scholarly journals Development and evaluation of mosapride citrate orally disintegrating tablets for dogs

2016 ◽  
Vol 46 (11) ◽  
pp. 2064-2069
Author(s):  
Tingting Yi
Keyword(s):  
Low Cost ◽  
Direct Compression ◽  
Compression Method ◽  
Disintegration Time ◽  
Mosapride Citrate ◽  
Orally Disintegrating Tablets ◽  
Croscarmellose Sodium ◽  
Sodium Carboxymethyl Starch ◽  
In Vitro Disintegration

ABSTRACT: The purpose of the study was to prepare orally disintegrating tablets (ODTs) of mosapride citrate for dogs with fast disintegration and low cost. The ODTs were developed by varying the components and the ratio of excipients. A direct compression method was used. The properties of the ODTs, including hardness, friability, active ingredient content, and in vitro disintegration time, were investigated, and an economic analysis of the formulations was performed. For all formulations, friability was less than 1%, and the hardness varied from 37.69±4.08 to 48.73±5.62 N, which indicated that the tablets had sufficient mechanical integrity to withstand packaging and carrying. Results showed that Formulation (F) 2, containing 5% sodium carboxymethyl starch; F3, containing 5% low-substituted hydroxypropylcellulose; and F5 had not only shorter disintegration times but also lower costs, which were suitable for mosapride citrate ODTs. Although F1, contained 5% croscarmellose sodium, and F4, contained 5% crospovidone, with shorter disintegration times, the costs of F1 and F4 were 25.8% and 22.6% higher than that of F5, respectively. Results also revealed that the disintegration time of F5 was not significantly different from those of F1, F2, F3, and F4 (p>0.05), all of which contained superdisintegrants. Without superdisintegrants, F5, which contained a mixture of microcrystalline cellulose, mannitol, and lactose, was also able to achieve a short disintegration time and to meet the requirements of ODTs for dogs.

scholarly journals Formulation, Characterization and In-vitro Evaluation of Cetrizine HCL Oral Disintegrating Tablets

1970 ◽  
Vol 7 (5) ◽  
pp. 19-24
Author(s):  
HARITHA PASUPULATI ◽  
Y PHALGUNA ◽  
SANDHYA RUDRA
Keyword(s):  
Bulk Density ◽  
Direct Compression ◽  
Compression Method ◽  
Disintegration Time ◽  
Sodium Starch Glycolate ◽  
Weight Variation ◽  
Wetting Time ◽  
Croscarmellose Sodium ◽  
In Vitro Disintegration

The main objective of this work is to formulate and evaluate Cetirizine HCl MFDT’s using different concentrations of superdisintegrants like croscarmellose sodium (CCS), sodium starch glycolate (SSG) and their combinations in different ratios. The in vitro disintegration time of Cetrizine Hcl prepared by direct compression method by super disintegrates were found to be in the range of 18 to 11sec fulfilling the official requirements. The bulk density and tapped bulk density for the entire formulation blend varied from 0.508 gm/cc to 0.5438 gm/cc and 0.5941 to 0.6408 respectively. The friability was found in all designed formulations in the range 0.42 to 0.74% to be well within the approved range (<1%). The weight variation was found in all designed formulation in the range 97 to 102 mg. The wetting time were found to be in the range of 11 to 18sec. Water absorption ratio for all the formulations found in the range 11 to 16%.combination of sodium starch glycolate and cross carmellose sodium (6% of 25%-ssg&75%ccs)) promotes dissolution rate of drug release when compared to formulation of SSG & CCS alone. It may be due to capillary and wicking mechanism of SSG & CCS.   Keywords:   

scholarly journals Formulation and evaluation of oral disintegrating tablets of furosemide

2021 ◽  
pp. 149-156
Author(s):  
Manish Khadka ◽  
Dharma Prasad Khanal ◽  
Deepti Piya Baniya ◽  
Prakash Karki ◽  
Saurav Shrestha
Keyword(s):  
In Vitro Dissolution ◽  
Direct Compression ◽  
Compression Method ◽  
Drug Molecule ◽  
Disintegration Time ◽  
Sodium Starch Glycolate ◽  
Ftir Studies ◽  
Orally Disintegrating Tablets ◽  
Dissolution Properties

