scholarly journals Visual Monitoring as a Tool in Industrial Security Engineering. Case Study

2021 ◽  
Vol 4 (1) ◽  
pp. 107-119
Author(s):  
Jolanta Ignac-Nowicka
Keyword(s):  
Monitoring System ◽  
Video Surveillance ◽  
Control Function ◽  
Thermal Power ◽  
Video Monitoring ◽  
Visual Monitoring ◽  
Visual Monitoring System ◽  
Set Up ◽  
Production Company

Abstract The article presents the use of video monitoring in a production company on the example of municipal thermal power plant. After analyzing the hazards and work inconvenience occurring in the analyzed enterprise, video surveillance zones have been designated with the division into the indoor and outdoor monitoring system. Video surveillance is provided for production, auxiliary and delivery processes. Moreover, video monitoring performs a control function over the occupation health in workstations at risk of explosion or fire. In addition, observation points have been set up in the visual monitoring system, among which the internal ones are served by the dispatcher responsible for the production process, while the external are operated by security guards of the facility.

Development of a Visual Monitoring System for Deformation Measuring of Welded Members and its Application

2008 ◽  
Vol 580-582 ◽  
pp. 557-560 ◽  
Author(s):  
J.G. Han ◽  
Kyong Ho Chang ◽  
Gab Chul Jang ◽  
K.K. Hong ◽  
Sam Deok Cho ◽  
...  
Keyword(s):  
Monitoring System ◽  
Three Dimensional ◽  
Measuring Method ◽  
Welding Residual Stress ◽  
Measuring System ◽  
Visual Monitoring ◽  
Test Error ◽  
Steel Members ◽  
Loading Tests ◽  
Visual Monitoring System

Recently, in the loading tests for steel members, the deformation value is measured by calculating a distance of both cross-heads. This measuring method encounters a test error due to various environmental factors, such as initial slip, etc.. Especially, in the case of welded members, the non-uniform deformation behavior in welded joints is observed because of the effect of welding residual stress and weld metal. This is mainly responsible for a test error and a loss of the reliability for used test instruments. Therefore, to improve the accuracy and the applicability of measuring system, it is necessary to employ a visual monitoring system which can accurately measure the local and overall deformation of welded members. In this paper, to accurately measure a deformation of welded members, a visual monitoring system (VMS) was developed by using three-dimensional digital photogrammetry. The VMS was applied to the loading tests of a welded member. The accuracy and the applicability of VMS was verified by comparing to the deformation value measured by a test instrument (MTS-810). The characteristics of the behavior near a welded joint were investigated by using VMS.

scholarly journals Design optimization method of line-of-sight with JACK for bulldozer operator

2018 ◽  
Vol 176 ◽  
pp. 01003
Author(s):  
GUO Mei-ni
Keyword(s):  
Virtual Environment ◽  
Monitoring System ◽  
Lower Risk ◽  
Optimization Method ◽  
Line Of Sight ◽  
Original Design ◽  
Visual Monitoring ◽  
Visual Areas ◽  
Visual Monitoring System ◽  
Coverage Zone

The objective of this article is to investigate the line-of-sight (LOS) and visual areas in order to provide a lower risk of accident and a best available view for the operator of industry machine. This paper presented a method of simulating an bulldozer operation in a virtual environment for the sake of analyzing LOS of the operator during conditions of load and unload respectively. Coverage zone tool in the JACK software was utilized to calculate the percentage of visible zones from the virtual operator’s position. At the same time, the modification of design with additional cameras was proposed based on the results of LOS analysis, which significantly improved compared with original design. The results of this study proved that the modifications (with visual monitoring system) could improve visibility of bulldozer operators to some extent according to the optimization method.

A Chemical Embedded Video Monitoring System Based on Real-Time Video Compression MPEG4 Encoding

2014 ◽  
Vol 513-517 ◽  
pp. 3663-3666
Author(s):  
Hai Bing Zhang ◽  
Ge Liu
Keyword(s):  
Monitoring System ◽  
Video Compression ◽  
Video Surveillance ◽  
Surveillance System ◽  
Video Monitoring ◽  
Advanced Technology ◽  
Video Surveillance System ◽  
Chemical Application ◽  
Digital Monitoring ◽  
Coding Standards

Among the digital monitoring system, MPEG4 encoding compression technology and embedded technologies are widely used, chemical embedded MPEG4 video surveillance system has a broad market prospect and highly advanced technology. In this paper, the MPEG coding standards and on the basis of analysis of the characteristics, given a set of MPEG4 video surveillance system design, and implementation are integrated MPEG4 exposition, after the actual chemical application shows that the system performance stable, real good, do not need to assign someone to manage, scalability is also very good.

A Design and Implementation of Video Monitoring System at Smart Home

2014 ◽  
Vol 568-570 ◽  
pp. 1162-1167 ◽  
Author(s):  
Heng Xu ◽  
Cheng Hua Fu ◽  
Yun Jin Yang
Keyword(s):  
Real Time ◽  
Monitoring System ◽  
Video Surveillance ◽  
Surveillance System ◽  
Smart Home ◽  
Video Stream ◽  
Video Monitoring ◽  
Video Surveillance System ◽  
Infrared Sensor ◽  
Design And Implementation

The traditional real-time video surveillance system at smart home tends to occupy a lot of resource .In order to solve this kind of problem, a design of an infrared sensor to trigger video monitoring system is proposed in this paper .The system uses arm9-Linux as the platform ,and infrared sensor as the trigger device and uses the mpeg-4 algorithm to encode the video stream finally .The article mainly introduces how to build the hardware and software platform and tests the feasibility of the system.

Sign in / Sign up

Export Citation Format

Share Document