scholarly journals EBSD Observation of Pure Iron with Near-Cube Orientation Fabricated by Cold Rolling and Annealing

2017 ◽  
Vol 58 (5) ◽  
pp. 838-841
Author(s):  
Daisuke Okai ◽  
Masatoshi Yae ◽  
Atsushi Yamamoto ◽  
Toshiya Doi
Keyword(s):  
Cold Rolling ◽  
Pure Iron ◽  
Cube Orientation ◽  
Cold Rolling And Annealing

Characteristics of Cube Orientation for Pure Iron Tape Fabricated by Cold Rolling and Annealing

2021 ◽  
Vol 1016 ◽  
pp. 1830-1834
Author(s):  
Daisuke Okai ◽  
Atsushi Yamamoto ◽  
Toshiya Doi ◽  
Hiroki Adachi
Keyword(s):  
Grain Size ◽  
Cold Rolling ◽  
Pure Iron ◽  
Ebsd Analysis ◽  
Angular Deviation ◽  
Cube Orientation ◽  
Coarse Grains ◽  
Back Scattering ◽  
Areal Fraction ◽  
Cold Rolling And Annealing

A pure iron tape with cube orientation was fabricated by cold rolling and annealing. The orientation characteristics of the pure iron tape were evaluated using electron back-scattering diffraction (EBSD) analysis. The secondary recrystallized grains with cube orientation was formed on the tape surface for the pure iron tape. The coarse grains with a grain size of ca. 1mm were observed on the tape surface. The areal fraction of cube orientations with an angular deviation ≤ 20 ̊ amounts to ca. 81%.

Transformation Texture of Pure Iron after Cold-Rolling and Annealing

PRICM ◽  
2013 ◽  
pp. 2701-2707
Author(s):  
Daisuke Okai ◽  
Toshiya Doi ◽  
Atsushi Yamamoto
Keyword(s):  
Cold Rolling ◽  
Pure Iron ◽  
Transformation Texture ◽  
Cold Rolling And Annealing

scholarly journals Effect of Grain Boundaries on the Cold Rolling and Annealing Textures of Pure Iron

1982 ◽  
Vol 23 (11) ◽  
pp. 718-725 ◽  
Author(s):  
Mitsunobu Abe ◽  
Yasuji Kokabu ◽  
Yukio Hayashi ◽  
Satohiro Hayami
Keyword(s):  
Cold Rolling ◽  
Grain Boundaries ◽  
Pure Iron ◽  
Cold Rolling And Annealing

scholarly journals Evolution of the Shear Band in Cold-Rolling of Strip-Cast Fe-1.3% Si Non-Oriented Silicon Steel

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 775
Author(s):  
Yuanxiang Zhang ◽  
Yukun Xia ◽  
Hao Dun ◽  
Yang Wang ◽  
Feng Fang ◽  
...  
Keyword(s):  
Cold Rolling ◽  
Shear Bands ◽  
Cube Texture ◽  
Silicon Steel ◽  
Cube Orientation ◽  
Residual Part ◽  
The Matrix ◽  
Cold Rolling And Annealing ◽  
Strip Cast ◽  
Matrix Orientation

Cube texture and microstructural evolution of as-cast non-oriented silicon steel (1.3% Si) during cold rolling and annealing were studied. The results showed that the as-cast microstructure with grain size in the range of 100–500 μm had a weak texture. The strong orientation was mainly located at {100} and {110} planes. A significant content of shear-deformed grains oriented with {110}<110> were obtained by cold-rolling, and many regions oriented with Cube texture were distributed in the shear bands. During cold-rolling, the orientation of the shear-deformed microstructure tilted towards the {111}<112> orientation, while the matrix orientation retained {110}<110>. On further cold-rolling, the residual part of {110}<110> experienced shear deformation, forming more shear bands, strengthening the Cube orientation. During annealing, Cube orientation grains nucleated in the shear bands leading to strong Cube texture, and corresponding B50 was 1.83T/1.79T.

Sign in / Sign up

Export Citation Format

Share Document