Organic matter degradation in a greywater recycling system using a multistage moving bed biofilm reactor (MBBR)

2017 ◽  
Vol 76 (12) ◽  
pp. 3328-3339 ◽  
Author(s):  
Assia Saidi ◽  
Khaoula Masmoudi ◽  
Erwin Nolde ◽  
Btissam El Amrani ◽  
Fouad Amraoui
Keyword(s):  
Organic Matter ◽  
Loading Rate ◽  
Reduction Rate ◽  
Oxygen Demand ◽  
Biofilm Reactor ◽  
Organic Matter Degradation ◽  
Moving Bed Biofilm Reactor ◽  
Moving Bed ◽  
Recycling System ◽  
Service Water

Abstract Greywater is an important non-conventional water resource which can be treated and recycled in buildings. A decentralized greywater recycling system for 223 inhabitants started operating in 2006 in Berlin, Germany. High load greywater undergoes advanced treatment in a multistage moving bed biofilm reactor (MBBR) followed by sand filtration and UV disinfection. The treated water is used safely as service water for toilet flushing. Monitoring of the organic matter degradation was pursued to describe the degradation processes in each stage and optimize the system. Results showed that organic matter reduction was achieved for the most part in the first three reactors, whereas the highest reduction rate was observed in the third reactor in terms of COD (chemical oxygen demand), dissolved organic carbon and BOD7 (biological oxygen demand). The results also showed that the average loading rate entering the system was 3.7 kg COD/d, while the removal rate was 3.4 kg COD/d in a total bioreactor volume of 11.7 m³. In terms of BOD, the loading rate was 2.8 kg BOD/d and it was almost totally removed. This system requires little space (0.15 m²/person) and maintenance work of less than one hour per month and it shows operational stability under peak loads.

scholarly journals Partial Nitrification in a Sequencing Moving Bed Biofilm Reactor (SMBBR) with Zeolite as Biomass Carrier: Effect of Sulfide Pulses and Organic Matter Presence

Water ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 2484
Author(s):  
César Huiliñir ◽  
Vivian Fuentes ◽  
Carolina Estuardo ◽  
Christian Antileo ◽  
Ernesto Pino-Cortés
Keyword(s):  
Organic Matter ◽  
Sulfide Oxidation ◽  
Oxygen Demand ◽  
Ammonia Nitrogen ◽  
Biofilm Reactor ◽  
Partial Nitrification ◽  
Liquid Volume ◽  
Nitrite Accumulation ◽  
Moving Bed Biofilm Reactor ◽  
Moving Bed

This work aimed to achieve partial nitrification (PN) in a Sequencing Moving Bed Biofilm Reactor SMBBR with zeolite as a biomass carrier by using sulfide pulses in the presence of organic matter as an inhibitor. Two conditions were evaluated: sulfide (HS−) = 5 mg S/L and vvm (air volume per liquid volume per minute, L of air L−1 of liquid min−1) = 0.1 (condition 1); and a HS− = 10 mg S/L and a vvm = 0.5 (condition 2). The simultaneous effect of organic matter and sulfide was evaluated at a Chemical Oxygen Demand (COD) = 350 mg/L and HS− = 5 mg S/L, with a vvm = 0.5. As a result, using the sulfide pulse improved the nitrite accumulation in both systems. However, Total Ammonia Nitrogen (TAN) oxidation in both processes decreased by up to 60%. The simultaneous presence of COD and sulfide significantly reduced the TAN and nitrite oxidation, with a COD removal yield of 80% and sulfide oxidation close to 20%. Thus, the use of a sulfide pulse enabled PN in a SMBBR with zeolite. Organic matter, together with the sulfide pulse, almost completely inhibited the nitrification process despite using zeolite.

Nitrification in the presence of sulfide and organic matter in a sequencing moving bed biofilm reactor (SMBBR) with zeolite as biomass carrier

2019 ◽  
Vol 95 (1) ◽  
pp. 173-182 ◽  
Author(s):  
Cesar Huiliñir ◽  
Vivian Fuentes ◽  
Giovanni Esposito ◽  
Silvio Montalvo ◽  
Lorna Guerrero
Keyword(s):  
Organic Matter ◽  
Biofilm Reactor ◽  
Moving Bed Biofilm Reactor ◽  
Moving Bed

Enhanced simultaneous nitri-denitrification in aerobic moving bed biofilm reactor containing polyurethane foam-based carrier media

2019 ◽  
Vol 79 (3) ◽  
pp. 510-517 ◽  
Author(s):  
Magdum Sandip ◽  
V. Kalyanraman
Keyword(s):  
Chemical Oxygen Demand ◽  
Nitrogen Removal ◽  
Oxygen Demand ◽  
Biofilm Reactor ◽  
Moving Bed Biofilm Reactor ◽  
Moving Bed ◽  
Removal Capacity ◽  
Pu Foam ◽  
Removal Efficiencies ◽  
Biofilm Support

