scholarly journals A Rainfall - Runoff Model for the Highly Regulated Lake Taupo Catchment, Using a Constrained Ensemble Kalman Filter to Improve the Accuracy and Reliability of Model Output

2021 ◽  
Author(s):  
◽  
Deborah Maxwell

<p>Lake Taupo is the effective source of the Waikato River. The Waikato Power Scheme relies on the outflow from the lake for moderated flows throughout the year. As the lake is maintained between a 1.4m operating range, it is the inflows to the lake that determine the amount of water available to the scheme for electricity generation. These inflows have not been modelled in any detail prior to this dissertation. This dissertation aims to develop a predictive rainfall-runoff model that can provide accurate and reliable inflow and lake level forecasts for the Lake Taupo catchment. Model formulation is guided by a fundamental understanding of catchment hydrologic principles and an in-depth assessment of catchment hydrologic behaviour. The model is a semi-distributed physically-consistent conceptual model which aims to provide a parsimonious representation of different storages and flow pathways through a catchment. It has three linear sub-surface stores. Drainage to these stores is related to the size of the saturation zone, utilising the concept of a variable source area. This model is used to simulate inflows from gauged unregulated sub-catchments. It is also used to estimate the inflow from ungauged areas through regionalisation. For regulated sub-catchments, the model is modified to incorporate available data and information relating to the relevant scheme‟s operation, resource consent conditions and other physical and legislative constraints. The output from such models is subject to considerable uncertainty due to simplifications in the model structure, estimated parameter values and imperfect driving data. For robust decision making, it is important this uncertainty is reduced to within acceptable levels. In this study, a constrained Ensemble Kalman Filter (EnKF) is applied to the four unregulated gauged catchments to deal with model structure and data uncertainties. Used in conjunction with Monte Carlo simulations, all three sources of uncertainty are addressed. Simple mass and flux constraints are applied to the four (soil storage, baseflow, interflow and fastflow) model states. Without these constraints states can be adjusted beyond what is physically possible, compromising the integrity of model output. It is demonstrated that the application of a constrained EnKF improves the accuracy and reliability of model output.Due to the complexity of the Tongariro Power Scheme (TPS) and the limited data available to model it, the conceptual model is not suitable. Rather, a statistical probability analysis is used to estimate the discharge from this scheme given the month of the year, day of the week and hour of the day. Model output is combined and converted into a corresponding change in lake level. The model is evaluated over a wide range of hydrological and meteorological conditions. An in-depth critical evaluation is undertaken on eight events chosen a priori as representation of both extreme and „usual‟ conditions. The model provides reasonable predictions of lake level given the uncertainty with the TPS, complexity of the catchment and data/information constraints. The model performs particularly well in „normal‟ and dry conditions but also does a good job during rainfall events in light of errors associated with driving data. However, for real-time operational use the integration of the model with meteorological forecasts is required. Model recalibration would be required due to the issue of moving from point estimation to areal rainfall data. Once this is achieved, this operational model would allow robust decision-making and efficient management of the water resource for the Waikato Power Scheme. Although there is room for improvement, there is considerable scope for extending the application of the constrained EnKF and techniques for incorporating regulation to other catchments both in New Zealand and internationally.</p>

