Rigid polyurethane (RPU) foams have been successfully glycolyzed by using diethylene glycol (DEG) and crude glycerol (CG) as transesterification agents. However, DEG did not allow to achieve a split-phase process, obtaining a product with low polyol purity (61.7 wt %). On contrary, CG allowed to achieve a split-phase glycolysis improving the recovered polyol purity (76.5%). This is an important novelty since, up to now, RPUs were glycolyzed in single-phase processes giving products of low polyol concentration, which reduced the further applications. Moreover, the nanosilica used as filler of the glycolyzed foams was recovered completely pure. The recovered polyol successfully replaced up to 60% of the raw polyol in the synthesis of RPU foams and including the recovered nanosilica in the same concentration than in glycolyzed foam. Thus, the feasibility of the chemical recycling of this type of polyurethane composites has been demonstrated. Additionally, PU foams were synthesized employing fresh nanosilica to evaluate whether the recovered nanosilica has any influence on the RPU foam properties. These foams were characterized structurally, mechanically and thermally with the aim of proving that they met the specifications of commercial foams. Finally, the feasibility of recovering the of CG by vacuum distillation has been demonstrated.
Glycolysis of Polyurethanes Composites Containing Nanosilica