Orally disintegrating tablets of Furosemide were prepared, evaluated and the comparison of the action of different concentrations of disintegrants on disintegration and dissolution of the tablets were studied. Direct compression method was used to prepare the orally disintegrating tablets containing 20 mg of Furosemide. The formulation was conducted using different concentrations of crospovidone, croscarmellose and sodium starch glycolate as superdisintegrants and their interactions with Furosemide were also evaluated using FTIR.  FTIR studies using the drug and its mixtures with the excipients showed that the peaks correlate with one another which signify that there is no interaction between the drug molecule and the excipients used. The obtained results revealed that the disintegration time of ODTs were between 9 to 59 seconds. The percentage drug content of tablets in all the formulations was found between 91.51% to 106.69%, which complies with the limits established in pharmacopoeia. The in-vitro dissolution studies show maximum release of 89.47% in formulation F3 and minimum of 77.64% in formulation F12. Higher concentration of crospovidone and croscarmellose in formulations F3 and F6 showed better dissolution properties than SSG. So by varying the concentrations of superdisintegrants, oral disintegrating tablets can be formulated.

scholarly journals FORMULATION AND EVALUATION OF ORAL FAST DISINTEGRATING TABLET OF IBUPROFEN USING TWO SUPER DISINTEGRANTS

2017 ◽  
Vol 9 (4) ◽  
pp. 92
Author(s):  
Hrishav Das Purkayastha ◽  
Bipul Nath
Keyword(s):  
Drug Release ◽  
Magnesium Stearate ◽  
Direct Compression ◽  
Compression Method ◽  
Disintegration Time ◽  
Orally Disintegrating Tablet ◽  
Rapid Release ◽  
Weight Variation ◽  
Fast Disintegrating Tablet

Objective: The aim of the present investigation was to design and evaluate orally disintegrating tablet (ODT) of Ibuprofen, a NSAID drug used for the treatment of arthritis with a view to improve its oral bioavailability. The focus of the current study was to develop ODT of Ibuprofen using super disintegrants for ease of administration and its physicochemical characterization.Methods: Tablets were made from blends by direct compression method. All the ingredients were passed through mesh no. 80. All the ingredients were co-ground in a pestle motor. The resulting blend was lubricated with magnesium stearate and compressed into tablets using the Cadmach single punch (round shaped, 8 mm thick) machine.Results: Physicals parameters of the prepared tablets like Hardness, Weight variation, Friability, thickness, drug content etc. found within the limits. The disintegration time of prepared ODTs was in the range of 45 to 55 seconds. In vitro dispersion time was found to be 22 to 52 seconds which may be attributed to faster uptake of water due to the porous structure formed by super disintegrants. Short disintegration and faster release of ibuprofen were observed with Cross carmellose sodium as compared to sodium starch glycollate.Conclusion: It is concluded that F3 offered the relatively rapid release of Ibuprofen when compared with other formulations. The increase in the concentrations of super disintegrants may lead to increase in the drug release. The formulation prepared with cross carmellose sodium was offered the relatively rapid release of Ibuprofen when compared with other concentrations of both the super disintegrant. 

scholarly journals Formulation and evaluation of taste masked oral disintegrating tablets of lornoxicam

2021 ◽  
Vol 11 (5) ◽  
pp. 115-120
Author(s):  
Kritika Rai ◽  
Vivek Jain ◽  
Sunil Kumar Jain ◽  
Pushpendra Kumar Khangar
Keyword(s):  
Cation Exchange Resin ◽  
The Elderly ◽  
In Vitro Dissolution ◽  
Taste Masking ◽  
Direct Compression ◽  
Compression Technique ◽  
Disintegration Time ◽  
Weight Variation ◽  
Croscarmellose Sodium

