scholarly journals CO2 capture and storage in Greece: A case study from komotini ngcc power plant

2006 ◽  
Vol 10 (3) ◽  
pp. 71-80
Author(s):  
Nikolaos Koukouzas ◽  
Paraskevas Klimantos ◽  
Prokopis Stogiannis ◽  
Emmanouel Kakaras
Keyword(s):  
Power Plant ◽  
Co2 Capture ◽  
Energy Demand ◽  
Power Plants ◽  
Fossil Fuel ◽  
Substantial Reduction ◽  
Plant Performance ◽  
Electricity Production ◽  
Electricity Production Cost ◽  
And Storage

The aim of this paper is to examine the possibilities for the abatement of CO2 emissions in the Greek fossil fuel power generation sector. An overview of CO2 capture, transportation, and storage concepts, on which the R&D community is focused, is presented. The implementation of post-combustion CO2 capture options in an existing fossil fuel power plant is then examined and the consequences on the overall plant performance are determined. Finally, the possibilities of transportation and then underground storage of the pure CO2 stream are analyzed taking into account both technical and economical factors. The results of this analysis show that CO2 sequestration is technically feasible for existing fossil fuel fired power plants in Greece. However, substantial reduction in plant efficiency is observed due to increased energy demand of the technologies used as well as in electricity production cost due to capital and operation costs of capture, transport, and storage of CO2. .

CO2 Capture for Power Plants: An Analysis of the Energetic Requirements by Chemical Absorption

2006 ◽  
Author(s):  
Ana R. Diaz
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Co2 Capture ◽  
Power Plants ◽  
Fossil Fuel ◽  
Plant Performance ◽  
Energy Requirements ◽  
Co2 Absorption ◽  
Chemical Absorption ◽  
Technical Effort

The tendency in the world energy demand seems clear: it can only grow. The energetic industry will satisfy this demand-despite all its dialectic about new technologies-at least medium term mostly with current fossil fuel technologies. In this picture from an engineer’s point of view, one of the primary criterions for mitigating the effects of increasing atmospheric concentration of CO2 is to restrict the CO2 fossil fuel emissions into the atmosphere. This paper is focused on the analysis of different CO2 capture technologies for power plants. Indeed, one of the most important goal to concentrate on is the CO2 capture energy requirements, as it dictates the net size of the power plant and, hence, the net cost of power generation with CO2 avoidance technologies. Here, the Author presents a critical review of different CO2 absorption capture technologies. These technologies have been widely analyzed in the literature under chemical and economic points of view, leaving their impact on the energy power plant performance in a second plan. Thus, the central question examined in this paper is the connection between abatement capability and its energetic requirements, which seriously decrease power generation efficiency. Evidencing that the CO2 capture needs additional technical effort and establishing that further developments in this area must be constrained by reducing its energy requirements. After a comprehensive literature revision, six different chemical absorption methods are analyzed based on a simplified energetic model, in order to account for its energetic costs. Furthermore, an application case study is provided where the different CO2 capture systems studied are coupled to a natural gas cogeneration power plant.

The Effect of Fossil Fuel Prices on Flexible CO2 Capture Operation

2009 ◽  
Author(s):  
Stuart M. Cohen ◽  
John Fyffe ◽  
Gary T. Rochelle ◽  
Michael E. Webber
Keyword(s):  
Power Plant ◽  
Co2 Capture ◽  
Electricity Market ◽  
Power Plants ◽  
Fossil Fuel ◽  
Operating Costs ◽  
Costs And Benefits ◽  
Fuel Prices ◽  
Economic Analyses ◽  
Co2 Capture Systems

