scholarly journals Formulation, Characterization and In-vitro Evaluation of Cetrizine HCL Oral Disintegrating Tablets

1970 ◽  
Vol 7 (5) ◽  
pp. 19-24
Author(s):  
HARITHA PASUPULATI ◽  
Y PHALGUNA ◽  
SANDHYA RUDRA
Keyword(s):  
Bulk Density ◽  
Direct Compression ◽  
Compression Method ◽  
Disintegration Time ◽  
Sodium Starch Glycolate ◽  
Weight Variation ◽  
Wetting Time ◽  
Croscarmellose Sodium ◽  
In Vitro Disintegration

The main objective of this work is to formulate and evaluate Cetirizine HCl MFDT’s using different concentrations of superdisintegrants like croscarmellose sodium (CCS), sodium starch glycolate (SSG) and their combinations in different ratios. The in vitro disintegration time of Cetrizine Hcl prepared by direct compression method by super disintegrates were found to be in the range of 18 to 11sec fulfilling the official requirements. The bulk density and tapped bulk density for the entire formulation blend varied from 0.508 gm/cc to 0.5438 gm/cc and 0.5941 to 0.6408 respectively. The friability was found in all designed formulations in the range 0.42 to 0.74% to be well within the approved range (<1%). The weight variation was found in all designed formulation in the range 97 to 102 mg. The wetting time were found to be in the range of 11 to 18sec. Water absorption ratio for all the formulations found in the range 11 to 16%.combination of sodium starch glycolate and cross carmellose sodium (6% of 25%-ssg&75%ccs)) promotes dissolution rate of drug release when compared to formulation of SSG & CCS alone. It may be due to capillary and wicking mechanism of SSG & CCS.   Keywords:   

scholarly journals DESIGN, OPTIMIZATION AND EVALUATION OF ACECLOFENAC FAST DISSOLVING TABLETS EMPLOYING STARCH VALERATE–A NOVEL SUPERDISINTEGRANT

2021 ◽  
pp. 168-176
Author(s):  
R. SANTOSH KUMAR ◽  
SHAMBHAVI KANDUKURI ◽  
M. RAMYA ◽  
B. KUSUMA LATHA
Keyword(s):  
Factorial Design ◽  
Immediate Release ◽  
Compression Method ◽  
Disintegration Time ◽  
23 Factorial Design ◽  
Sodium Starch Glycolate ◽  
Wetting Time ◽  
Croscarmellose Sodium ◽  
Dissolution Efficiency

Objective: To synthesize, characterize and evaluate starch valerate as a superdisintegrant in the formulation of aceclofenac fast dissolving tablets by employing 23 factorial design. Methods: Starch valerate was synthesized and its physical and micromeritic properties were performed to evaluate it. The fast dissolving tablet of aceclofenac was prepared by employing starch valerate as a superdisintegrant in different proportions in each case by direct compression method using 23 factorial design for evaluation of tablet parameters like disintegration and dissolution efficiency in 5 min. Results: The starch valerate prepared was found to be fine, amorphous and free flowing. Starch valerate exhibited good swelling in water with swelling index (125.2%). The study of starch valerate was shown by fourier transform infrared spectra (FTIR). The drug content (200±5%), hardness (3.5–4 kg/sq. cm), and friability (<0.15%) has been effective with regard to all the formulated fast dissolving tablets employing starch valerate. The disintegration time of all the formulated tablets was found to be in the range of 14±0.04 to 25.7±0.02 sec. The optimized formulation F4 had the least disintegration time i.e., 12.8±0.02 sec. The wetting time of the tablets was found to be in the range of 76±0.21 to 217±0.17s. The In vitro wetting time was less (i.e., 28±0.02s) in optimized formulation F4. The water absorption ratio of the formulated tablets was found to be in the range of 46±0.12 to 100±0.27%. The percent drug dissolved in the optimized formulation F8 was found to be 99.93% in 5 min. Conclusion: Starch valerate, when combined with sodium starch glycolate, croscarmellose sodium, with aceclofenac, was found to be an effective super disintegrant which improved the dissolution efficiency and could therefore be used in the formulation of quick dissolving tablets to provide immediate release of the contained drug within 5 min.

scholarly journals OPTIMIZATION OF STARCH CROTONATE AS A NOVEL SUPERDISINTEGRANT IN THE FORMULATION OF FAST DISSOLVING TABLETS THROUGH 23 FACTORIAL DESIGN