Abstract Fluidization of carrier media for biofilm support and growth defines the moving bed biofilm reactor (MBBR) process. Major MBBR facilities apply virgin polyethylene (PE)-based circular plastic carrier media. Various carriers were studied to replace these conventional carriers, but polyurethane (PU) foam-based carrier media has not been much explored. This study evaluates the potential of PU foam carrier media in aerobic MBBR process for simultaneous nitri-denitrification (SND). Two parallel reactors loaded with conventional PE plastic (circular) and PU foam (cubical) carriers compared for their removal efficiencies of chemical oxygen demand (COD) and nitrogen contaminants from wastewater. Results indicate that average COD removal in MBBR containing PE plastic carrier media was 81%, compared to 83% in MBBR containing PU foam. Average ammonical and total nitrogen reduction was 71% and 59% for PU foam-based MBBR, compared to 60% and 42% for PE plastic-based MBBR. SND-based nitrogen removal capacity was doubled in aerobic MBBR filled with PU foam carrier media (27%), than MBBR containing PE plastic carrier media (13%). Cost economics also governs the commercial advantage for the application of PU foam-based carrier media in the MBBR process.

Validating the Colloid model to optimise the design and operation of both moving-bed biofilm reactor and integrated fixed-film activated sludge systems

2014 ◽  
Vol 69 (7) ◽  
pp. 1552-1557 ◽  
Author(s):  
J. Albizuri ◽  
P. Grau ◽  
M. Christensson ◽  
L. Larrea
Keyword(s):  
Activated Sludge ◽  
Oxygen Demand ◽  
Biofilm Reactor ◽  
Nitrification Rate ◽  
Moving Bed Biofilm Reactor ◽  
Moving Bed ◽  
Fixed Film ◽  
Solids Retention ◽  
Lower Effect ◽  
Activated Sludge Systems

The paper presents a systematic study of simulations, using a previously calibrated Colloid model, from which it was found that: (i) for pure moving-bed biofilm reactor (MBBR) processes with tertiary nitrification conditions (no influent chemical oxygen demand (COD)), dissolved oxygen = 5 mg/L and residual NH4-N > 4 mgN/L, a nitrification rate of 1.2 gN/(m2d) was obtained at 10 °C. This rate decreases sharply when residual NH4-N is lower than 2 mgN/L, (ii) for MBBR systems with predenitrification–nitrification zones and COD in the influent (soluble and particulate), the nitrification rate (0.6 gN/(m2d)) is half of that in tertiary nitrification due to the effect of influent colloidal XS (particulate slowly biodegradable COD) and (iii) for integrated fixed-film activated sludge (IFAS) processes the nitrification rate in the biofilm (0.72 gN/(m2d)) is 20% higher than for the pure MBBR due to the lower effect of influent XS since it is adsorbed onto flocs. However, it is still 40% lower than the tertiary nitrification rate. In the IFAS, the fraction of the nitrification rate in suspension ranges from 10 to 70% when the aerobic solids retention time varies from 1.4 to 6 days.

Simultaneous removal of atrazine and organic matter from wastewater using anaerobic moving bed biofilm reactor: A performance analysis

2018 ◽  
Vol 209 ◽  
pp. 515-524 ◽  
Author(s):  
Zahra Derakhshan ◽  
Amir Hossein Mahvi ◽  
Mohammad Taghi Ghaneian ◽  
Seyed Mohammad Mazloomi ◽  
Mohammad Faramarzian ◽  
...  
Keyword(s):  
Organic Matter ◽  
Performance Analysis ◽  
Biofilm Reactor ◽  
Simultaneous Removal ◽  
Moving Bed Biofilm Reactor ◽  
Moving Bed ◽  
A Performance

scholarly journals Intermittent Aeration in a Hybrid Moving Bed Biofilm Reactor for Carbon and Nutrient Biological Removal

Water ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 492 ◽  
Author(s):  
Gaetano Di Bella ◽  
Giorgio Mannina
Keyword(s):  
Loading Rate ◽  
Nitrogen Loading ◽  
Biofilm Reactor ◽  
Operating Conditions ◽  
Organic Loading Rate ◽  
Intermittent Aeration ◽  
Moving Bed Biofilm Reactor ◽  
Moving Bed ◽  
Operational Conditions ◽  
N Removal

The paper presents an experimental study on a lab scale hybrid moving bed biofilm reactor with intermittent aeration. Specifically, a comparison between two different operating conditions was analyzed: continuous and intermittent aeration. Both continuous and intermittent aeration were monitored and compared in order to get the best operational conditions. The intermittent aeration campaign was sub-divided in three phases with different duration of alternation of aerobic and anoxic times and organic and nitrogen loading rates. The efficiency of N-removal improved by 70% during the intermittent aeration. The best condition was observed with 40 min of aeration and 20 min of no-aeration, an organic loading rate of 2.2 kgCODm−3day−1 and a nitrogen loading rate of 0.25 kgNm−3day−1: under these operational conditions the removal efficiencies for carbon and nitrogen were 93% and 90%, respectively. The derived results provide the basis for WWTP upgrade in order to meet stricter effluent limits at low energy requirements.

Sign in / Sign up

Export Citation Format

Share Document