Coal consumption for electricity generation produces over 30% of U.S. carbon dioxide (CO2) emissions, but coal is also an available, secure, and low cost fuel that is currently utilized to meet roughly half of America’s electricity demand. While the world transitions from the existing fossil fuel-based energy infrastructure to a sustainable energy system, carbon dioxide capture and sequestration (CCS) will be a critical technology that will allow continued use of coal in an environmentally acceptable manner. Techno-economic analyses are useful in understanding the costs and benefits of CCS. However, typical techno-economic analyses of post-combustion CO2 capture systems assume continuous operation at a high CO2 removal, which could use 30% of pre-capture electricity output and require new capacity installation to replace the output lost to CO2 capture energy requirements. This study, however, considers the inherent flexibility in post-combustion CO2 capture systems by modeling power plants that vary CO2 capture energy requirements in order to increase electricity output when economical under electricity market conditions. A first-order model of electricity dispatch and a competitive electricity market is used to investigate flexible CO2 capture in response to hourly electricity demand variations. The Electric Reliability Council of Texas (ERCOT) electric grid is used as a case study to compare plant and grid performance, economics, and CO2 emissions in scenarios without CO2 capture to those with flexible or inflexible CO2 capture systems. Flexible CO2 capture systems can choose how much CO2 to capture based on the competition between CO2 and electricity prices and a desire to either minimize operating costs or maximize operating profits. Coal and natural gas prices have varying degrees of predictability and volatility, and the relative prices of these fuels have a major impact on power plant operating costs and the resulting plant dispatch sequence. Because the chosen operating point in a flexible CO2 capture system affects net power plant efficiency, fuel prices also influence which CO2 capture operating point may be the most economical and the resulting dispatch of power plants with CO2 capture. Several coal and natural gas price combinations are investigated to determine their impact on flexible CO2 capture operation and the resulting economic and environmental impacts at the power plant and electric grid levels. This study investigates the costs and benefits of flexible CO2 capture in a framework of a carbon-constrained future where the effects of major energy infrastructure changes on fuel prices are not entirely clear.

Performance Optimization of Advanced Power Plants Based on Fossil Fuel Decarbonization Technologies

2007 ◽  
Author(s):  
Marco Gambini ◽  
Michela Vellini
Keyword(s):  
Power Plant ◽  
Natural Gas ◽  
Partial Oxidation ◽  
Performance Optimization ◽  
Power Plants ◽  
Fossil Fuel ◽  
H2 Production ◽  
Combined Cycle ◽  
Electricity Production ◽  
Percentage Points

In this paper two options for H2 production, by means of fossil fuels, are presented and their performances are evaluated when they are integrated with advanced H2/air cycles. In this investigation two different schemes have been analyzed: an advanced combined cycle power plant (CC) and a new advanced mixed cycle power plant (AMC). The two methods for producing H2 are as follows: • partial oxidation of methane; • gasification of coal. These hydrogen production plants require material and energetic integrations with the power section and the best interconnections must be investigated in order to obtain good overall performance. With reference to thermodynamic and economic performance, significant comparisons have been made between the above mentioned reference plants. An efficiency decrease and an increase in the cost of electricity have been obtained when power plants are equipped with a fossil fuel decarbonization section. The main results of the performed investigation are quite variable among the different H2 production technologies here considered: the efficiency decreases in a range of 5.5 percentage points to nearly 10 for the partial oxidation of the natural gas and in a range of 6.2–6.4 percentage points for the coal gasification. The electricity production cost increases in a range of about 33–37% for the first option and in a range of about 24–32% for the second one. The clean use of coal seems to have very good potentiality because, in comparison with natural gas decarbonisation, it allows lower energy penalizations (about 6 percentage points) and lower economic increases (about 24% for the CC).

Opportunities for CO2 Capture and Storage in Iranian Electricity Generation

2010 ◽  
Author(s):  
Farshid Zabihian ◽  
Alan S. Fung
Keyword(s):  
Natural Gas ◽  
Co2 Capture ◽  
Co2 Emission ◽  
Electricity Generation ◽  
Power Plants ◽  
Fossil Fuel ◽  
Combined Cycle ◽  
Pure Oxygen ◽  
Co2 Capture And Storage ◽  
And Storage