2021 ◽  
pp. 247-256
Author(s):  
A. HARI OM PRAKASH RAO ◽  
SANTOSH KUMAR RADA ◽  
SHAMBHAVI KANDUKURI
Keyword(s):  
Factorial Design ◽  
Immediate Release ◽  
Compression Method ◽  
Disintegration Time ◽  
23 Factorial Design ◽  
Sodium Starch Glycolate ◽  
Wetting Time ◽  
Croscarmellose Sodium ◽  
Dissolution Efficiency

Objective: To synthesize, characterize and evaluate starch crotonate as a superdisintegrant in the formulation of Piroxicam fast dissolving tablets by employing 23 factorial design. Methods: Starch crotonate was synthesized and its physical and micromeritic properties were performed to evaluate it. The fast dissolving tablet of Piroxicam were prepared by employing starch crotonate as a superdisintegrant in different proportions in each case by direct compression method using 23 factorial design. Results: The starch chrotonate prepared was found to be fine, free flowing and amorphous. Starch crotonate exhibited good swelling in water with swelling index (50%). The study of starch crotonate was shown by fourier transform infrared spectra (FTIR). The drug content (100±5%), hardness (3.6–4 kg/sq. cm), and friability (<0.15%) have been effective with regard to all the formulated fast dissolving tablets employing starch crotonate. The disintegration time of all the formulated tablets was found to be in the range of 18±03 to 66±03 sec. The optimized formulation F8 had the least disintegration time i.e., 18±03 sec. The wetting time of the tablets was found to be in the range of 49.92±0.11 to 140±0.18s. The In vitro wetting time was less (i.e., 74±0.37s) in optimized formulation F8. The water absorption ratio of the formulated tablets was found to be in the range of 27.58±0.01 to 123.07±0.33%. The percent drug dissolved in the optimized formulation F8 was found to be 99.83% in 10 min. Conclusion: Starch crotonate, when combined with sodium starch glycolate, croscarmellose sodium, with Piroxicam was found to be an effective super disintegrant which improved the dissolution efficiency and could therefore be used in the formulation of quick dissolving tablets to provide immediate release of the contained drug within 10 min.

scholarly journals OPTIMIZATION OF STARCH GLYCOLATE AS NOVEL SUPERDISINTEGRANT IN THE FORMULATION OF GLIPIZIDE FAST DISSOLVING TABLETS THROUGH 23FACTORIAL DESIGN

2021 ◽  
pp. 244-251
Author(s):  
A. HARI OM PRAKASH RAO ◽  
R. SANTOSH KUMAR ◽  
SHAMBHAVI KANDUKURI ◽  
M. RAMYA
Keyword(s):  
Direct Compression ◽  
Factorial Designs ◽  
Therapeutic Action ◽  
Compression Method ◽  
Disintegration Time ◽  
23 Factorial Design ◽  
Sodium Starch Glycolate ◽  
Wetting Time ◽  
Dissolution Efficiency

Objective: To synthesize, characterize and evaluate starch glycolate as a superdisintegrant in the formulation of Glipizide fast dissolving tablets by employing 23 factorial designs. Methods: Starch glycolate was prepared and its physical and micromeritic properties were performed to evaluate it. The fast dissolving tablet of Glipizide was prepared by employing starch crotonate as a superdisintegrant in different proportions in each case by direct compression method using 23 factorial design for the evaluation of tablet parameters like disintegration and dissolution efficiency in 5 min. Results: The starch glycolate prepared was found to be fine, free-flowing and amorphous. Starch glycolate exhibited good swelling in water with a swelling index (10%). The study of starch glycolate was shown by fourier transform infrared spectra (FTIR). The drug content (100±5%), hardness (3.5–4 kg/sq. cm), and friability (<0.15%) was been effective with regard to all the formulated fast dissolving tablets employing starch glycolate. The disintegration time of all the formulated tablets was found to be in the range of 13±0.015 to 180±0.014 sec. The optimized formulation F8 had the least disintegration time i.e., 13±0.015 sec. The wetting time of the tablets was found to be in the range of 8±0.015 to 95±0.013 sec. The In vitro wetting time was less (i.e., 8±0.015s) in optimized formulation F8. The water absorption ratio of the formulated tablets was found to be in the range of 75±0.012 to 150±0.014%. The percent drug dissolved in the optimized formulation F8 was found to be 99.95% in 5 min. Conclusion: Starch glycolate was an efficient superdisintegrant for fast-dissolving tablets. The disintegration and dissolution efficiency of the fast dissolving tablets of glipizide was good and depended on the concentration of superdisintegrant employed i.e., starch glycolate, sodium starch glycolate, crospovidone. The formulated fast dissolving tablets of glipizide exhibited good dissolution efficiency in 5 min which can be used for the fast therapeutic action of glipizide.

