Constructing a genetic linkage map and mapping quantitative trait loci for skeletal traits in Japanese flounder

Biologia ◽  
2013 ◽  
Vol 68 (6) ◽  
Author(s):  
Yi Liu ◽  
Yongxin Liu ◽  
Yingjie Liu ◽  
Xiaoyan Zhang ◽  
Fei Si ◽  
...  
Keyword(s):  
Linkage Map ◽  
Quantitative Trait ◽  
Genetic Linkage ◽  
Genetic Linkage Map ◽  
Expressed Sequence Tag ◽  
Average Distance ◽  
Doubled Haploids ◽  
Japanese Flounder ◽  
Type Ii ◽  
Linkage Groups

AbstractA genetic linkage map of Japanese flounder was constructed using 165 doubled haploids (DHs) derived from a single female. A total of 574 genomic microsatellites (type II SSRs) and expressed sequence tag (EST)-derived markers (EST-SSRs) were mapped to 24 linkage groups. The length of linkage map was estimated as 1270.9 centiMorgans (cM), with an average distance between markers of 2.2 cM. The EST-SSRs were used together with type II SSR markers to construct the Japanese flounder genetic linkage map which will facilitate identify quantitative trait locus (QTL) controlling important economic traits in Japanese flounder. Thus, twelve skeletal traits at 2 years of age were measured for all DHs. Forty-one QTLs were detected on 14 linkage groups and totally account for a small proportion of phenotypic variation (4.5 to 17.3%). Most of QTLs detected distribute on linkage groups 5 (9 QTLs), 8 (9 QTLs), 9 (5 QTLs) and 20 (4 QTLs), in which, some QTLs perform the pleiotropy.

A genetic linkage map for Stevia rebaudiana

Genome ◽  
1999 ◽  
Vol 42 (4) ◽  
pp. 657-661 ◽  
Author(s):  
Y Yao ◽  
M Ban ◽  
J Brandle
Keyword(s):  
Linkage Map ◽  
Genetic Linkage ◽  
Rapd Markers ◽  
Genetic Linkage Map ◽  
Average Distance ◽  
Stevia Rebaudiana ◽  
Linkage Groups ◽  
Genome Map ◽  
High Level ◽  
Map Distance

To lay a foundation for molecular breeding efforts, the first genetic linkage map for Stevia rebaudiana has been constructed using segregation data from a pseudo test-cross F1 population. A total of 183 randomly amplified polymorphic DNA (RAPD) markers were analysed and assembled into 21 linkage groups covering a total distance of 1389 cM, with an average distance between markers of of 7.6 cM. The 11 largest linkage groups consisted of 4-19 loci, ranged in length from 56 to 174 cM, and accounted for 75% of the total map distance. Fifteen RAPD loci were found to be unlinked. From the 521 primers showing amplification products, 185 (35.5%) produced a total of 293 polymorphic fragments, indicating a high level of genetic diversity in stevia. Most of the RAPD markers in stevia segregated in normal Mendelian fashion.Key words: stevia, open-pollinated, genome map, RAPD.

Mapping of quantitative trait loci underlying resistance to cassava anthracnose disease

2015 ◽  
Vol 154 (7) ◽  
pp. 1209-1217 ◽  
Author(s):  
A. BOONCHANAWIWAT ◽  
S. SRAPHET ◽  
S. WHANKAEW ◽  
O. BOONSENG ◽  
D. R. SMITH ◽  
...  
Keyword(s):  
Quantitative Trait Loci ◽  
Linkage Map ◽  
Dna Markers ◽  
Quantitative Trait ◽  
Genetic Linkage ◽  
Genetic Linkage Map ◽  
Gene Annotation ◽  
Linkage Groups ◽  
Anthracnose Disease ◽  
Trait Loci