Orally disintegrating tablets (ODT) disintegrate quickly with saliva when administered into the oral cavity and taken without water or chewed. ODT are easy to take for children and the elderly, who may experience difficultly in taking ordinary oral preparations such as tablets, capsules, and powders.  The ODT threes substantial benefits for the patient (or elder) who cannot swallow (Dysphagia), or who is not permitted water intake due to disease. The reason of the current research was to prepare taste masking oral disintegrating tablets of poorly soluble lornoxicam (LXM) by direct compression technique using Kyron T-114 (cation exchange resin) as a taste masking agent. With in various ratios the Drug-resin of 1:4 was established to present best taste masking. The superdisintegrants used in formulation are croscarmellose sodium and cross povidone. Among these croscarmellose sodium demonstrated superior drug release. The tablets were evaluated for friability, weight variation, wetting time, hardness, disintegration time and uniformity of content. Optimized formulations were evaluated for in vitro dissolution test. Amongst all the formulations F-6 was found to be most successful tablets prepared by this technique had disintegration time of 30sec and % CDR 94.78 within 30min. Hence, this advance can be utilized for taste masking of bitter pharmaceutical ingredients leading to superior patient compliance. Keywords: Oral disintegration tablets, Lornoxicam, Kyron T-114, Superdisintegrants, Direct Compression.

scholarly journals Preparation and evaluation of diclofenac sodium orally disintegrating tablets

2016 ◽  
Vol 27 (1) ◽  
pp. 58-61
Author(s):  
Valeriu Iancu ◽  
Florentina Roncea ◽  
Radu George Cazacincu ◽  
Dumitru Lupuleasa
Keyword(s):  
Diclofenac Sodium ◽  
Magnesium Stearate ◽  
Dosage Forms ◽  
Direct Compression ◽  
Compression Method ◽  
Disintegration Time ◽  
Orodispersible Tablets ◽  
Orally Disintegrating Tablets ◽  
Wetting Time ◽  
Preparation And Evaluation

Abstract Orally disintegrating tablets (ODTs) are dosage forms which disintegrate in mouth within seconds without need of water. This type of quality in dosage form can be attained by addition of different varieties of excipients. Pharmaburst™ 500 is a co-processed excipient system which allows rapid disintegration and low adhesion to punches. The aim of the present study was to develop and evaluate 25 mg diclofenac sodium ODTs (orodispersible tablets) batches by direct compression method at different compression forces 10 kN (F1) and 20 kN (F2) and directly compressible excipients used in different ratio (Avicel PH 102, magnesium stearate and coprocessed excipient Pharmaburst™ 500, 70% and 80% w/w). The obtained batches were analyzed for appearance, tablet thickness, uniformity of weight, hardness, friability, disintegration time, and non-compendial methods (wetting time). Co-processed Pharmaburst™ 500 excipient 70% used for sodium diclofenac ODT obtaining determined good results for quality control tests evaluation.

scholarly journals DESIGN, OPTIMIZATION AND EVALUATION OF ACECLOFENAC FAST DISSOLVING TABLETS EMPLOYING STARCH VALERATE–A NOVEL SUPERDISINTEGRANT

2021 ◽  
pp. 168-176
Author(s):  
R. SANTOSH KUMAR ◽  
SHAMBHAVI KANDUKURI ◽  
M. RAMYA ◽  
B. KUSUMA LATHA
Keyword(s):  
Factorial Design ◽  
Immediate Release ◽  
Compression Method ◽  
Disintegration Time ◽  
23 Factorial Design ◽  
Sodium Starch Glycolate ◽  
Wetting Time ◽  
Croscarmellose Sodium ◽  
Dissolution Efficiency

