Reduced-Order Models for Computational-Fluid-Dynamics-Based Nonlinear Aeroelastic Problems

AIAA Journal ◽  
2015 ◽  
Vol 53 (9) ◽  
pp. 2671-2685 ◽  
Author(s):  
A. Mannarino ◽  
E. H. Dowell
Author(s):  
LM Griffiths ◽  
AL Gaitonde ◽  
DP Jones ◽  
MI Friswell

Reduced order models of computational fluid dynamics codes have been developed to decrease computational costs; however, each reduced order model has a limited range of validity based on the data used in its construction. Further, like the computational fluid dynamics from which it is derived, such models exhibit differences from experimental data due to uncertainty in boundary conditions and numerical accuracy. Model updating provides the opportunity to use small amounts of additional data to modify the behaviour of a reduced order model, which means that the range of validity of the reduced order model can be extended. Whilst here computational fluid dynamics data have been used for updating, the approach offers the possibility that experimental data can be used in future. In this work, the baseline reduced order models are constructed using the Eigensystem realisation algorithm and the steps used to update these models are given in detail. The methods developed are then applied to remove the effects of wind tunnel walls and to include viscous effects.


Author(s):  
Enhao Wang ◽  
Qing Xiao ◽  
Narakorn Srinil ◽  
Hossein Zanganeh

Computational fluid dynamics (CFD) studies capturing vortex-induced vibration (VIV) phenomena in a wide range of both the hydrodynamics and the structural parameters are important, because the analysis outcomes can be applied to numerical prediction codes, complement experimental measurement results and suggest a modification of some practical design guidelines. Nevertheless, in spite of many published studies on VIV, CFD studies for two dimensional coupled cross-flow/in-line VIV even with two degrees of freedom (2-DoF), are still quite limited. More CFD studies which can control the equivalence of system fluid-structure parameters in different directions with reduced uncertainty are needed to improve the numerical model empirical coefficients and capability to effectively match numerical predictions and experimental outcomes. This paper presents a CFD study on the 2-DoF VIV of elastically mounted circular cylinder with a low mass ratio (m* = 2.55). The Reynolds number is fixed to be 150 and the reduced flow velocity parameter is varied by changing the cross-flow natural frequency. To model the problem, two-dimensional Navier-Stokes equations coupled with linear structural equations in the in-line and cross-flow directions are solved. Particular attention is paid to the determination of maximum attainable amplitudes and the associated instantaneous lift and drag forces and hydrodynamic coefficients. These results are compared with the obtained results from alternative numerical prediction outcomes using new reduced-order models with four nonlinearly coupled wake-structure oscillators (Srinil and Zanganeh, 2012). Some qualitative and quantitative aspects are discussed. Overall, the important VIV characteristics are captured including the dual-resonance and figure-of-eight trajectories. Through the flow visualization study, it is found that as the dual-resonance is excited, a P+S wake pattern appears.


Sign in / Sign up

Export Citation Format

Share Document