SUMMARYCassava (Manihot esculenta Crantz) is an economically important root crop in Thailand, which is ranked the world's top cassava exporting country. Production of cassava can be hampered by several pathogens and pests. Cassava anthracnose disease (CAD) is an important disease caused by the fungus Colletotrichum gloeosporioides f. sp. manihotis. The pathogen causes severe stem damage resulting in yield reductions and lack of stem cuttings available for planting. Molecular studies of cassava response to CAD will provide useful information for cassava breeders to develop new varieties with resistance to the disease. The current study aimed to identify quantitative trait loci (QTL) and DNA markers associated with resistance to CAD. A total of 200 lines of two F1 mapping populations were generated by reciprocal crosses between the varieties Huabong60 and Hanatee. The F1 samples were genotyped based on simple sequence repeat (SSR) and expressed sequence tag-SSR markers and a genetic linkage map was constructed using the JoinMap®/version3·0 program. The results showed that the map consisted of 512 marker loci distributed on 24 linkage groups with a map length of 1771·9 centimorgan (cM) and a mean interval between markers of 5·7 cM. The genetic linkage map was integrated with phenotypic data for the response to CAD infection generated by a detached leaf assay test. A total of three QTL underlying the trait were identified on three linkage groups using the MapQTL®/version4·0 program. Those DNA markers linked to the QTL that showed high statistically significant values with the CAD resistance trait were identified for gene annotation analysis and 23 candidate resistance genes to CAD infection were identified.

A genetic linkage map of tetraploid orchardgrass (Dactylis glomerata L.) and quantitative trait loci for heading date

Genome ◽  
2012 ◽  
Vol 55 (5) ◽  
pp. 360-369 ◽  
Author(s):  
Wengang Xie ◽  
Joseph G. Robins ◽  
B. Shaun Bushman
Keyword(s):  
Quantitative Trait Loci ◽  
Linkage Map ◽  
Quantitative Trait ◽  
Genetic Linkage ◽  
Genetic Linkage Map ◽  
Heading Date ◽  
Dactylis Glomerata ◽  
Linkage Groups ◽  
Trait Loci ◽  
Dactylis Glomerata L

Orchardgrass ( Dactylis glomerata L.), or cocksfoot, is indigenous to Eurasia and northern Africa, but has been naturalized on nearly every continent and is one of the top perennial forage grasses grown worldwide. To improve the understanding of genetic architecture of orchardgrass and provide a template for heading date candidate gene search in this species, the goals of the present study were to construct a tetraploid orchardgrass genetic linkage map and identify quantitative trait loci associated with heading date. A combination of SSR markers derived from an orchardgrass EST library and AFLP markers were used to genotype an F1 population of 284 individuals derived from a very late heading Dactylis glomerata subsp. himalayensis parent and an early to mid-heading Dactylis glomerata subsp. aschersoniana parent. Two parental maps were constructed with 28 cosegregation groups and seven consensus linkage groups each, and homologous linkage groups were tied together by 38 bridging markers. Linkage group lengths varied from 98 to 187 cM, with an average distance between markers of 5.5 cM. All but two mapped SSR markers had homologies to physically mapped rice (Oryza sativa L.) genes, and six of the seven orchardgrass linkage groups were assigned based on this putative synteny with rice. Quantitative trait loci were detected for heading date on linkage groups 2, 5, and 6 in both parental maps, explaining between 12% and 24% of the variation.

Linkage of random amplified polymorphic DNA, isozyme and morphological markers in grasspea (Lathyrus sativus)

1999 ◽  
Vol 133 (4) ◽  
pp. 389-395 ◽  
Author(s):  
M. A. CHOWDHURY ◽  
A. E. SLINKARD
Keyword(s):  
Linkage Map ◽  
Genetic Linkage ◽  
Rapd Markers ◽  
Genetic Linkage Map ◽  
Average Distance ◽  
Random Amplified Polymorphic Dna ◽  
Lathyrus Sativus ◽  
Morphological Markers ◽  
Linkage Studies ◽  
Linkage Groups

We constructed a genetic linkage map of grasspea (Lathyrus sativus L.; 2n = 14) from 100 F2 individuals derived from a cross between PI 426891.1.3 and PI 283564c.3.2. A total of 71 RAPD, three isozyme and one morphological markers segregated in the F2 progeny. A small fraction of markers (12%) deviated significantly from the expected Mendelian ratio (1[ratio ]2[ratio ]1 or 3[ratio ]1). Out of 75 markers, 69 (one morphological, three isozyme and 65 RAPD markers) were assigned to 14 linkage groups comprising 898 cM. The average distance between two adjacent markers was 17·2 cM. The present linkage map will serve as a reference point for further linkage studies in grasspea.

