scholarly journals A preliminary study on shear capacity of historical reinforced concrete beams

2017 ◽  
Vol 1 (4) ◽  
pp. 608-623
Author(s):  
F. Palmisano
Keyword(s):  
Reinforced Concrete ◽  
Concrete Beams ◽  
Shear Capacity ◽  
Reinforced Concrete Beams ◽  
Preliminary Study

scholarly journals Shear Capacity of Reinforced Concrete Beams under Monotonic and Cyclic Loads: Experiments and Computational Models

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4092
Author(s):  
Kamil Bacharz ◽  
Barbara Goszczyńska
Keyword(s):  
Reinforced Concrete ◽  
Laboratory Tests ◽  
Computational Models ◽  
Concrete Beams ◽  
Shear Capacity ◽  
Reinforced Concrete Beams ◽  
Image Correlation ◽  
Engineering Practice ◽  
Cyclic Loads ◽  
Loading Modes

The paper reports the results of a comparative analysis of the experimental shear capacity obtained from the tests of reinforced concrete beams with various static schemes, loading modes and programs, and the shear capacity calculated using selected models. Single-span and two-span reinforced concrete beams under monotonic and cyclic loads were considered in the analysis. The computational models were selected based on their application to engineering practice, i.e., the approaches implemented in the European and US provisions. Due to the changing strength characteristics of concrete, the analysis was also focused on concrete contribution in the shear capacity of reinforced concrete beams in the cracked phase and on the angle of inclination of diagonal struts. During the laboratory tests, a modern ARAMIS digital image correlation (DIC) system was used for tracking the formation and development of diagonal cracks.

scholarly journals Statistical and Reliability Study on Shear Strength of Recycled Coarse Aggregate Reinforced Concrete Beams

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3321
Author(s):  
Hyunjin Ju ◽  
Meirzhan Yerzhanov ◽  
Alina Serik ◽  
Deuckhang Lee ◽  
Jong R. Kim
Keyword(s):  
Reinforced Concrete ◽  
Concrete Beams ◽  
Construction Material ◽  
Safety Margin ◽  
Shear Capacity ◽  
Reinforced Concrete Beams ◽  
Construction And Demolition Waste ◽  
Demolition Waste ◽  
Rc Structures ◽  
Coarse Aggregates

The consumption of structural concrete in the construction industry is rapidly growing, and concrete will remain the main construction material for increasing urbanization all over the world in the near future. Meanwhile, construction and demolition waste from concrete structures is also leading to a significant environmental problem. Therefore, a proper sustainable solution is needed to address this environmental concern. One of the solutions can be using recycled coarse aggregates (RCA) in reinforced concrete (RC) structures. Extensive research has been conducted in this area in recent years. However, the usage of RCA concrete in the industry is still limited due to the absence of structural regulations appropriate to the RCA concrete. This study addresses a safety margin of RCA concrete beams in terms of shear capacity which is comparable to natural coarse aggregates (NCA) concrete beams. To this end, a database for reinforced concrete beams made of recycled coarse aggregates with and without shear reinforcement was established, collecting the shear specimens available from various works in the existing literature. The database was used to statistically identify the strength margin between RCA and NCA concrete beams and to calculate its safety margin based on reliability analysis. Moreover, a comparability study of RCA beams was conducted with its control specimens and with a database for conventional RC beams.

scholarly journals Strengthening of Reinforced Concrete Beams Subjected to Concentrated Loads

2022 ◽  
Author(s):  
Paolo Foraboschi
Keyword(s):  
Reinforced Concrete ◽  
Carrying Capacity ◽  
Concrete Beams ◽  
Shear Capacity ◽  
Reinforced Concrete Beams ◽  
Load Carrying Capacity ◽  
Reinforced Concrete Structure ◽  
Concentrated Loads ◽  
Concentrated Load ◽  
Load Carrying

Renovation, restoration, remodeling, refurbishment, and retrofitting of build-ings often imply modifying the behavior of the structural system. Modification sometimes includes applying forces (i.e., concentrated loads) to beams that before were subjected to distributed loads only. For a reinforced concrete structure, the new condition causes a beam to bear a concentrated load with the crack pattern that was produced by the distributed loads that acted in the past. If the concentrated load is applied at or near the beam’s midspan, the new shear demand reaches the maximum around the midspan. But around the midspan, the cracks are vertical or quasi-vertical, and no inclined bar is present. So, the actual shear capacity around the midspan not only is low, but also can be substantially lower than the new demand. In order to bring the beam capacity up to the demand, fiber-reinforced-polymer composites can be used. This paper presents a design method to increase the concentrated load-carrying capacity of reinforced concrete beams whose load distribution has to be changed from distributed to concentrated, and an analytical model to pre-dict the concentrated load-carrying capacity of a beam in the strengthened state.

Probabilistic studies on mechanics‐based shear capacity models for reinforced concrete beams with stirrups

2019 ◽  
Vol 21 (1) ◽  
pp. 376-392
Author(s):  
Yogalakshmi Nagavedu Jayakumar ◽  
Balaji Rao Kanchi
Keyword(s):  
Reinforced Concrete ◽  
Concrete Beams ◽  
Shear Capacity ◽  
Reinforced Concrete Beams
Sign in / Sign up

Export Citation Format

Share Document