scholarly journals Development and evaluation of mosapride citrate orally disintegrating tablets for dogs

2016 ◽  
Vol 46 (11) ◽  
pp. 2064-2069
Author(s):  
Tingting Yi
Keyword(s):  
Low Cost ◽  
Direct Compression ◽  
Compression Method ◽  
Disintegration Time ◽  
Mosapride Citrate ◽  
Orally Disintegrating Tablets ◽  
Croscarmellose Sodium ◽  
Sodium Carboxymethyl Starch ◽  
In Vitro Disintegration

ABSTRACT: The purpose of the study was to prepare orally disintegrating tablets (ODTs) of mosapride citrate for dogs with fast disintegration and low cost. The ODTs were developed by varying the components and the ratio of excipients. A direct compression method was used. The properties of the ODTs, including hardness, friability, active ingredient content, and in vitro disintegration time, were investigated, and an economic analysis of the formulations was performed. For all formulations, friability was less than 1%, and the hardness varied from 37.69±4.08 to 48.73±5.62 N, which indicated that the tablets had sufficient mechanical integrity to withstand packaging and carrying. Results showed that Formulation (F) 2, containing 5% sodium carboxymethyl starch; F3, containing 5% low-substituted hydroxypropylcellulose; and F5 had not only shorter disintegration times but also lower costs, which were suitable for mosapride citrate ODTs. Although F1, contained 5% croscarmellose sodium, and F4, contained 5% crospovidone, with shorter disintegration times, the costs of F1 and F4 were 25.8% and 22.6% higher than that of F5, respectively. Results also revealed that the disintegration time of F5 was not significantly different from those of F1, F2, F3, and F4 (p>0.05), all of which contained superdisintegrants. Without superdisintegrants, F5, which contained a mixture of microcrystalline cellulose, mannitol, and lactose, was also able to achieve a short disintegration time and to meet the requirements of ODTs for dogs.

Formulation and Evaluation of Orally Disintegrating Tablets of Lamotrigine

2015 ◽  
Vol 8 (2) ◽  
pp. 2881-2888
Author(s):  
Sudarshan Singh ◽  
S S Shyale ◽  
P Karade
Keyword(s):  
Drug Release ◽  
Water Soluble ◽  
In Vitro Dissolution ◽  
Disintegration Time ◽  
Orally Disintegrating Tablet ◽  
Drug Content ◽  
Weight Variation ◽  
Wetting Time ◽  
Croscarmellose Sodium

The aim of this study was to design orally disintegrating tablet (ODT) of Lamotrigine. It is an Antiepileptic drug which is widely used in epilepsy. It is also used in simple and complex partial seizures and secondary generalized tonic-clonic seizures. It is poorly water soluble drug (0.46 mg/ml). Thus, an attempt was made to enhance the water solubility by complexation with β-cyclodextrin (1:1 molar ratios). The orally disintegrating tablet of lamotrigine was prepared by direct compression method using different concentration of superdisintegrants such as Sodium starch glycollate, croscarmellose sodium by sublimating agent such as camphor. The formulations were evaluated for weight variation, hardness, friability, drug content, wetting time, in vitro disintegration time and in vitro dissolution studies. The prepared tablets were characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry. The disintegration time for the complexed tablets prepared by different concentration of superdisintegrants was found to be in range of 32.54 ± 0.50 to 55.12 ± 0.57 sec and wetting time of the formulations was found to be in range of 28.47 ± 0.67 to 52.19 ± 0.72 sec. All the formulation showed almost 100 percent of drug release within 15 min. Among all the formulation F6 and F7 prepared with 18% croscarmellose sodium and camphor shows faster drug release, respectively 10 min, F6 gives good result for disintegration time, drug release, wetting time and friability. Further formulations were subjected to stability testing for 30 days at temperature of 40 ± 5 ºC/75 ± 5 %RH. Tablets showed no appreciable changes with respect to physical appearance, drug content, disintegration time and dissolution profiles. Results were statistically analyzed by one-way ANOVA at a p < 0.05. It was found that, the data at any point of time are significant at p < 0.05.

scholarly journals FORMULATION AND EVALUATION OF ORAL FAST DISINTEGRATING TABLET OF IBUPROFEN USING TWO SUPER DISINTEGRANTS

2017 ◽  
Vol 9 (4) ◽  
pp. 92
Author(s):  
Hrishav Das Purkayastha ◽  
Bipul Nath
Keyword(s):  
Drug Release ◽  
Magnesium Stearate ◽  
Direct Compression ◽  
Compression Method ◽  
Disintegration Time ◽  
Orally Disintegrating Tablet ◽  
Rapid Release ◽  
Weight Variation ◽  
Fast Disintegrating Tablet

