scholarly journals Radiative heat transfer in a model gas turbine combustor

2006 ◽  
Author(s):  
M. C. Paul ◽  
W. P. Jones
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Radiative Heat Transfer ◽  
Radiative Heat ◽  
Gas Turbine Combustor ◽  
Model Gas Turbine Combustor

scholarly journals Radiative Heat Transfer From Gas Turbine Flames

1979 ◽  
Author(s):  
C. A. Ferguson ◽  
A. M. Mellor
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Gas Turbine ◽  
Radiative Heat ◽  
Normal Component ◽  
Particle Analysis ◽  
Soot Concentration ◽  
Gas Turbine Combustor ◽  
Turbulent Fluctuations ◽  
Model Gas Turbine Combustor

Measurements have been made of the normal component of the radiative heat flux to the wall of a model gas turbine combustor with and without a mirrored background. Measurements have also been made of the centerline soot concentration. The data show that the heat flux correlated with the soot concentration but not universally, since JET A fuel yielded a different curve 1han DIESEL fuel. A theoretical analysis of the heat flux from a soot suspension was formulated. A criterion was established for the use of a small particle analysis. Finally, it is shown that there is no correspondence between theory and these experiments. It is speculated that turbulent fluctuations need to be modeled.

Modeling of Turbulent Combustion and Radiative Heat Transfer in a Object-Oriented CFD Code for Gas Turbine Application

2008 ◽  
Author(s):  
Antonio Andreini ◽  
Matteo Cerutti ◽  
Bruno Facchini ◽  
Luca Mangani
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Radiative Heat Transfer ◽  
Turbulent Combustion ◽  
Radiative Heat ◽  
Object Oriented ◽  
Flame Stabilization ◽  
Operating Conditions ◽  
Pollutant Emissions ◽  
Combustion Models

One of the driving requirements in gas turbine design is the combustion analysis. The reduction of exhaust pollutant emissions is in fact the main design constraint of modern gas turbine engines, requiring a detailed investigation of flame stabilization criteria and temperature distribution within combustion chamber. At the same time, the prediction of thermal loads on liner walls continues to represent a critical issue especially with diffusion flame combustors which are still widely used in aeroengines. To meet such requirement, design techniques have to take advantage also of the most recent CFD tools that have to supply advanced combustion models according to the specific application demand. Even if LES approach represents a very accurate approach for the analysis of reactive flows, RANS computation still represents a fundamental tool in industrial gas turbine development, thanks to its optimal tradeoff between accuracy and computational costs. This paper describes the development and the validation of both combustion and radiation models in a object-oriented RANS CFD code: several turbulent combustion models were considered, all based on a generalized presumed PDF flamelet approach, valid for premixed and non premixed flames. Concerning radiative heat transfer calculations, two directional models based on the P1-Approximation and the Finite Volume Method were treated. Accuracy and reliability of developed models have been proved by performing several computations on well known literature test-cases. Selected cases investigate several turbulent flame types and regimes allowing to prove code affordability in a wide range of possible gas turbine operating conditions.

Sign in / Sign up

Export Citation Format

Share Document