Intelligent laser process control in the micro spot welding for copper

2001 ◽  
Author(s):  
Yosuke Kawahito ◽  
Toshiharu Okada
Keyword(s):  
Process Control ◽  
Spot Welding ◽  
Laser Process

scholarly journals In-Process Height Displacement Measurement Using Crossed Line Beams for Process Control of Laser Wire Deposition

2021 ◽  
Vol 15 (5) ◽  
pp. 715-727
Author(s):  
Shigeru Takushima ◽  
Nobuhiro Shinohara ◽  
Daiji Morita ◽  
Hiroyuki Kawano ◽  
Yasuhiro Mizutani ◽  
...  
Keyword(s):  
Process Control ◽  
Laser Processing ◽  
Displacement Measurement ◽  
Laser Spot ◽  
Control Technique ◽  
Section Method ◽  
Laser Process ◽  
Light Section ◽  
Measurement Direction ◽  
Continuous Deposition

We propose the use of the line section method with crossed line beams for the process control of laser wire deposition. This method could be used to measure the height displacement in front of a laser spot when the processing direction changes. In laser processing, especially laser deposition of metal additive manufacturing, the laser process control technique that controls the processing parameters based on the measured height displacement in front of a laser processing spot is indispensable for high-accuracy processing. However, it was impossible to measure the height displacement in front of a processing laser spot in a processing route in which the processing direction changes as the measurement direction of the conventional light-section method comprising the use of a straight-line beam is restricted although the configuration is simple. In this paper, we present an in-process height displacement measurement system of the light-section method using two crossed line beams. This method could be used to measure the height displacement in a ±90° direction by projecting two crossed line beams from the side of a laser processing head with a simple configuration comprising the addition of one line laser to the conventional light-section method. The height displacement can be calculated from the projected position shift of the line beams irrespective of the measurement direction by changing the longitudinal position on the crossed line beams according to the measurement direction. In addition, the configuration of our proposed system is compact because the imaging system is integrated into the processing head. We could measure the height displacement at 2.8–4 mm in front of a laser processing spot according to the measurement direction by reducing the influence of intense thermal radiation. Moreover, we experimentally evaluated the height displacement measurement accuracy for various measurement directions. Finally, we evaluated continuous deposition in an “L” shape wherein the deposition direction was changed while using a laser wire direct energy deposition machine for the laser process control based on the in-process height displacement measurement result. We achieved highly accurate continuous deposition at the position wherein the processing direction changes despite the acceleration and deceleration of the stage by laser process control.

Microstructure of resistance spot welding of maraging steels

1990 ◽  
Vol 48 (4) ◽  
pp. 900-901
Author(s):  
I. Neuman ◽  
S.F. Dirnfeld ◽  
I. Minkoff
Keyword(s):  
Maraging Steel ◽  
Spot Welding ◽  
Lath Martensite ◽  
Base Material ◽  
Aging Treatment ◽  
High Strength ◽  
Maraging Steels ◽  
Heat Treated ◽  
Current Cycle ◽  
Welding Processes

Experimental work on the spot welding of Maraging Steels revealed a surprisingly low level of strength - both in the as welded and in aged conditions. This appeared unusual since in the welding of these materials by other welding processes (TIG,MIG) the strength level is almost that of the base material. The maraging steel C250 investigated had the composition: 18wt%Ni, 8wt%Co, 5wt%Mo and additions of Al and Ti. It has a nominal tensile strength of 250 KSI. The heat treated structure of maraging steel is lath martensite the final high strength is reached by aging treatment at 485°C for 3-4 hours. During the aging process precipitation takes place of Ni3Mo and Ni3Ti and an ordered solid solution containing Co is formed.Three types of spot welding cycles were investigated: multi-pulse current cycle, bi-pulse cycle and single pulsle cycle. TIG welded samples were also tested for comparison.The microstructure investigations were carried out by SEM and EDS as well as by fractography. For multicycle spot welded maraging C250 (without aging), the dendrites start from the fusion line towards the nugget centre with an epitaxial growth region of various widths, as seen in Figure 1.

Sign in / Sign up

Export Citation Format

Share Document