Objective: The aim of the present investigation was to design and evaluate orally disintegrating tablet (ODT) of Ibuprofen, a NSAID drug used for the treatment of arthritis with a view to improve its oral bioavailability. The focus of the current study was to develop ODT of Ibuprofen using super disintegrants for ease of administration and its physicochemical characterization.Methods: Tablets were made from blends by direct compression method. All the ingredients were passed through mesh no. 80. All the ingredients were co-ground in a pestle motor. The resulting blend was lubricated with magnesium stearate and compressed into tablets using the Cadmach single punch (round shaped, 8 mm thick) machine.Results: Physicals parameters of the prepared tablets like Hardness, Weight variation, Friability, thickness, drug content etc. found within the limits. The disintegration time of prepared ODTs was in the range of 45 to 55 seconds. In vitro dispersion time was found to be 22 to 52 seconds which may be attributed to faster uptake of water due to the porous structure formed by super disintegrants. Short disintegration and faster release of ibuprofen were observed with Cross carmellose sodium as compared to sodium starch glycollate.Conclusion: It is concluded that F3 offered the relatively rapid release of Ibuprofen when compared with other formulations. The increase in the concentrations of super disintegrants may lead to increase in the drug release. The formulation prepared with cross carmellose sodium was offered the relatively rapid release of Ibuprofen when compared with other concentrations of both the super disintegrant. 

scholarly journals Formulation and evaluation of taste masked oral disintegrating tablets of lornoxicam

2021 ◽  
Vol 11 (5) ◽  
pp. 115-120
Author(s):  
Kritika Rai ◽  
Vivek Jain ◽  
Sunil Kumar Jain ◽  
Pushpendra Kumar Khangar
Keyword(s):  
Cation Exchange Resin ◽  
The Elderly ◽  
In Vitro Dissolution ◽  
Taste Masking ◽  
Direct Compression ◽  
Compression Technique ◽  
Disintegration Time ◽  
Weight Variation ◽  
Croscarmellose Sodium

Orally disintegrating tablets (ODT) disintegrate quickly with saliva when administered into the oral cavity and taken without water or chewed. ODT are easy to take for children and the elderly, who may experience difficultly in taking ordinary oral preparations such as tablets, capsules, and powders.  The ODT threes substantial benefits for the patient (or elder) who cannot swallow (Dysphagia), or who is not permitted water intake due to disease. The reason of the current research was to prepare taste masking oral disintegrating tablets of poorly soluble lornoxicam (LXM) by direct compression technique using Kyron T-114 (cation exchange resin) as a taste masking agent. With in various ratios the Drug-resin of 1:4 was established to present best taste masking. The superdisintegrants used in formulation are croscarmellose sodium and cross povidone. Among these croscarmellose sodium demonstrated superior drug release. The tablets were evaluated for friability, weight variation, wetting time, hardness, disintegration time and uniformity of content. Optimized formulations were evaluated for in vitro dissolution test. Amongst all the formulations F-6 was found to be most successful tablets prepared by this technique had disintegration time of 30sec and % CDR 94.78 within 30min. Hence, this advance can be utilized for taste masking of bitter pharmaceutical ingredients leading to superior patient compliance. Keywords: Oral disintegration tablets, Lornoxicam, Kyron T-114, Superdisintegrants, Direct Compression.

scholarly journals Formulation design, optimization & in vitro evaluation of novel orodissolving tablets of efavirenz for hiv infections

2015 ◽  
Vol 49 (3) ◽  
pp. 173-180
Author(s):  
T Ayyappan ◽  
C Poojitha ◽  
T Vetrichelvan
Keyword(s):  
Drug Release ◽  
In Vitro Dissolution ◽  
Dissolution Time ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Sodium Starch Glycolate ◽  
Weight Variation ◽  
Wetting Time

In the present work, orodissolving tablets of Efavirenz were prepared by direct compression method with a view to enhance patient compliance. A 23 full factorial design was applied to investigate the combined effect of three formulation variables. Amount of crospovidone, croscarmellose sodium and sodium starch glycolate were used as superdisintegrant material along with direct compressible mannitol to enhance mouth feel. The prepared batches of tablets were evaluated for hardness, friability, weight variation, disintegration time, wetting time, drug content and in-vitro dissolution studies. Based on wetting time, disintegration time, the formulation containing crospovidone (5% w/v), carscarmellose sodium (5% w/v) and sodium starch glycolate (8% w/v) was found to be promising and tested for in-vitro drug release pattern (in 0.1 N HCl), short term stability and drug- superdisintegrants interaction. Surface response plots are presented to graphically represent the effect of independent variables (conc. of superdisintegrants) on the in-vitro dissolution time. The validity of the generated mathematical model was tested by preparing extra-design check point formulation. The formulation showed nearly faster drug release compared to the conventional commercial tablet formulation. Stability studies on the optimized formulation indicated that there was no significant change found in physical appearance, hardness, disintegration time, drug content and in-vitro drug release. DOI: http://dx.doi.org/10.3329/bjsir.v49i3.22131 Bangladesh J. Sci. Ind. Res. 49(3), 173-180, 2014