2021 ◽  
Author(s):  
◽  
Deborah Maxwell

<p>Lake Taupo is the effective source of the Waikato River. The Waikato Power Scheme relies on the outflow from the lake for moderated flows throughout the year. As the lake is maintained between a 1.4m operating range, it is the inflows to the lake that determine the amount of water available to the scheme for electricity generation. These inflows have not been modelled in any detail prior to this dissertation. This dissertation aims to develop a predictive rainfall-runoff model that can provide accurate and reliable inflow and lake level forecasts for the Lake Taupo catchment. Model formulation is guided by a fundamental understanding of catchment hydrologic principles and an in-depth assessment of catchment hydrologic behaviour. The model is a semi-distributed physically-consistent conceptual model which aims to provide a parsimonious representation of different storages and flow pathways through a catchment. It has three linear sub-surface stores. Drainage to these stores is related to the size of the saturation zone, utilising the concept of a variable source area. This model is used to simulate inflows from gauged unregulated sub-catchments. It is also used to estimate the inflow from ungauged areas through regionalisation. For regulated sub-catchments, the model is modified to incorporate available data and information relating to the relevant scheme‟s operation, resource consent conditions and other physical and legislative constraints. The output from such models is subject to considerable uncertainty due to simplifications in the model structure, estimated parameter values and imperfect driving data. For robust decision making, it is important this uncertainty is reduced to within acceptable levels. In this study, a constrained Ensemble Kalman Filter (EnKF) is applied to the four unregulated gauged catchments to deal with model structure and data uncertainties. Used in conjunction with Monte Carlo simulations, all three sources of uncertainty are addressed. Simple mass and flux constraints are applied to the four (soil storage, baseflow, interflow and fastflow) model states. Without these constraints states can be adjusted beyond what is physically possible, compromising the integrity of model output. It is demonstrated that the application of a constrained EnKF improves the accuracy and reliability of model output.Due to the complexity of the Tongariro Power Scheme (TPS) and the limited data available to model it, the conceptual model is not suitable. Rather, a statistical probability analysis is used to estimate the discharge from this scheme given the month of the year, day of the week and hour of the day. Model output is combined and converted into a corresponding change in lake level. The model is evaluated over a wide range of hydrological and meteorological conditions. An in-depth critical evaluation is undertaken on eight events chosen a priori as representation of both extreme and „usual‟ conditions. The model provides reasonable predictions of lake level given the uncertainty with the TPS, complexity of the catchment and data/information constraints. The model performs particularly well in „normal‟ and dry conditions but also does a good job during rainfall events in light of errors associated with driving data. However, for real-time operational use the integration of the model with meteorological forecasts is required. Model recalibration would be required due to the issue of moving from point estimation to areal rainfall data. Once this is achieved, this operational model would allow robust decision-making and efficient management of the water resource for the Waikato Power Scheme. Although there is room for improvement, there is considerable scope for extending the application of the constrained EnKF and techniques for incorporating regulation to other catchments both in New Zealand and internationally.</p>


2016 ◽  
Author(s):  
Jacek Kurnatowski

Abstract. The rainfall-runoff conceptual model as a cascade of submerged linear reservoirs with particular outflows depending on storages of adjoining reservoirs is developed. The model output contains different exponential functions with roots of Chebyshev polynomials of the first kind as exponents. The model is applied to IUH and recession curves problems and compared with the analogous results of the Nash cascade. Case study is performed on a basis of 46 recession periods. Obtained results show the usefulness of the model as an alternative concept to the Nash cascade.


2020 ◽  
Author(s):  
Nutchanart Sriwongsitanon ◽  
Wasana Jandang ◽  
Thienchart Suwawong ◽  
Hubert H.~G. Savenije