Objective: To synthesize, characterize and evaluate starch valerate as a superdisintegrant in the formulation of aceclofenac fast dissolving tablets by employing 23 factorial design. Methods: Starch valerate was synthesized and its physical and micromeritic properties were performed to evaluate it. The fast dissolving tablet of aceclofenac was prepared by employing starch valerate as a superdisintegrant in different proportions in each case by direct compression method using 23 factorial design for evaluation of tablet parameters like disintegration and dissolution efficiency in 5 min. Results: The starch valerate prepared was found to be fine, amorphous and free flowing. Starch valerate exhibited good swelling in water with swelling index (125.2%). The study of starch valerate was shown by fourier transform infrared spectra (FTIR). The drug content (200±5%), hardness (3.5–4 kg/sq. cm), and friability (<0.15%) has been effective with regard to all the formulated fast dissolving tablets employing starch valerate. The disintegration time of all the formulated tablets was found to be in the range of 14±0.04 to 25.7±0.02 sec. The optimized formulation F4 had the least disintegration time i.e., 12.8±0.02 sec. The wetting time of the tablets was found to be in the range of 76±0.21 to 217±0.17s. The In vitro wetting time was less (i.e., 28±0.02s) in optimized formulation F4. The water absorption ratio of the formulated tablets was found to be in the range of 46±0.12 to 100±0.27%. The percent drug dissolved in the optimized formulation F8 was found to be 99.93% in 5 min. Conclusion: Starch valerate, when combined with sodium starch glycolate, croscarmellose sodium, with aceclofenac, was found to be an effective super disintegrant which improved the dissolution efficiency and could therefore be used in the formulation of quick dissolving tablets to provide immediate release of the contained drug within 5 min.

scholarly journals Formulation and in vitro evaluation of orodispersible tablets of fexofenadine hydrochloride

2020 ◽  
Vol 19 (5) ◽  
pp. 919-925
Author(s):  
Durgaramani Sivadasan ◽  
Muhammad Hadi Sultan ◽  
Osama Madkhali ◽  
Shamama Javed ◽  
Aamena Jabeen
Keyword(s):  
Guar Gum ◽  
Polymer Concentration ◽  
In Vitro Release ◽  
Direct Compression ◽  
Compression Technique ◽  
Disintegration Time ◽  
Weight Fluctuation ◽  
Orodispersible Tablets ◽  
Croscarmellose Sodium

Purpose: To develop orodispersible tablets (ODTs) of fexofenadine hydrochloride using three different superdisintegrants in various ratios and to compare their disintegration properties.Methods: Direct compression technique was used for the preparation of ODTs. Mannitol and Avicel CE-15 (microcrystalline cellulose and guar gum) were used as direct compression diluents. The disintegration time of tablets using each polymer (superdisintegrant) was evaluated as well as othertablet properties including weight fluctuation, hardness, friability, wetting time and water absorption ratio.Results: Satisfactory values were obtained for all the evaluated parameters. As the polymer concentration increased, there was a decrease in disintegration time. A comparison of the three different polymers used revealed that CCM3 formulated with 12 % croscarmellose sodium and 14.66 % lactose had the least disintegration time of 32.33 ± 3.23 s. In vitro release studies showed that the maximum drug release of 94.38 ± 0.12 % in 25 min was obtained for ODT tablets containing croscarmellose sodium (CCM3).Conclusion: The orodispersible tablets had quick disintegrating property which was achieved using superdisintegrants. Thus, superdisintegrants improve the disintegration efficiency of orodispersible fexofenadine tablets at low concentrations, when compared to traditional disintegrants. Keywords: Croscarmellose sodium, Direct compression, Fexofenadine, Orodispersible tablets

Formulation and Evaluation of Oro Dispersible Tablets of Ondansetron Hydrochloride by Direct Compression using Superdisintegrants

1970 ◽  
Vol 1 (1) ◽  
pp. 106-111
Author(s):  
Avani R. Gosai ◽  
Sanjay B. Patil ◽  
Krutika K. Sawant
Keyword(s):  
Mechanical Strength ◽  
Direct Compression ◽  
Onset Of Action ◽  
Disintegration Time ◽  
Weight Variation ◽  
Ondansetron Hydrochloride ◽  
Dispersible Tablets ◽  
In Vitro Disintegration

The objective of the present investigation was to prepare oro dispersible tablets of ondansetron hydrochloride, because of its application in emesis condition, fast onset of action and avoidance of water is highly desirable. Tablets were prepared by direct compression using sodium starch glycolate and croscarmellose as superdisintegrants, as the combination of these two agents gives better disintegration of the tablet. Microcrystalline cellulose was used as diluent and mannitol, mint flavor, sodium saccharine to enhance the organoleptic properties of tablets. The tablets were evaluated for weight variation, mechanical strength, in vitro disintegration time, in vivo disintegration time, wetting time, and drug release characteristics. Hardness and friability data indicated good mechanical strength of tablets.  The results of in vitro disintegration time and in vivo disintegration time indicated that the tablets dispersed rapidly in mouth within 3 to 5 seconds. Dissolution study revealed faster release rate of ondansetron hydrochloride from the tablets as compared to pure drug and marketed conventional tablet formulation of ondansetron hydrochloride. It was concluded that superdisintegrants addition technique is a useful method for preparing oro dispersible tablets by direct compression method

