Review on preparation and characterization of activated carbon from low cost waste materials

2021 ◽  
Vol 0 (0) ◽  
pp. 0-0
Author(s):  
Ahmed Halbus ◽  
Zahraa Athab ◽  
Falah Hussein
Keyword(s):  
Activated Carbon ◽  
Low Cost ◽  
Waste Materials ◽  
Characterization Of Activated Carbon

scholarly journals Preparation and characterization of activated carbon from Amygdalus Scoparia shell by chemical activation and its application for removal of lead from aqueous solutions

2010 ◽  
Vol 8 (6) ◽  
pp. 1273-1280 ◽  
Author(s):  
Sayed Mohammadi ◽  
Mohammad Karimi ◽  
Daryoush Afzali ◽  
Fatemeh Mansouri
Keyword(s):  
Activated Carbon ◽  
Aqueous Solutions ◽  
Low Cost ◽  
Chemical Activation ◽  
Maximum Adsorption Capacity ◽  
Batch Tests ◽  
Amygdalus Scoparia ◽  
Langmuir And Freundlich Equations ◽  
Characterization Of Activated Carbon

AbstractTwo series of activated carbon have been prepared by chemical activation of Amygdalus Scoparia shell with phosphoric acid or zinc chloride for the removal of Pb(II) ions from aqueous solutions. Several methods were employed to characterize the active carbon produced. The surface area was calculated using the standard Brunauer-Emmet-Teller method. The microstructures of the resultant activated carbon were observed by scanning electron microscopy. The chemical composition of the surface resultant activated carbon was determined by Fourier transform infrared spectroscopy. In the batch tests, the effect of pH, initial concentration, and contact time on the adsorption were studied. The data were fitted with Langmuir and Freundlich equations to describe the equilibrium isotherms. The maximum adsorption capacity of Pb(II) on the resultant activated carbon was 36.63 mg g−1 with H3PO4 and 28.74 mg g−1 with ZnCl2. To regenerate the spent adsorbents, desorption experiments were performed using 0.25 mol L−1 HCl. Here we propose that the activated carbon produced from Amygdalus Scoparia shell is an alternative low-cost adsorbent for Pb(II) adsorption.

scholarly journals Preparation and Characterization of Activated Carbon from Lapsi (Choerospondias axillaris) Seed Stone by Chemical Activation with Potassium Hydroxide

2014 ◽  
Vol 9 (1) ◽  
pp. 79-88 ◽  
Author(s):  
Sahira Joshi ◽  
Bhadra Prasad Pokharel
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Potassium Hydroxide ◽  
Low Cost ◽  
Chemical Activation ◽  
Sem Images ◽  
Monolayer Adsorption ◽  
Ft Ir ◽  
Characterization Of Activated Carbon

Activated carbon (AC) was prepared from Lapsi seed stone by chemical activation with Potassium hydroxide at 400°C. The AC was characterized by pH, moisture content, Fourier transform-infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), methylene blue (MB) and iodine (I2) number. FT-IR spectra indicated the presence of various oxygen containing functional groups on the surface of AC. SEM images show the highly porous characteristics of AC with full of cavities. The Iodine number of AC revealed that the AC was found to be highly micro-porous. The adsorption of methylene blue by prepared AC was analyzed by the Langmuir and Freundlich adsorption isotherms. The data fitted well to the Langmuir isotherm with monolayer adsorption capacity 158 mg/g. The analysis showed that the AC prepared from Lapsi seed stone activated with potassium hydroxide could be a low-cost adsorbent with favorable surface properties. DOI: http://dx.doi.org/10.3126/jie.v9i1.10673Journal of the Institute of Engineering, Vol. 9, No. 1, pp. 79–88

Silane modification and characterization of activated carbon

Adsorption ◽  
2011 ◽  
Vol 18 (1) ◽  
pp. 23-29 ◽  
Author(s):  
Qing He ◽  
Yingbo Xu ◽  
Chenghui Wang ◽  
Shike She ◽  
Shun Zhou ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Silane Modification ◽  
Characterization Of Activated Carbon

Characterization of Activated Carbon Fibers by CO2Adsorption

Langmuir ◽  
1996 ◽  
Vol 12 (11) ◽  
pp. 2820-2824 ◽  
Author(s):  
D. Cazorla-Amorós ◽  
J. Alcañiz-Monge ◽  
A. Linares-Solano
Keyword(s):  
Activated Carbon ◽  
Carbon Fibers ◽  
Activated Carbon Fibers ◽  
Characterization Of Activated Carbon

scholarly journals Removal of Ni (II) from Aqueous Solution by Adsorption onto Activated Carbon Prepared from Lapsi (Choerospondias axillaris) Seed Stone

2014 ◽  
Vol 9 (1) ◽  
pp. 166-174 ◽  
Author(s):  
Rajeshwar M. Shrestha ◽  
Margit Varga ◽  
Imre Varga ◽  
Amar P. Yadav ◽  
Bhadra P. Pokharel ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Activated Carbons ◽  
Low Cost ◽  
Chemical Characterization ◽  
Maximum Adsorption Capacity ◽  
Adsorption Data ◽  
Optimum Ph ◽  
Nickel Adsorption

Activated carbons were prepared from Lapsi seed stone by the treatment with H2SO4 and HNO3 for the removal of Ni (II) ions from aqueous solution. Two activated carbon have been prepared from Lapsi seed stones by treating with conc.H2SO4 and a mixture of H2SO4 and HNO3 in the ratio of 1:1 by weight for removal of Ni(II) ions. Chemical characterization of the resultant activated carbons was studied by Fourier Transform Infrared Spectroscopy and Boehm titration which revealed the presence of oxygen containing surface functional groups like carboxyl, lactones and phenols in the carbons. The optimum pH for nickel adsorption is found to be 5. The adsorption data were better fitted with the Langmuir equations than Freundlich adsorption equation to describe the equilibrium isotherms. The maximum adsorption capacity of Ni (II) on the resultant activated carbons was 28.25.8 mg g-1 with H2SO4 and 69.49 mg g-1 with a mixture of H2SO4 and HNO3. The waste material used in the preparation of the activated carbons is inexpensive and readily available. Hence the carbons prepared from Lapsi seed stones can act as potential low cost adsorbents for the removal of Ni (II) from water. DOI: http://dx.doi.org/10.3126/jie.v9i1.10680Journal of the Institute of Engineering, Vol. 9, No. 1, pp. 166–174

Sign in / Sign up

Export Citation Format

Share Document