Abstract. A parsimonious semi-distributed rainfall-runoff model has been developed for flow prediction. In distribution, attention is paid to both timing of runoff and heterogeneity of moisture storage capacities within sub-catchments. This model is based on the lumped FLEXL model structure, which has proven its value in a wide range of catchments. To test the value of distribution, the gauged Upper Ping catchment in Thailand has been divided into 10 sub-catchments, which can be grouped into 5 gauged sub-catchments where internal performance is evaluated. To test the effect of timing, firstly excess rainfall was calculated for each sub-catchment, using the model structure of FLEXL. The excess rainfall was then routed to its outlet using the lag time from storm to peak flow (TlagF) and the lag time of recharge from the root zone to the groundwater (TlagS), as a function of catchment size. Subsequently, the Muskingum equation was used to route sub-catchment runoff to the downstream sub-catchment, before adding to runoff of the downstream sub-catchment, with the delay time parameter of the Muskingum equation being a function of channel length. Other model parameters of this semi-distributed FLEX-SD model were kept the same as in the calibrated FLEXL model of the entire Upper Ping basin, controlled by station P.1 located at the centre of Chiang Mai Province. The outcome of FLEX-SD was compared to: 1) observations at P.1; 2) the results of the calibrated FLEXL model; and 3) the semi-distributed URBS model - another established semi-distributed rainfall-runoff model. FLEX-SD showed better performance than URBS, but a bit lower than the calibrated FLEXL model with NSE of 0.74, 0.71, and 0.76, respectively. Subsequently, at the level of the gauged internal sub-catchments, runoff estimates of FLEX-SD were compared to observations and calibrated FLEXL model results. The results demonstrate that FLEX-SD provides more accurate runoff estimates at P.1, P.67 and P.75 stations which are located along the main Ping River, compared to those provided by the lumped calibrated FLEXL model. The results were less good at 2 tributary stations (P.20 and P.21), where calibrated FLEXL output performed better, while performance was similar at one tributary station (P.4A). Overall, FLEX-SD performed better than URBS at 5 out of 6 stations except at P.21. Subsequently, the effect of distributing moisture storage capacity was tested. Since the FLEX-SD uses the same Sumax value - the maximum moisture holding capacity of the root zone - for all sub-catchments, FLEX-SD-NDII was set-up making use of the spatial distribution of the NDII (the normalized difference infrared index). The readily available NDII appears to be a good proxy for moisture stress in the root zone, particularly during dry periods. The maximum moisture holding capacity in the root zone assumed to be a function of the maximum seasonal range of NDII values. The spatial distribution of this range among sub-catchments was used to calibrate the semi-distributed FLEX-SD-NDII model. The additional constraint by the NDII improved the performance of the model and the realism of the distribution. To test how well the model represents root zone soil moisture, the performance of the FLEX-SD-NDII model was compared to time series of the soil wetness index (SWI). The correlation between the root zone storage and the daily SWI appeared to be very good, even better than the correlation with the NDII, because NDII does not provide good estimates during wet periods. The SWI, which is partly model-based, was not used for calibration, but appeared to be an appropriate index for verification.


2021 ◽  
Author(s):  
◽  
Rubianca Benavidez

<p>The destructive capability of typhoons affects lives and infrastructure around the world. Spatial analysis of historical typhoon records reveal an area of intense storm activity within the Southeast Asian (SEA) region. Within SEA is the Philippines, an archipelagic tropical country regularly struck by storms that often cause severe landslides, erosion and floods. Annually, ˜20 cyclones enter the Philippine Area of Responsibility, with about nine making landfall, causing high winds and intense rainfall. Thus, significant research in the Philippines has focused on increasing the resilience of ecosystems and communities through real-time disaster forecasting, structural protections, and programmes for sustainable watershed management (e.g. rehabilitation and conservation agriculture). This dissertation focused on the third aspect through computer modelling and scenario analysis.  The study area is the Cagayan de Oro (CDO) catchment (˜1400km²) located in the Southern Philippines. The catchment experienced heavy flooding in 2012 from Typhoon Bopha and has major erosion problems due to mountainous slopes and heavy rainfall. Communities derive ecosystem services (ES) including agricultural production, water supply, recreation, mining resources, flood mitigation, etc. Since changes to the supply or distribution of these ES affects livelihoods and the hydrological response of the catchment to typhoon events, this research used the Land Utilisation and Capability Indicator (LUCI) model to understand the baseline ES and potential changes associated with basin management plans.  This was the first detailed tropical application of LUCI, including parameterising it for Philippine soil and land cover datasets in CDO and extending its capability to be applied in future tropical areas. Aside from applying LUCI in a new geoclimatic region, this research contributed to the general development of LUCI through testing and improving its sediment delivery and inundation modelling. The sediment delivery was enhanced using the Revised Universal Soil Loss Equation (RUSLE) model that allows LUCI for the first time to account for impacts of specific land management such as agroforestry and contour cropping on erosion and sediment delivery. Progress was made in updating a flatwater inundation model for use with LUCI, including converting it to Python but this requires further development and testing before it is suitable for application in the Philippines.  The development and rehabilitation scenarios showed improved flood mitigation, lower surficial soil erosion rates, and lower loads of nutrients compared to the baseline scenario. Additionally, ES mapping under different land cover scenarios has not been previously accomplished in CDO, and this research provides useful information to guide local decision-making and management planning.   The rainfall-runoff model of LUCI was tested against the Hydrologic Engineering Center’s Hydrological Modelling System (HEC-HMS), showing good agreement with observed flow. Since the rainfall-runoff model of LUCI has been minimally utilised in past applications, this CDO application elucidated directions for future work around further testing under extreme rainfall events and climate change.  Overall, this novel application of LUCI creates a framework to assist decision-making around land cover changes in the CDO, provides guidance around data requirements and parameterisation procedures to guide future international applications, and has significantly contributed to development and improvement of the LUCI framework to extend its modelling capabilities in the future.</p>


