scholarly journals Combination of photodynamic therapy and phototherapy for the treatment of cutaneous open wounds in dogs - case reports

2021 ◽  
Vol 91 (5) ◽  
pp. 559-564
Author(s):  
Alexandre B. A. Sampaio ◽  
◽  
Sheila C. Rahal ◽  
Marina P. Branco ◽  
Rebeca B. Abibe ◽  
...  

The evolution of cutaneous open wounds was evaluated in five client-owned dogs treated with photodynamic therapy (PDT), mediated by methylene blue and phototherapy with light-emitting diodes (LED) as the light source. On the first day of treatment, the wound was irrigated with sterile 0.9% sodium chloride solution, the surface was dried, and 3% solution of hydrogen peroxide soaked for 1 minute. The hydrogen peroxide was mechanically removed and, immediately after, 0.01% methylene blue was used in the wound for five minutes, after which a cluster of red LEDs (650 - 670 nm wavelength, 350 mW power, and irradiance of 200 mW/cm2) was used. Subsequently, single phototherapy sessions, every 48 hours or more, were applied until wound healing. In general, 24J was used for PDT and 12J for phototherapy. In all cases, the cutaneous open wounds treated with PDT associated with phototherapy healed without complications, and it may be considered as a treatment option, especially for extensive lesions.

2019 ◽  
Vol 2 (2) ◽  
pp. 14-22
Author(s):  
Vasyl Nahaichuk ◽  
Oleksandr Nazarchuk ◽  
Roman Chornopyshchuk ◽  
Pavlo Hormash ◽  
Yuliana Babina

Background. Burn injury, as one of the most common types of trauma, requires a comprehensive approach to treatment, including surgical and conservative treatment with effective post-burn wound protection. One of the main obstacles to wound healing is purulent-infectious complications, for prevention of which antiseptics are widely used. The aim is to study the microbiological, histological features of the wound healing course in the acute period of burn disease with the use of various antiseptics. Materials and methods. In the research there were involved 44 patients with burns (burn area 10–20 % of the body surface), treated in the Clinical Center for Thermal Injury and Plastic Surgery of Communal Non-Commercial Enterprise “Vinnytsia Regional Clinical Hospital named after M. I. Pirogov” (2018–2019). Depending on the antiseptic therapy, these patients were divided into three observation groups. Patients in the 1st study group (n = 15; mean age 48.07 ± 12.05 years) were treated with 2.0 % povidone-iodine during dressing. In the 2nd group (n = 15; mean age – 48.53 ± 14.76 years) antiseptic based on 0.02 % decamethoxin was used. In patients of the comparison group (n = 14; mean age – 47.71 ± 12.39 years) a solution of 10.0 % NaCl was administrated for topical wound management. Microbiological assessment of the condition of the wound surface (on 3, 7, 14, 21 days) and histological examination of tissue samples from the bottom of the wound (on 3, 7, 14 days) were carried out by means of standard methods. Results. Under the use of antiseptic agents based on 2.0 % povidone-iodine and 0.02 % decamethoxin during the treatment period in patients with burns up to 14 days, an effective reduction in the number of conditionally pathogenic microorganisms on the wound surface to lg (4.8 ± 0.4) and lg (3.06 ± 0.5) CFU/ml, respectively, was registered and it was significantly 1.5 times lower than that based on 10 % sodium chloride solution (p < 0.05). When applying decamethoxin for 14 days at the same time as the eradication of conditionally pathogenic microorganisms, moderate colonization of wounds was registered by representatives of normal skin microbiota (Corynebacterium spp., S. epidermidis). Histologically, there was found that with the use of 2.0 % povidone-iodine, the wound healing course was accompanied by a marked decrease in inflammation signs, as well as a pronounced inhibition of the formation of granulation tissue (10–14 days). The use of 0.02 % decamethoxin was accompanied by the formation of granulation tissue of sufficient maturity for atodermoplasty, in the presence of signs of inflammatory cellular reaction with the presence in the superficial parts of the bottom of the post-burn wounds of the fibrinoid layer, with signs of permanent formation of new hemocapillaries in it, surrounded by a thin argyrophilic mesh. When using a hypertonic sodium chloride solution before autodermoplasty, the granulation tissue had signs of uneven inflammatory cell infiltration. Signs of leukocyte-necrotic tissue changes, fibrinoid-leukocyte layers with fragments of tissue detritus, signs of resuscularization of granulation tissue were recorded. Conclusion. Microbiological data strongly suggest the efficacy of 0.02 % decamethoxin and 2.0 % povidone-iodine in reducing microbial wound colonization infection compared to 10.0 % NaCl. The use of antiseptics and hypertonic sodium chloride solution in the acute period of burn disease provides a marked reduction in histological signs of inflammation in the wound with a noticeable positive effect of decamethoxin and 10.0 % NaCl on the formation of granulations and their revascularization compared with povidone-iodine (p < 0.001).


2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Vahid Pourzarghan ◽  
Bahman Fazeli-Nasab

AbstractThe most important inhibitors used in bronze disease are BTA and AMT. While these inhibitors control corrosion, they are toxic and cancerous. In this study, the acacia fruit extract (200 ppm to 1800 ppm) was used to the prevention of corrosion inhibition of bronze alloy in corrosive sodium chloride solution 0.5 M, for 4 weeks consecutively. The Bronze alloy used in this research, was made based on the same percentage as the ancient alloys (Cu-10Sn). IE% was used to obtain the inhibitory efficiency percentage and Rp can be calculated from the resistance of polarization. SEM–EDX was used to evaluate the surfaces of alloy as well as inhibitory. The experiment was conducted in split plot design in time based on the RCD in four replications. ANOVA was performed and comparison of means square using Duncan's multiple range test at one percent probability level. The highest rate of corrosion inhibition (93.5%) was obtained at a concentration of 1800 ppm with an increase in the concentration of the extract, corrosion inhibition also increased, i.e., more bronze was prevented from burning. Also, the highest corrosion inhibitory activity of Acacia extract (79.66) was in the second week and with increasing duration, this effect has decreased. EDX analysis of the control sample matrix showed that the amount of chlorine was 8.47%wt, while in the presence of corrosive sodium chloride solution, after 4 weeks, the amount of chlorine detected was 3.20%wt. According to the morphology (needle and rhombus) of these corrosion products based on the SEM images, it can be said, they are the type of atacamite and paratacamite. They have caused bronze disease in historical bronze works. The green inhibitor of Acacia fruit aqueous extract can play an effective role in inhibiting corrosion of bronze, but at higher concentrations, it became fungal, which can reduce the role of Acacia fruit aqueous extract and even ineffective. To get better performance of green inhibitors, more tests need to be done to improve and optimize.


Sign in / Sign up

Export Citation Format

Share Document