scholarly journals FORMULATION DEVELOPMENT AND EVALUATION OF FAST DISINTEGRATING TABLETS OF CINITAPRIDE HYDROGEN TARTARATE BY USING DIRECT COMPRESSION TECHNIQUE

2017 ◽  
Vol 9 (6) ◽  
pp. 98 ◽  
Author(s):  
Krishna Mohan Chinnala ◽  
Sirish Vodithala
Keyword(s):  
Drug Release ◽  
Water Absorption ◽  
Bulk Density ◽  
Direct Compression ◽  
Disintegration Time ◽  
Absorption Ratio ◽  
Wetting Time ◽  
Tapped Density ◽  
Fast Disintegrating Tablets

Objective: In the present study, efforts were taken to develop fast disintegrating tablets of Cinitapride hydrogen tartrate, is a gastro-prokinetic agent and antiulcer agent with an objective to achieve rapid disintegration, and further improving the bioavailability of the drug. Also, to resolve the swallowing problems (Dysphasia) in pediatric, geriatric patients by rapid disintegration in saliva and improve the patient compliance.Methods: Fast disintegrating tablets were prepared by direct compression method using superdisintegrants like crospovidone (CP), croscarmellose sodium (CCS), sodium starch glycolate (SSG) and combination of super-disintegrants in different concentrations. The prepared formulations were evaluated for the pre-compression parameters like bulk density, tapped density, Carr’s compressibility, Hausner’s ratio and angle of repose. The prepared batches of fast disintegrating tablets of Cinitapride hydrogen tartarate were evaluated for hardness, weight variation, thickness, friability, drug content, disintegration time, wetting time, water absorption ratio, and in vitro dissolution profile.Results: Bulk density and tapped density were found in the range of 0.412–0.432 g/cc and 0.507–0.528 g/cc respectively. In all formulations, tablet weight and thickness were within mean±9.5% and mean±5% respectively. Wetting time values lie between 19.76 to 39.53 sec. Water absorption ratio ranged from 57.30 to 78.82 %. The in vitro disintegration time for all the 12 formulations varied from 17.43 to 38.61 seconds. Formulation F8 which contained crosspovidone have recorded drug release 96.94±0.47% at the end of 30 min.Conclusion: The formulation containing crospovidone (F8) showed better performance in terms of disintegration time and drug release when compared to other formulations.

Formulation and Evaluation of Oro Dispersible Tablets of Ondansetron Hydrochloride by Direct Compression using Superdisintegrants

1970 ◽  
Vol 1 (1) ◽  
pp. 106-111
Author(s):  
Avani R. Gosai ◽  
Sanjay B. Patil ◽  
Krutika K. Sawant
Keyword(s):  
Mechanical Strength ◽  
Direct Compression ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Weight Variation ◽  
Ondansetron Hydrochloride ◽  
Dispersible Tablets ◽  
In Vitro Disintegration

The objective of the present investigation was to prepare oro dispersible tablets of ondansetron hydrochloride, because of its application in emesis condition, fast onset of action and avoidance of water is highly desirable. Tablets were prepared by direct compression using sodium starch glycolate and croscarmellose as superdisintegrants, as the combination of these two agents gives better disintegration of the tablet. Microcrystalline cellulose was used as diluent and mannitol, mint flavor, sodium saccharine to enhance the organoleptic properties of tablets. The tablets were evaluated for weight variation, mechanical strength, in vitro disintegration time, in vivo disintegration time, wetting time, and drug release characteristics. Hardness and friability data indicated good mechanical strength of tablets.  The results of in vitro disintegration time and in vivo disintegration time indicated that the tablets dispersed rapidly in mouth within 3 to 5 seconds. Dissolution study revealed faster release rate of ondansetron hydrochloride from the tablets as compared to pure drug and marketed conventional tablet formulation of ondansetron hydrochloride. It was concluded that superdisintegrants addition technique is a useful method for preparing oro dispersible tablets by direct compression method

Sign in / Sign up

Export Citation Format

Share Document