An SSR-based genetic linkage map of the model grass Brachypodium distachyon

Genome ◽  
2010 ◽  
Vol 53 (1) ◽  
pp. 1-13 ◽  
Author(s):  
David F. Garvin ◽  
Neil McKenzie ◽  
John P. Vogel ◽  
Todd C. Mockler ◽  
Zachary J. Blankenheim ◽  
...  
Keyword(s):  
Linkage Map ◽  
Genetic Linkage ◽  
Genetic Linkage Map ◽  
Expressed Sequence Tag ◽  
Brachypodium Distachyon ◽  
Molecular Genetic ◽  
Rice Genome ◽  
Artificial Chromosome ◽  
Grass Species ◽  
Linkage Groups

The grass species Brachypodium distachyon (hereafter, Brachypodium) has been adopted as a model system for grasses. Here, we describe the development of a genetic linkage map of Brachypodium. The genetic linkage map was developed with an F2 population from a cross between the diploid Brachypodium lines Bd3-1 and Bd21. The map was populated with polymorphic simple sequence repeat (SSR) markers from Brachypodium expressed sequence tag (EST) and bacterial artificial chromosome (BAC) end sequences and conserved orthologous sequence (COS) markers from other grass species. The map is 1386 cM in length and consists of 139 marker loci distributed across 20 linkage groups. Five of the linkage groups exceed 100 cM in length, with the largest being 231 cM long. Assessment of colinearity between the Brachypodium linkage map and the rice genome sequence revealed significant regions of macrosynteny between the two genomes, as well as rearrangements similar to those reported in other grass comparative structural genomics studies. The Brachypodium genetic linkage map described here will serve as a new tool to pursue a range of molecular genetic analyses and other applications in this new model plant system.

A Microsatellite-Based Genetic Linkage Map for Channel Catfish, Ictalurus punctatus

Genetics ◽  
2001 ◽  
Vol 158 (2) ◽  
pp. 727-734 ◽  
Author(s):  
Geoffrey C Waldbieser ◽  
Brian G Bosworth ◽  
Danny J Nonneman ◽  
William R Wolters
Keyword(s):  
Linkage Map ◽  
Ictalurus Punctatus ◽  
Channel Catfish ◽  
Microsatellite Loci ◽  
Genetic Linkage ◽  
Genetic Linkage Map ◽  
Type I ◽  
Type Ii ◽  
Linkage Groups ◽  
Multipoint Linkage

Abstract Microsatellite loci were identified in channel catfish gene sequences or random clones from a small insert genomic DNA library. Outbred populations of channel catfish contained an average of eight alleles per locus and an average heterozygosity of 0.70. A genetic linkage map of the channel catfish genome (N = 29) was constructed from two reference families. A total of 293 microsatellite loci were polymorphic in one or both families, with an average of 171 informative meioses per locus. Nineteen type I loci, 243 type II loci, and one EST were placed in 32 multipoint linkage groups covering 1958 cM. Nine more type II loci were contained in three two-point linkage groups covering 24.5 cM. Twenty-two type II loci remained unlinked. Multipoint linkage groups ranged in size from 11.9 to 110.5 cM with an average intermarker distance of 8.7 cM. Seven microsatellite loci were closely linked with the sex-determining locus. The microsatellite loci and genetic linkage map will increase the efficiency of selective breeding programs for channel catfish.

scholarly journals Genetic linkage map of the guppy, Poecilia reticulata , and quantitative trait loci analysis of male size and colour variation

2009 ◽  
Vol 276 (1665) ◽  
pp. 2195-2208 ◽  
Author(s):  
Namita Tripathi ◽  
Margarete Hoffmann ◽  
Eva-Maria Willing ◽  
Christa Lanz ◽  
Detlef Weigel ◽  
...  
Keyword(s):  
Quantitative Trait Loci ◽  
Linkage Map ◽  
Quantitative Trait ◽  
Genetic Linkage ◽  
Poecilia Reticulata ◽  
Genetic Linkage Map ◽  
Expressed Sequence Tag ◽  
Colour Pattern ◽  
Linkage Data ◽  
Trait Loci

We report construction of a genetic linkage map of the guppy genome using 790 single nucleotide polymorphism markers, integrated from six mapping crosses. The markers define 23 linkage groups (LGs), corresponding to the known haploid number of guppy chromosomes. The map, which spans a genetic length of 899 cM, includes 276 markers linked to expressed genes (expressed sequence tag), which have been used to derive broad syntenic relationships of guppy LGs with medaka chromosomes. This combined linkage map should facilitate the advancement of genetic studies for a wide variety of complex adaptive phenotypes relevant to natural and sexual selection in this species. We have used the linkage data to predict quantitative trait loci for a set of variable male traits including size and colour pattern. Contributing loci map to the sex LG for many of these traits.