Formulation and Evaluation of Fast Dissolving Tablet of Ondansetron by Utilizing Liquisolid Compact Technique

2021 ◽  
pp. 163-168
Author(s):  
Sanket Jain ◽  
Sujit Pillai ◽  
Rampal Singh Mandloi ◽  
Nikhlesh Birla
Keyword(s):  
Drug Release ◽  
In Vitro Dissolution ◽  
Direct Compression ◽  
Compression Method ◽  
Disintegration Time ◽  
Dissolution Studies ◽  
Drug Content ◽  
Ftir Studies ◽  
Site Of Action

Ondansetron is an anti-emetic drug which is insoluble in water. The present study was aimed to formulate and evaluate oral fast dissolving tablet of Ondansetron by Utilizing Liquisolid Compact Technique. The tablets were prepared by direct compression method and characterized by UV, FTIR studies. Six formulations (F1-F6) of ondansetron were prepared and tablets were evaluated for weight variations, hardness, thickness, friability, disintegration time, drug content and In-vitro dissolution studies gave satisfactory result. TF6 was found to be the best and acceptable formulation whose drug content was about 99.17±0.05 and percentage (%) drug release 97.49±2.03 in 10 min, high as compare to other formulation and has low disintegration time 17±0.01 as compare to other formulation which indicates that drug is rapidly dissolved and available at the site of action.

scholarly journals OPTIMIZATION OF STARCH CROTONATE AS A NOVEL SUPERDISINTEGRANT IN THE FORMULATION OF FAST DISSOLVING TABLETS THROUGH 23 FACTORIAL DESIGN

2021 ◽  
pp. 247-256
Author(s):  
A. HARI OM PRAKASH RAO ◽  
SANTOSH KUMAR RADA ◽  
SHAMBHAVI KANDUKURI
Keyword(s):  
Factorial Design ◽  
Immediate Release ◽  
Compression Method ◽  
Disintegration Time ◽  
23 Factorial Design ◽  
Sodium Starch Glycolate ◽  
Wetting Time ◽  
Croscarmellose Sodium ◽  
Dissolution Efficiency

Objective: To synthesize, characterize and evaluate starch crotonate as a superdisintegrant in the formulation of Piroxicam fast dissolving tablets by employing 23 factorial design. Methods: Starch crotonate was synthesized and its physical and micromeritic properties were performed to evaluate it. The fast dissolving tablet of Piroxicam were prepared by employing starch crotonate as a superdisintegrant in different proportions in each case by direct compression method using 23 factorial design. Results: The starch chrotonate prepared was found to be fine, free flowing and amorphous. Starch crotonate exhibited good swelling in water with swelling index (50%). The study of starch crotonate was shown by fourier transform infrared spectra (FTIR). The drug content (100±5%), hardness (3.6–4 kg/sq. cm), and friability (<0.15%) have been effective with regard to all the formulated fast dissolving tablets employing starch crotonate. The disintegration time of all the formulated tablets was found to be in the range of 18±03 to 66±03 sec. The optimized formulation F8 had the least disintegration time i.e., 18±03 sec. The wetting time of the tablets was found to be in the range of 49.92±0.11 to 140±0.18s. The In vitro wetting time was less (i.e., 74±0.37s) in optimized formulation F8. The water absorption ratio of the formulated tablets was found to be in the range of 27.58±0.01 to 123.07±0.33%. The percent drug dissolved in the optimized formulation F8 was found to be 99.83% in 10 min. Conclusion: Starch crotonate, when combined with sodium starch glycolate, croscarmellose sodium, with Piroxicam was found to be an effective super disintegrant which improved the dissolution efficiency and could therefore be used in the formulation of quick dissolving tablets to provide immediate release of the contained drug within 10 min.

Sign in / Sign up

Export Citation Format

Share Document