CO2 capture and storage (CCS) systems are technologies that can be used to reduce CO2 emissions by different industries where combustion is part of the process. A major problem of CCS system utilization in electricity generation industry is their high efficiency penalty in power plants. For different types of power plants fueled by oil, natural gas and coal, there are three main techniques that can be applied: • CO2 capture after combustion (post-combustion); • CO2 capture after concentration of flue gas by using pure oxygen in boilers and furnaces (oxy-fuel power plant); • CO2 capture before combustion (pre-combustion). More than 90% of electricity generation in Iran is based on fossil fuel power plants. Worldwide, electricity generation is responsible for 54% of GHG emissions. Thus, it is vital to reduce CO2 emission in fossil fuel-fired power plants. In this paper, it is shown that, by applying CO2 capture systems in power generation industry, very low CO2 emission intensity is possible but the energy and economic penalties are substantial. The analyses showed that for different technologies efficiency penalty could be as high as 25% and cost of electricity might increase by more than 65%. Two scenarios for Iranian electricity generation sector were investigated in this paper: installing CCS in the existing power plants with current technologies and replacing existing power plants by natural gas combined cycle plants equipped with CO2 capture system. The results revealed that the GHG intensity can be reduced from 610 to 79 gCO2eq/kWh in the first scenario and to 54 gCO2eq/kWh in the second scenario.

An Improved Methodology to Design Large-Scale Photovoltaic Power Plant

2017 ◽  
Vol 140 (1) ◽  
Author(s):  
Ali Durusu ◽  
Ali Erduman
Keyword(s):  
Power Plant ◽  
Case Studies ◽  
Social Life ◽  
Energy Demand ◽  
Power Plants ◽  
Large Scale ◽  
Electrical Energy ◽  
Optimal Number ◽  
Electricity Production ◽  
Pv Modules

A secure and reliable supply of energy is important for economic stability and even in social life. Increasing human population, industrialization, and rising living standards lead to increased electrical energy demand. Uncertainties in oil prices, shortage of fossil fuel reserves, and environmental pollution from conventional fuels leads solar energy as an alternative resource for electricity production. The share of installed photovoltaic (PV) capacity as a percent of total installed power generating capacity is increasing every year. In this study, an improved methodology to design large-scale PV power plant is proposed. The proposed methodology is performed for designing optimal configurations of PV power plants. The design methodology is performed using commercially available PV modules and inverters. In addition, solar radiation, ambient temperature, wind speed, shadow effect, and location and shape of plant field are taken into consideration as input parameters. The alternatives and parameters are evaluated with the purpose of minimizing the levelized cost of generated electricity (LCOE). The methodology includes the use of a genetic algorithm (GA) for determining the optimal number of PV modules and inverters, optimum tilt angle of PV modules, required installation area for the plant and optimum cable cross section and lengths. In the paper, the methodology is implemented, and case studies and results using pvsyst software for the same case studies are compared with each other.

scholarly journals CO2 Capture and Storage from Fossil Fuel Power Plants

2014 ◽  
Vol 63 ◽  
pp. 18-26 ◽  
Author(s):  
Dumitru Cebrucean ◽  
Viorica Cebrucean ◽  
Ioana Ionel
Keyword(s):  
Co2 Capture ◽  
Power Plants ◽  
Fossil Fuel ◽  
Co2 Capture And Storage ◽  
And Storage ◽  
Fossil Fuel Power Plants

scholarly journals Research and development of CO2 Capture and Storage Technologies in Fossil Fuel Power Plants

10.14311/1566 ◽  
2012 ◽  
Vol 52 (3) ◽  
Author(s):  
Lukáš Pilař ◽  
Jan Hrdlička
Keyword(s):  
Power Plants ◽  
Fossil Fuel ◽  
Electricity Production ◽  
The Czech Republic ◽  
Advantages And Disadvantages ◽  
Percentage Points ◽  
Lignite Coal ◽  
Storage Technologies ◽  
And Storage ◽  
Fossil Fuel Power Plants

This paper presents the results of a research project on the suitability of post-combustion CCS technology in the Czech Republic. It describes the ammonia CO2 separation method and its advantages and disadvantages. The paper evaluates its impact on the recent technology of a 250 MWe lignite coal fired power plant. The main result is a decrease in electric efficiency by 11 percentage points, a decrease in net electricity production by 62 MWe, and an increase in the amount of waste water. In addition, more consumables are needed.

Sign in / Sign up

Export Citation Format

Share Document