A genetic linkage map in autotetraploid lucerne adapted to northern Australia, and use of the map to identify DNA markers linked to resistance to Phytophthora medicaginis

2005 ◽  
Vol 56 (4) ◽  
pp. 333 ◽  
Author(s):  
J. M. Musial ◽  
K. S. Aitken ◽  
J. M. Mackie ◽  
J. A. G. Irwin
Keyword(s):  
Linkage Map ◽  
Phenotypic Variation ◽  
Genetic Linkage ◽  
Genetic Linkage Map ◽  
Average Distance ◽  
Linkage Groups ◽  
Resistance Qtls ◽  
Backcross Population ◽  
Resistant Parent ◽  
Repulsion Phase

Phytophthora root rot, caused by Phytophthora medicaginis, is a major limitation to lucerne (Medicago sativa L.) production in Australia and North America. Quantitative trait loci (QTLs) involved in resistance to P. medicaginis were identified in a lucerne backcross population of 120 individuals. A genetic linkage map was constructed for tetraploid lucerne using 50 RAPD (randomly amplified polymorphic DNA), 104 AFLP (amplified fragment length polymorphism) markers, and one SSR (simple sequence repeat or microsatellite) marker, which originated from the resistant parent (W116); 13 markers remain unlinked. The linkage map contains 18 linkage groups covering 2136.5 cM, with an average distance of 15.0 cM between markers. Four of the linkage groups contained only either 2 or 3 markers. Using duplex markers and repulsion phase linkages the map condensed to 7 homology groups and 2 unassigned linkage groups. Three regions located on linkage groups 2, 14, and 18, were identified as associated with root reaction and the QTLs explained 6–15% of the phenotypic variation. The research also indicates that different resistance QTLs are involved in conferring resistance in different organs. Two QTLs were identified as associated with disease resistance expressed after inoculation of detached leaves. The marker, W11-2 on group 18, identified as associated with root reaction, contributed 7% of the phenotypic variation in leaf response in our population. This marker appears to be linked to a QTL encoding a resistance factor contributing to both root and leaf reaction. One other QTL, not identified as associated with root reaction, was positioned on group 1 and contributed to 6% of the variation. This genetic linkage map provides an entry point for future molecular-based improvement of lucerne in Australia, and markers linked to the QTLs we have reported should be useful for marker-assisted selection for partial resistance to P. medicaginis in lucerne.

The First Comprehensive Genetic Linkage Map of a Marsupial: The Tammar Wallaby (Macropus eugenii)

Genetics ◽  
2002 ◽  
Vol 162 (1) ◽  
pp. 321-330 ◽  
Author(s):  
Kyall R Zenger ◽  
Louise M McKenzie ◽  
Desmond W Cooper
Keyword(s):  
Linkage Map ◽  
Genetic Linkage ◽  
Genetic Linkage Map ◽  
Average Distance ◽  
Tammar Wallaby ◽  
Chromosome 1 ◽  
Linkage Groups ◽  
Recombination Rates ◽  
Macropus Eugenii ◽  
Significant Linkage

AbstractThe production of a marsupial genetic linkage map is perhaps one of the most important objectives in marsupial research. This study used a total of 353 informative meioses and 64 genetic markers to construct a framework genetic linkage map for the tammar wallaby (Macropus eugenii). Nearly all markers (93.8%) formed a significant linkage (LOD > 3.0) with at least one other marker, indicating that the majority of the genome had been mapped. In fact, when compared with chiasmata data, >70% (828 cM) of the genome has been covered. Nine linkage groups were identified, with all but one (LG7; X-linked) allocated to the autosomes. These groups ranged in size from 15.7 to 176.5 cM and have an average distance of 16.2 cM between adjacent markers. Of the autosomal linkage groups (LGs), LG2 and LG3 were assigned to chromosome 1 and LG4 localized to chromosome 3 on the basis of physical localization of genes. Significant sex-specific distortions toward reduced female recombination rates were revealed in 22% of comparisons. When comparing the X chromosome data to closely related species it is apparent that they are conserved in both synteny and gene order.

Sign in / Sign up

Export Citation Format

Share Document