Extended electric power sources

2018 ◽  
Author(s):  
T.A. Konev ◽  
V.A. Kuzmin ◽  
E. Yu. Mutovina ◽  
R.D. Puzhaykin ◽  
Vladimir Salomatov
Keyword(s):  
Electric Power ◽  
Electric Current ◽  
Load Resistance ◽  
Active Power ◽  
Operating Voltage ◽  
Power Sources ◽  
Distributed Parameters ◽  
Analytical Expressions ◽  
Characteristic Resistance ◽  
Length Effects

Chemical sources of current are investigated as lines with distributed parameters. Analytical expressions are obtained for the voltage and active power values of the source at different distances from the beginning of the cell as well as dependences of the working voltage and active power on the source length. Effects of a reduction in the operating voltage and active power are due to the flow of electric current along the source during operation. The magnitude of these effects depends not only on the length of the source, but also on the ratio of characteristic resistance to the load resistance.<br>

Extended electric power sources

2018 ◽  
Author(s):  
T.A. Konev ◽  
V.A. Kuzmin ◽  
E. Yu. Mutovina ◽  
R.D. Puzhaykin ◽  
Vladimir Salomatov
Keyword(s):  
Electric Power ◽  
Electric Current ◽  
Load Resistance ◽  
Active Power ◽  
Operating Voltage ◽  
Power Sources ◽  
Distributed Parameters ◽  
Analytical Expressions ◽  
Characteristic Resistance ◽  
Length Effects

Chemical sources of current are investigated as lines with distributed parameters. Analytical expressions are obtained for the voltage and active power values of the source at different distances from the beginning of the cell as well as dependences of the working voltage and active power on the source length. Effects of a reduction in the operating voltage and active power are due to the flow of electric current along the source during operation. The magnitude of these effects depends not only on the length of the source, but also on the ratio of characteristic resistance to the load resistance.<br>

scholarly journals Reduction in the operating voltage and active power of extended electric power sources

2019 ◽  
Vol 1399 ◽  
pp. 022011
Author(s):  
T A Konev ◽  
V A Kuzmin ◽  
E Yu Mutovina ◽  
R D Puzhaykin ◽  
V N Salomatov
Keyword(s):  
Electric Power ◽  
Active Power ◽  
Operating Voltage ◽  
Power Sources

scholarly journals Design of smart wireless changeover for continuous electric current feeding from power sources of variable capacities

2020 ◽  
Vol 10 (4) ◽  
pp. 3460
Author(s):  
Haider A. H. Alobaidy ◽  
Hikmat N. Abdullah ◽  
Tariq M. Salman
Keyword(s):  
Power Consumption ◽  
Electric Power ◽  
Electric Current ◽  
Total Power ◽  
Power Sources ◽  
Electric Power Supply ◽  
Total Power Consumption ◽  
Electrical Devices ◽  
Vital Element

Electric power has become a vital element for life today. Despite this importance, electric power consumers in Iraq suffer from the problem of noncontinuity and daily electric power supply interruption. This problem led to the use of various sources of electric power as an alternative to compensate for the shortage of electric power provided by the Iraqi national grid. In this work, a smart wireless changeover device is designed using wireless sensor networks technology aiming to solve problem caused by the multiplicity of power sources received at home and governmental buildings in Iraq by controlling operation of some electrical devices (which consume high current) in the home or workplace automatically when changing source of electricity from one to another. This solution will help to ensure the continuity of electric current feeding from power sources of variable capacities, also, to rationalize power consumption by assigning an operation priority to electric devices. Furthermore, a statistical measurement as a case study was performed in a building with a total power consumption of 160.8 KW/h. The result showed that the device functions effectively and it is capable of achieving an average saving in power of about 50% to 86% depending on the applied priorities and case study scenario.

Science and Technology Text Mining: Electric Power Sources

2004 ◽  
Author(s):  
Ronald N. Kostoff ◽  
Rene Tshiteya ◽  
Kirstin M. Pfeil ◽  
James A. Humenik ◽  
George Karypis
Keyword(s):  
Text Mining ◽  
Electric Power ◽  
Science And Technology ◽  
Power Sources

scholarly journals ESTIMATION OF ELECTRICITY GENERATED FROM TIDAL ENERGY IN BEDONO VILLAGE OF DEMAK REGENCY

2020 ◽  
Vol 4 (9) ◽  
pp. 13-17
Author(s):  
Agus Margiantono ◽  
Titik Nurhayati ◽  
Wahib Hasbullah
Keyword(s):  
Electric Power ◽  
Current Velocity ◽  
Tidal Current ◽  
Tidal Energy ◽  
Tidal Currents ◽  
Active Power ◽  
Tidal Current Velocity ◽  
The Village

In some places in the village of Bedono Demak Regency there is a location with high tidal current velocity, the coordinates of the Location is 6 ° 55'29.0 "S 110 ° 29'11.4" E. In this study estimated the amount of electric power that can be generated from tidal currents in the village Bedono. Estimates are made by modeling the location and the Darrieus turbine using the CFD (Computating Fluid Dinamyc) Software. From the research that has been done to get the results of electric power that can be produced in the village Bedono highest at 14-16 times 3469.413W and lowest 39.002W at 22-24 hours according to the CFD is the highest active power occurred at 14-16 at 3197.064W and the lowest 35.941W at 22-24 hours.

scholarly journals PULSE METHOD FOR DETERMINATION OF TIME PARAMETERS THERMAL FIRE DETECTOR

2021 ◽  
Vol 4 (164) ◽  
pp. 166-170
Author(s):  
Ya. Kozak
Keyword(s):  
Electric Current ◽  
Time Constant ◽  
Sensitive Element ◽  
Integral Transformation ◽  
Pulse Method ◽  
Auxiliary Parameter ◽  
Sensing Element ◽  
Fire Detector ◽  
Time Parameters ◽  
Analytical Expressions

For thermal fire detectors with a thermoresistive sensitive element, the method of determining its time parameters is justified. The time parameters of operation and the time constant of the thermal fire detector are considered as time parameters. The method is based on the use of the Joule-Lenz effect, for the implementation of which single pulses of electric current are passed through the thermoresistive sensitive element of the fire detector. Pulses having the shape of a quarter sinusoid or a quarter cosinusoid are used as such test signals. Using the Laplace integral transformation, analytical expressions are obtained, which represent the formalization of the reaction of the thermoresistive sensitive element of the fire detector to the corresponding test signals. These analytical expressions are used to obtain the functional dependences of the fire detector time constants on the pulse duration of the electric current and the auxiliary parameter. The auxiliary parameter is the ratio of the values ​​of the output signal of the thermal fire detector at two fixed points in time. This choice of auxiliary parameter allows to ensure invariance with respect to the transfer coefficient of the thermal fire detector with a thermoresistive sensing element. The fixed moments of time are chosen to be equal to half and three quarters of the duration of the pulses of electric current flowing through the thermoresistive sensitive element of the fire detector. The time of operation of the thermal fire detector is determined in the form of two additive components, one of which is a time constant of the fire detector, and the other is determined by the values ​​of normalized parameters in accordance with existing regulations. A sequence of procedures is given, which together represent a method of determining the time parameters of thermal fire detectors of this type.

Sign in / Sign up

Export Citation Format

Share Document