Determinants of Cleaner Technology Investments in the U.S. Bleached Kraft Pulp Industry

2001 ◽  
Vol 77 (4) ◽  
pp. 561-576 ◽  
Author(s):  
Leigh J. Maynard ◽  
James S. Shortle
Keyword(s):  
Kraft Pulp ◽  
Pulp Industry ◽  
Bleached Kraft Pulp ◽  
Technology Investments ◽  
Cleaner Technology ◽  
The U.S

scholarly journals Canadian Pulp and Paper in World Trade

1978 ◽  
Vol 54 (3) ◽  
pp. 147-151
Author(s):  
D. B. Cooke
Keyword(s):  
Kraft Pulp ◽  
Paper Industry ◽  
Pulp And Paper ◽  
Forest Resource ◽  
Pulp Industry ◽  
Bleached Kraft Pulp ◽  
Self Sufficiency ◽  
Excellent Growth ◽  
World Demand ◽  
Pulp Fibres

Canada still commands a major position in two key world pulp and paper products which come from our softwood forest resource — newsprint and woodpulp. In 1977 Canada produced 40% of the newsprint and 30% of the softwood bleached kraft used in the free world. Fine papers, linerboard and tissue grades of paper are made chiefly for the domestic market and are all tariff protected.After 30 years of excellent growth, the future prospects for the Canadian pulp and paper industry are clouded by: slower world demand for paper and board, increased self-sufficiency for newsprint and pulp in many of Canada's key markets, continuing trends to substitution of cheaper pulp fibres for the more expensive softwood bleached kraft pulp, the cornerstone of Canada's pulp industry.

Desorption of Cationic Polyacrylamide from Bleached Kraft Pulp Fibers

1987 ◽  
Vol 19 (5-6) ◽  
pp. 939-951 ◽  
Author(s):  
Clifton F. Warren ◽  
R. Gehr
Keyword(s):  
Adsorption Isotherm ◽  
Total Nitrogen ◽  
Kraft Pulp ◽  
Detection System ◽  
Cationic Polyelectrolyte ◽  
Chemiluminescence Detection ◽  
Pulp Fibers ◽  
Paper Manufacturing ◽  
Bleached Kraft Pulp ◽  
Receiving Water

The adsorption and desorption behaviour of a cationic polyelectrolyte contacted with wood pulp fibers was determined by total nitrogen analysis using a pyrolysis/chemiluminescence detection system. Dialysed polymer generated an adsorption isotherm of higher affinity than did non-dialysed polymer. Capacity adsorption was maximized at pH 7, but decreased in the presence of alum depending on the dosage. Desorption of non-dialysed polymer was caused by changes in pH above or below 7.0 as well as by addition of alum. However for the alum doses typically encountered in paper manufacturing, significant desorption is unlikely. Nevertheless, the contaminants in non-dialysed polymers do hinder adsorption, and effluents from those processes using both alum and polymer may contain quantities of unadsorbed or desorbed polyelectrolytes which could be damaging to receiving water bodies.

Characterization of odorous compounds from bleached kraft pulp mill effluent

1995 ◽  
Vol 31 (11) ◽  
pp. 35-40 ◽  
Author(s):  
B. G. Brownlee ◽  
S. L. Kenefick ◽  
G. A. MacInnis ◽  
S. E. Hrudey
Keyword(s):  
Gas Chromatography ◽  
Kraft Pulp ◽  
Pulp Mill ◽  
Dimethyl Disulfide ◽  
Gas Chromatography Mass Spectrometry ◽  
Pulp Mill Effluent ◽  
Kraft Pulp Mill ◽  
Bleached Kraft Pulp ◽  
Methyl Phenyl Sulfide ◽  
Library Spectrum

Odour compounds in extracts of bleached kraft pulp mill effluent (BKME) have been characterized by olfactory gas chromatography (OGC) and gas chromatography-mass spectrometry. A variety of sulfury odours was detected by OGC in addition to woody and pulp mill-like odours. Three sulfur compounds were identified by comparison of retention times and partial mass spectra with authentic standards: dimethyl disulfide, 3-methylthiophene and thioanisole (methyl phenyl sulfide). Typical concentrations in BKME were 1, 0.05, and 0.5 μg/l, respectively. Their odour intensity is relatively low and they were not detected by OGC. Dimethyl trisulfide was tentatively identified by comparison of its partial mass spectrum with a literature (library) spectrum. Its concentration in BKME was estimated at 0.5-2 μg/l. It corresponded to a skunky odour in the OGC profiles. Efforts to identify another odour peak, eluting just after 3-methylthiophene, with a pronounced alkyl sulfide odour were unsuccessful.

