Experimental study of instability modes in a three-dimensional boundary layer

1987 ◽  
Author(s):  
H. BIPPES ◽  
P. NITSCHKE-KOWSKY
Keyword(s):  
Boundary Layer ◽  
Experimental Study ◽  
Three Dimensional ◽  
Instability Modes ◽  
Dimensional Boundary

Visualization of transition

1969 ◽  
Vol 38 (3) ◽  
pp. 473-480 ◽  
Author(s):  
F. X. Wortmann
Keyword(s):  
Boundary Layer ◽  
Experimental Study ◽  
Flow Visualization ◽  
Three Dimensional ◽  
Vortex Pair ◽  
Instability Mode ◽  
Vortex Pattern ◽  
Görtler Vortices ◽  
Instability Modes ◽  
Gortler Vortices

In an experimental study the development of transition downstream of Görtler vortices was investigated. With the tellurium method it was possible to distinguish beyond the Görtler vortices to successive instability modes. The first deforms the vortex pattern in a steady way and produces between each vortex pair boundary-layer profiles with two points of inflexion. When this has been established another instability mode starts, consisting of regular three-dimensional oscillations. By detailed flow visualization a nearly complete picture of the different flow patterns can be obtained.

An Assessment of Three-Dimensional Turbulent Boundary Layer Prediction Methods

1973 ◽  
Vol 95 (3) ◽  
pp. 415-421 ◽  
Author(s):  
A. J. Wheeler ◽  
J. P. Johnston
Keyword(s):  
Boundary Layer ◽  
Eddy Viscosity ◽  
Three Dimensional ◽  
High Sensitivity ◽  
Boundary Layer Flows ◽  
Mean Velocity ◽  
Eddy Viscosity Model ◽  
Separating Flow ◽  
Dimensional Boundary ◽  
Stress Models

Predictions have been made for a variety of experimental three-dimensional boundary layer flows with a single finite difference method which was used with three different turbulent stress models: (i) an eddy viscosity model, (ii) the “Nash” model, and (iii) the “Bradshaw” model. For many purposes, even the simplest stress model (eddy viscosity) was adequate to predict the mean velocity field. On the other hand, the profile of shear stress direction was not correctly predicted in one case by any model tested. The high sensitivity of the predicted results to free stream pressure gradient in separating flow cases is demonstrated.

Experimental and Theoretical Investigation of the Supersonic Boundary Layer Stability on the Swept Wing

2008 ◽  
Vol 3 (3) ◽  
pp. 34-38
Author(s):  
Sergey A. Gaponov ◽  
Yuri G. Yermolaev ◽  
Aleksandr D. Kosinov ◽  
Nikolay V. Semionov ◽  
Boris V. Smorodsky
Keyword(s):  
Boundary Layer ◽  
Three Dimensional ◽  
Leading Edge ◽  
Supersonic Boundary Layer ◽  
Mean Flow ◽  
Swept Wing ◽  
Wing Model ◽  
Dimensional Boundary ◽  
The Stability ◽  
Good Agreement

Theoretical and an experimental research results of the disturbances development in a swept wing boundary layer are presented at Mach number М = 2. In experiments development of natural and small amplitude controllable disturbances downstream was studied. Experiments were carried out on a swept wing model with a lenticular profile at a zero attack angle. The swept angle of a leading edge was 40°. Wave parameters of moving disturbances were determined. In frames of the linear theory and an approach of the local self-similar mean flow the stability of a compressible three-dimensional boundary layer is studied. Good agreement of the theory with experimental results for transversal scales of unstable vertices of the secondary flow was obtained. However the calculated amplification rates differ from measured values considerably. This disagreement is explained by the nonlinear processes observed in experiment

Sign in / Sign up

Export Citation Format

Share Document