Development of Marine Seismic Vibrator towards Realization of Shear Wave Source with No Touch-Down to Seafloor

Author(s):  
Hiroaki Ozasa ◽  
Fumio Sato ◽  
Eiichi Asakawa ◽  
Fumitoshi Murakami ◽  
Ehsan Jamali Hondori ◽  
...  
2016 ◽  
Author(s):  
Hiroaki Ozasa ◽  
Fumio Sato ◽  
Eiichi Asakawa ◽  
Fumitoshi Murakami ◽  
Ehsan Jamali Hondori ◽  
...  

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Guillaume Flé ◽  
Guillaume Gilbert ◽  
Pol Grasland-Mongrain ◽  
Guy Cloutier

AbstractQuantitative mechanical properties of biological tissues can be mapped using the shear wave elastography technique. This technology has demonstrated a great potential in various organs but shows a limit due to wave attenuation in biological tissues. An option to overcome the inherent loss in shear wave magnitude along the propagation pathway may be to stimulate tissues closer to regions of interest using alternative motion generation techniques. The present study investigated the feasibility of generating shear waves by applying a Lorentz force directly to tissue mimicking samples for magnetic resonance elastography applications. This was done by combining an electrical current with the strong magnetic field of a clinical MRI scanner. The Local Frequency Estimation method was used to assess the real value of the shear modulus of tested phantoms from Lorentz force induced motion. Finite elements modeling of reported experiments showed a consistent behavior but featured wavelengths larger than measured ones. Results suggest the feasibility of a magnetic resonance elastography technique based on the Lorentz force to produce an shear wave source.


2021 ◽  
Vol 9 ◽  
Author(s):  
Javier Brum ◽  
Nicolás Benech ◽  
Thomas Gallot ◽  
Carlos Negreira

Shear wave elastography (SWE) relies on the generation and tracking of coherent shear waves to image the tissue's shear elasticity. Recent technological developments have allowed SWE to be implemented in commercial ultrasound and magnetic resonance imaging systems, quickly becoming a new imaging modality in medicine and biology. However, coherent shear wave tracking sets a limitation to SWE because it either requires ultrafast frame rates (of up to 20 kHz), or alternatively, a phase-lock synchronization between shear wave-source and imaging device. Moreover, there are many applications where coherent shear wave tracking is not possible because scattered waves from tissue’s inhomogeneities, waves coming from muscular activity, heart beating or external vibrations interfere with the coherent shear wave. To overcome these limitations, several authors developed an alternative approach to extract the shear elasticity of tissues from a complex elastic wavefield. To control the wavefield, this approach relies on the analogy between time reversal and seismic noise cross-correlation. By cross-correlating the elastic field at different positions, which can be interpreted as a time reversal experiment performed in the computer, shear waves are virtually focused on any point of the imaging plane. Then, different independent methods can be used to image the shear elasticity, for example, tracking the coherent shear wave as it focuses, measuring the focus size or simply evaluating the amplitude at the focusing point. The main advantage of this approach is its compatibility with low imaging rates modalities, which has led to innovative developments and new challenges in the field of multi-modality elastography. The goal of this short review is to cover the major developments in wave-physics involving shear elasticity imaging using a complex elastic wavefield and its latest applications including slow imaging rate modalities and passive shear elasticity imaging based on physiological noise correlation.


Author(s):  
H. Ozasa ◽  
H. Mikada ◽  
F. Sato ◽  
F. Murakami ◽  
J. Takekawa ◽  
...  

2005 ◽  
Author(s):  
M.A. Ackers ◽  
V.T. Nagassar ◽  
D.J. Klauza ◽  
T. Hilton
Keyword(s):  

This paper is the first in a series of articles describing the refraction and propagation of infinitesimal disturbances in a 'coarse grained’ inhomogeneous anisotropic material which is fused to an isotropic substrate. Here, the basic constitutive law for the material is motivated by applications to the non-destructive evaluation of austenitic steel welds, although it is clear that the phenomena described and the mathematical analysis used is also of interest in geophysics, the study of composite materials and several other areas of continuum mechanics. This work is concerned with the refraction of a horizontally polarized shear wave source at the fusion interface between a homogeneous isotropic material and transversely isotropic material. The latter is inhomogeneous by virtue of the fact that the zonal axis or axis of symmetry of the crystals varies in direction with the distance from the interface. The mathematical boundary-value problem is solved exactly, and, in the highfrequency limit, a uniform asymptotic expansion for the displacement vector is found. It is shown that in this limit, and for a wide range of material constants, the refracted energy which penetrates certain regions of the ‘weld material’ is totally internally reflected. This conclusion is highly significant in the design of inspection procedures for structurally important welds.


Author(s):  
G.G. Drijkoningen ◽  
D. Dieulangard ◽  
E. Kjos ◽  
M. Holicki
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document