-crank mechanism will be presented. The proposed approach is based on a hybrid strategy, mixing local and global optimization techniques. Regarding the local optimization scheme, based on the null gradient condition, a novel methodology to solve the resulting non-linear equations is developed. The solving procedure consists of decoupling two subsystems of equations which can be solved separately and following an iterative process. In relation to the global technique, a multi-start method based on a genetic algorithm is implemented. The fitness function incorporated in the genetic algorithm will take as arguments the set of dimensional parameters of the slider-crank mechanism. Several illustrative examples will prove the validity of the proposed optimization methodology, in some cases achieving an even better result compared to mechanisms with a higher number of dimensional parameters, such as the four-bar mechanism or the Watt’s mechanism.


Author(s):  
Maria T. Orvananos-Guerrero ◽  
Mario Acevedo ◽  
Claudia N. Sanchez ◽  
Nicola Ivan Giannoccaro ◽  
Paolo Visconti ◽  
...  
Keyword(s):  

2012 ◽  
Vol 487 ◽  
pp. 608-612 ◽  
Author(s):  
Chih Cheng Kao

This paper mainly proposes an efficient modified particle swarm optimization (MPSO) method, to identify a slider-crank mechanism driven by a field-oriented PM synchronous motor. The parameters of many industrial machines are difficult to obtain if these machines cannot be taken apart. In system identification, we adopt the MPSO method to find parameters of the slider-crank mechanism. This new algorithm is added with “distance” term in the traditional PSO’s fitness function to avoid converging to a local optimum. Finally, the comparisons of numerical simulations and experimental results prove that the MPSO identification method for the slider-crank mechanism is feasible.


Author(s):  
S-T Chiou ◽  
J-C Tzou

It has been shown in a previous work that a frequency term of the shaking force of spatial mechanisms, whose hodograph is proved to be an ellipse, can be eliminated by a pair of contrarotating counterweights. In this work, it is found that the relevant frequency term of the shaking moment is minimized if the balancing shafts are coaxial at the centre of a family of ellipsoids, called isomomental ellipsoids, with respect to (w.r.t.) any point on an ellipsoid, as is also the root mean square (r.m.s.) of the relevant frequency term of the shaking moment. It can also be minimized even though the location of either shaft, but not both, is chosen arbitrarily on a plane. The location of the second shaft is then determinate. In order to locate the centre, a derivation for the theory of isomomental ellipsoids of a frequency term of the shaking moment of spatial mechanisms is given. It is shown that the r.m.s. of a frequency term shaking moment of a spatial mechanism w.r.t. the concentric centre of the isomomental ellipsoids is the minimum. Examples of a seven-link 7-R spatial linkage and a spatial slider-crank mechanism are included.


2013 ◽  
Vol 135 (6) ◽  
Author(s):  
Yan-Shin Shih ◽  
Chen-Yuan Chung

This paper investigates the dynamic response of the cracked and flexible connecting rod in a slider-crank mechanism. Using Euler–Bernoulli beam theory to model the connecting rod without a crack, the governing equation and boundary conditions of the rod's transverse vibration are derived through Hamilton's principle. The moving boundary constraint of the joint between the connecting rod and the slider is considered. After transforming variables and applying the Galerkin method, the governing equation without a crack is reduced to a time-dependent differential equation. After this, the stiffness without a crack is replaced by the stiffness with a crack in the equation. Then, the Runge–Kutta numerical method is applied to solve the transient amplitude of the cracked connecting rod. In addition, the breathing crack model is applied to discuss the behavior of vibration. The influence of cracks with different crack depths on natural frequencies and amplitudes is also discussed. The results of the proposed method agree with the experimental and numerical results available in the literature.


Sign in / Sign up

Export Citation Format

Share Document