Growth responses of periphyton and chironomids exposed to biologically treated bleached kraft pulp mill effluent

1997 ◽  
Vol 35 (2-3) ◽  
pp. 339-345 ◽  
Author(s):  
M. G. Dubé ◽  
J. M. Culp
Keyword(s):  
Kraft Pulp ◽  
Pulp Mill ◽  
Pulp Mill Effluent ◽  
Growth Responses ◽  
High Concentration ◽  
Wood Extractives ◽  
Kraft Pulp Mill ◽  
Bleached Kraft Pulp ◽  
Low Levels ◽  
High Concentrations

Experiments were conducted in artificial streams to determine the effects of increasing concentrations of biologically treated bleached kraft pulp mill effluent (BKPME) on periphyton and chironomid growth in the Thompson River, British Columbia. Periphyton growth, as determined by increases in chlorophyll a, was significantly stimulated at all effluent concentrations tested (0.25%, 0.5%, 1.0%, 5.0% and, 10.0%). Chironomid growth (individual weight) was also significantly stimulated at low effluent concentrations (≤1.0%). At higher concentrations (5.0% and 10.0%), chironomid growth was inhibited relative to the 1.0% treatment streams. Increases in growth were attributed to the effects of nutrient and organic enrichment from BKPME. The effluent contained high concentrations of phosphorus and appears to be an important source of carbon for benthic insects grazing on the biofilm. In high concentration effluent streams, chironomid growth decreased despite low levels of typical pulp mill contaminants. This suggests that other compounds in the effluent, such as wood extractives, may be inhibiting chironomid growth. These results support findings of field monitoring studies conducted in the Thompson River where changes in periphyton and chironomid abundance occurred downstream of the bleached kraft pulp mill.

Evaluation of the Sub-lethal Toxicity of Bleached Kraft Pulp Mill Effluent to Carassius auratus and Dicentrarchus labrax

2010 ◽  
Vol 217 (1-4) ◽  
pp. 35-45 ◽  
Author(s):  
Mário S. Diniz ◽  
Ruth Pereira ◽  
Ana C. Freitas ◽  
Teresa A. P. Rocha-Santos ◽  
Luisa Castro ◽  
...  
Keyword(s):  
Carassius Auratus ◽  
Kraft Pulp ◽  
Dicentrarchus Labrax ◽  
Pulp Mill ◽  
Pulp Mill Effluent ◽  
Kraft Pulp Mill ◽  
Bleached Kraft Pulp ◽  
Lethal Toxicity

Action Mechanism of the Improvement of Printability for Eucalypt Bleached Kraft Pulp Pretreated by Cellulase

2013 ◽  
Vol 779-780 ◽  
pp. 294-301
Author(s):  
Wan You Tang ◽  
Li Chen ◽  
Zheng Jian Zhang
Keyword(s):  
Tensile Strength ◽  
Fiber Length ◽  
Kraft Pulp ◽  
Pulp Fiber ◽  
Fiber Morphology ◽  
Strength Index ◽  
Bleached Kraft Pulp ◽  
Tear Index ◽  
Pulp Sample ◽  
The Mean

Enzymatic refining of eucalypt bleached kraft pulp with the cellulase NOV476 was studied. The effects of this cellulase on the physical properties of pulp, fiber morphology and fiber appearance of the eucalypt bleached kraft pulp in different application conditions were discussed. The results show that, with the increase in the amount of enzyme, tensile strength index, burst index and TEA index of paper are increased and then decreased; elongation and tear index of paper have been declining, Zeeil tensile strength index has been an upward trend. Without beating the pulp sample, gradually increases as the amount of enzyme, the average fiber length and the average fiber width are gradually reduced, while mean kink index substantially constant. Number of vessels in fiber overall reduced tendency reaches a minimum in the amount of enzyme 0.5μ/g, the phenomenon is most obvious. In the same conditions of beating time, gradually increases as the amount of enzyme, the average fiber length is gradually reduced, an average fiber width is gradually increased, the mean kink index reaches a maximum in the amount of enzyme is 0.5μ/g. Number of vessels in fiber overall reduced trend.

Sign in / Sign up

Export Citation Format

Share Document