Ti3C2-MXene/Bismuth Ferrite Nanohybrids for Efficient Degradation of Organic Dye and Colorless Pollutant

Nanohybrids, made up of Bismuth ferrites/Carbon allotropes, are extensively used in photocatalytic applications nowadays. Our work proposes a nanohybrid system composed of Bismuth ferrite nanoparticles with two-dimensional (2D) MXene sheets namely, the BiFeO3 (BFO)/Ti3C2 (MXene) nanohybrid for enhanced photocatalytic activity. We have fabricated the BFO/MXene nanohybrid using simple and low cost double solvent solvothermal method. The SEM and TEM images show that the BFO nanoparticles were attached onto the MXene surface and in the inter-layers of two-dimensional (2D) MXene sheets. The photocatalytic application is tested for the visible light irradiation which showed the highest efficiency among all pure-BFO based photocatalysts, i.e. 100% degradation in 42 min for organic dye (Congo Red) and colorless aqueous pollutant (acetophenone) in 150 min, respectively. The present BFO-based hybrid system exhibited the large surface area of 147 m2g-1measured via Brunauer-Emmett-Teller (BET) sorption-desorption technique, and is found to be largest among BFO and its derivatives. Also, the photoluminescence (PL) spectra indicate large electron-hole pair generation. Fast and efficient degradation of organic molecules is supported by both factors; larger surface area and lower electron-hole recombination rate. The BFO/MXene nanohybrid presented here is a highly efficient photocatalyst compared to other nanostructures based on pure BiFeO3 which makes it a promising candidate for many future applications.

Download Full-text

Electrical Invasiveness of Grinding and Polishing Silicon Integrated Circuits Down to 1 μm Remaining Silicon Thickness

ISTFA 2016: Conference Proceedings from the 42nd International Symposium for Testing and Failure Analysis ◽

10.31399/asm.cp.istfa2016p0166 ◽

2016 ◽

Author(s):

Robert Chivas ◽

Scott Silverman ◽

Michael DiBattista ◽

Ulrike Kindereit

Keyword(s):

Integrated Circuits ◽

Failure Analysis ◽

Electron Hole ◽

Analysis Techniques ◽

Silicon Integrated Circuits ◽

Electron Hole Pair ◽

Pair Generation ◽

Silicon Thickness ◽

Performance Timing ◽

Grinding And Polishing

Abstract Anticipating the end of life for IR-based failure analysis techniques, a method of global backside preparation to ultra-thin remaining silicon thickness (RST) has been developed. When the remaining silicon is reduced, some redistribution of stress is expected, possibly altering the performance (timing) of integrated circuits in addition to electron-hole pair generation. In this work, a study of the electrical invasiveness due to grinding and polishing silicon integrated circuits to ultra-thin (< 5 um global, ~ 1 um local) remaining thickness is presented.

Download Full-text

Preparation and photocatalytic performance of metallic Nb0.9Ta0.1S2/2D-C3N4 composite

Oxford Open Materials Science ◽

10.1093/oxfmat/itab005 ◽

2020 ◽

Vol 1 (1) ◽

Author(s):

Hanxiang Chen ◽

Jianjian Yi ◽

Zhao Mo ◽

Yanhua Song ◽

Wenshu Yang ◽

...

Keyword(s):

Separation Efficiency ◽

Low Cost ◽

Metal Sulfide ◽

Electron Hole ◽

Practical Applications ◽

Energy And Environment ◽

Photocatalytic Application ◽

Light Utilization ◽

Ternary Metal ◽

Key Issues

Abstract Photocatalysis technology has potential application in the field of energy and environment. How to expand visible light utilization and promote the separation efficiency of the carriers are the key issues for the high active photocatalysts preparation and future practical applications. In this work, a ternary metal sulfide Nb0.9Ta0.1S2 was prepared and used as an electron collector in the photocatalytic application. As a result, the generated electrons are quickly transferred to the surface of the composite to participate in the reaction. It was demonstrated that the photocatalytic activity of 2D-C3N4 was enhanced after the modification of Nb0.9Ta0.1S2. The Nb0.9Ta0.1S2/2D-C3N4 composite material was synthesized by solvothermal method. The composition of 5% Nb0.9Ta0.1S2/2D-C3N4 showed the highest H2 evolution rate of 1961.6 μmolg−1h−1, which was 6.6 times that of 2D-C3N4. The 15% Nb0.9Ta0.1S2/2D-C3N4 exhibited the best activity in Rhodamine B degradation rate of 97% in 2 h, which is 50% higher than that of 2D-C3N4. Nb0.9Ta0.1S2/2D-C3N4 can be used as electron trap to promote the effective separation of electron–hole pairs. This work provides benchmarks in exploring low-cost and efficient cocatalyst.

Download Full-text