Author(s):  
Elga Apsīte ◽  
Ansis Zīverts ◽  
Anda Bakute

Application of Conceptual Rainfall-Runoff Model METQ for Simulation of Daily Runoff and Water Level: The case of the Lake Burtnieks Watershed In this study a conceptual rainfall-runoff METQ model—the latest version METQ2007BDOPT—was applied to simulate the daily runoff and water level of the Lake Burtnieks watershed from 1990 to 1999. The model structure and parameters were basically the same as in the METQ98, with some additional improvements and semi-automatical calibration performance. Model calibration was done for four rivers and one lake gauging station. The results of calibration showed a good correlation between the measured and simulated daily discharges. The Nash-Sutcliffe efficiency R2 varied from 0.90 to 0.58 and correlation coefficient r from 0.95 to 0.83. The highest values of R2 = 0.90 and r = 0.95 were obtained for the River Salaca and the lowest R2 = 0.53 and r = 0.83 for Lake Burtnieks. We observed some relationships between the model parameter values and physiographic characteristic of the sub-catchments.


2021 ◽  
Author(s):  
◽  
Rubianca Benavidez

<p>The destructive capability of typhoons affects lives and infrastructure around the world. Spatial analysis of historical typhoon records reveal an area of intense storm activity within the Southeast Asian (SEA) region. Within SEA is the Philippines, an archipelagic tropical country regularly struck by storms that often cause severe landslides, erosion and floods. Annually, ˜20 cyclones enter the Philippine Area of Responsibility, with about nine making landfall, causing high winds and intense rainfall. Thus, significant research in the Philippines has focused on increasing the resilience of ecosystems and communities through real-time disaster forecasting, structural protections, and programmes for sustainable watershed management (e.g. rehabilitation and conservation agriculture). This dissertation focused on the third aspect through computer modelling and scenario analysis.  The study area is the Cagayan de Oro (CDO) catchment (˜1400km²) located in the Southern Philippines. The catchment experienced heavy flooding in 2012 from Typhoon Bopha and has major erosion problems due to mountainous slopes and heavy rainfall. Communities derive ecosystem services (ES) including agricultural production, water supply, recreation, mining resources, flood mitigation, etc. Since changes to the supply or distribution of these ES affects livelihoods and the hydrological response of the catchment to typhoon events, this research used the Land Utilisation and Capability Indicator (LUCI) model to understand the baseline ES and potential changes associated with basin management plans.  This was the first detailed tropical application of LUCI, including parameterising it for Philippine soil and land cover datasets in CDO and extending its capability to be applied in future tropical areas. Aside from applying LUCI in a new geoclimatic region, this research contributed to the general development of LUCI through testing and improving its sediment delivery and inundation modelling. The sediment delivery was enhanced using the Revised Universal Soil Loss Equation (RUSLE) model that allows LUCI for the first time to account for impacts of specific land management such as agroforestry and contour cropping on erosion and sediment delivery. Progress was made in updating a flatwater inundation model for use with LUCI, including converting it to Python but this requires further development and testing before it is suitable for application in the Philippines.  The development and rehabilitation scenarios showed improved flood mitigation, lower surficial soil erosion rates, and lower loads of nutrients compared to the baseline scenario. Additionally, ES mapping under different land cover scenarios has not been previously accomplished in CDO, and this research provides useful information to guide local decision-making and management planning.   The rainfall-runoff model of LUCI was tested against the Hydrologic Engineering Center’s Hydrological Modelling System (HEC-HMS), showing good agreement with observed flow. Since the rainfall-runoff model of LUCI has been minimally utilised in past applications, this CDO application elucidated directions for future work around further testing under extreme rainfall events and climate change.  Overall, this novel application of LUCI creates a framework to assist decision-making around land cover changes in the CDO, provides guidance around data requirements and parameterisation procedures to guide future international applications, and has significantly contributed to development and improvement of the LUCI framework to extend its modelling capabilities in the future.</p>


2021 ◽  
Author(s):  
Nutchanart Sriwongsitanon ◽  
Wasana Jandang ◽  
Thienchart Suwawong ◽  
Hubert H. G. Savenije

Abstract. A parsimonious semi-distributed rainfall-runoff model has been developed for flow prediction. In distribution, attention is paid to both timing of runoff and heterogeneity of moisture storage capacities within sub-catchments. This model is based on the lumped FLEXL model structure, which has proven its value in a wide range of catchments. To test the value of distribution, the gauged Upper Ping catchment in Thailand has been divided into 32 sub-catchments, which can be grouped into 5 gauged sub-catchments where internal performance is evaluated. To test the effect of timing, firstly excess rainfall was calculated for each sub-catchment, using the model structure of FLEXL. The excess rainfall was then routed to its outlet using the lag time from storm to peak flow (TlagF) and the lag time of recharge from the root zone to the groundwater (TlagS), as a function of catchment size. Subsequently, the Muskingum equation was used to route sub-catchment runoff to the downstream sub-catchment, with the delay time parameter of the Muskingum equation being a function of channel length. Other model parameters of this semi-distributed FLEX-SD model were kept the same as in the calibrated FLEXL model of the entire Upper Ping basin, controlled by station P.1 located at the centre of Chiang Mai Province. The outcome of FLEX-SD was compared to: 1) observations at the internal stations; 2) the calibrated FLEXL model; and 3) the semi-distributed URBS model - another established semi-distributed rainfall-runoff model. FLEX-SD showed better or similar performance both during calibration and especially in validation. Subsequently, we tried to distribute the moisture storage capacity by constraining FLEX-SD on patterns of the NDII (normalized difference infrared index). The readily available NDII appears to be a good proxy for moisture stress in the root zone during dry periods. The maximum moisture holding capacity in the root zone is assumed to be a function of the maximum seasonal range of NDII values, and the annual average NDII values to construct 2 alternative models: FLEX-SD-NDIIMax-Min and FLEX-SD-NDIIAvg, respectively. The additional constraint on the moisture holding capacity by the NDII improved both model performance and the realism of the distribution. Distribution of Sumax using annual average NDII values was found to be well correlated with the percentage of evergreen forest in 31 sub-catchments. Spatial average NDII values were proved to be highly corresponded with the root zone soil moisture of the river basin, not only in the dry season but also in the water limited ecosystem. To check how well the model represents root zone soil moisture, the performance of the FLEX-SD-NDII model was compared to time series of the soil wetness index (SWI). The correlation between the root zone storage and the daily SWI appeared to be very good, even better than the correlation with the NDII, because NDII does not provide good estimates during wet periods. The SWI, which is partly model-based, was not used for calibration, but appeared to be an appropriate index for validation.


Sign in / Sign up

Export Citation Format

Share Document