scholarly journals DESIGN AND DEVELOPMENT OF A TUNABLE PROPORTIONAL INTEGRAL DERIVATIVE (TPID) CONTROLLER FOR A ROBOTIC ARM

2020 ◽  
Vol 4 (1) ◽  
Author(s):  
AKANINYENE M. JOSHUA ◽  
PROF. ENEH I.I
Keyword(s):  
Robotic Arm ◽  
Proportional Integral Derivative ◽  
Design And Development ◽  
Proportional Integral

scholarly journals Vertical surface contact with a Micro Air Vehicle

2020 ◽  
Vol 12 ◽  
pp. 175682932093874
Author(s):  
Aaron Lopez Luna ◽  
Israel Cruz Vega ◽  
Jose Martinez-Carranza
Keyword(s):  
Experimental Testing ◽  
Vertical Surface ◽  
Micro Air Vehicle ◽  
Robotic Arm ◽  
Proportional Integral Derivative ◽  
Proportional Integral ◽  
Full Contact ◽  
Air Vehicle ◽  
Surface Contact ◽  
Gain Scheduled

In this work, we present a novel design for vertical surface contact using a two degree of freedom robotic arm attached to a Micro Air Vehicle. To achieve this, we propose a controller based on a Gain-Scheduled Proportional–Integral–Derivative approach. In previous works, the Gain-Scheduled Proportional–Integral–Derivative method was used to control the attitude of the Micro Air Vehicle, thus mitigating the perturbations induced by the movement of the arm. The novel approach of this work focuses on the achievement of an automatized full-contact with a rigid vertical surface using a Micro Air Vehicle with a robotic arm. We have improved the capabilities of the Gain-Scheduled Proportional–Integral–Derivative control to consider the inherent issues of approximating to a flat structure in order to carry out an aerial interaction task successfully. For the Micro Air Vehicle’s position feedback, a motion capture system is used in this work. A paintbrush attached to the end effector of the arm is used to draw over a whiteboard surface to show the full contact of the aerial manipulator. A distance sensor is added to the on-board sensors to measure the distance between the vertical surface and the system to ensure a correct distance and achieve a safe contact. Experimental testing results show that the controller can maintain a stable flight with sufficient accuracy to complete the aerial interaction tasks.

Semi Automatic T-Shirt Folding Machine Berbasis PID (Proportional Integral Derivative)

2020 ◽  
Vol 2 (1) ◽  
Author(s):  
Muhammad Apriliyanto ◽  
Miftachul Ulum ◽  
Koko Joni
Keyword(s):  
Ultrasonic Sensor ◽  
Proportional Integral Derivative ◽  
Servo Motor ◽  
Aesthetic Value ◽  
Proportional Integral ◽  
Door Opening ◽  
Dc Motors ◽  
The Aesthetic ◽  
The Right

<em>The process of folding clothes is one of the activities carried out in the laundry business or household. The activity is fairly easy but many people are still lazy to do it. As a result, clothes that have been washed will fall apart in certain rooms, thereby reducing the aesthetic value of a home. Semi Automatic T-Shirt Folding Machine is the right solution to make folding clothes easier and more time efficient. This tool is equipped with a servo motor that moves the folding board that has been designed in such a way that the user only needs to manghandle the shirt just once and simply push one button then the shirt will fold itself and will be neatly arranged through the clothes stacker board. The PID method is applied to DC motors that move under the clothes folder so that the buildup of clothes underneath will not be pressured upward when the clothes are piled up when they are folded. Ultrasonic sensor will measure the right height between the clothes with the door opening the stacking clothes with kp = 1, ki = 0.1, kd = 0.5 for thin clothes and kp = 5, ki = 1, kd = 2.5 for thick clothes so that the movement of the motor can adjust its speed . This tool can fold one shirt in 16.83 seconds 11 seconds faster than folding clothes manually</em>

PERANCANGAN UJI SIRIP ROKET BAGIAN AILERON DENGAN MENGGUNAKAN KONTROL PID

2018 ◽  
Vol 14 (1) ◽  
pp. 1-11
Author(s):  
Galih Irfan Firdaus
Keyword(s):  
Proportional Integral Derivative ◽  
Accelerometer Sensor ◽  
Proportional Integral Derivative Controller ◽  
Proportional Integral

Roket merupakan sebuah peluru kendali atau suatu kendaraan terbang yang mendapatkan dorongan melalui reaksi roket secara cepat dengan bahan fluida dari keluaran mesin roket. Sistem Kendali Sirip Roket berbasis Mikrokontroller ATmega8 berguna untuk mengendalikan sirip roket khususnya bagian aileron.  Dibutuhkan komponen – komponen pendukung berupa Sensor Accelerometer, Sensor Gyroscope, ATmega8 dan Motor Servo. Alat pengendali sirip roket ini dapat digunakan untuk mengendalikan sirip roket bagian aileron pada saat posisi roket tidak stabil atau terjadi gerakan naik turun pada saat setelah diluncurkan, sehingga dapat menghasilkan penerbangan yang maksimal dalam mencapai sasaran.Perancangan yang  digunakan adalah jenis pengendalian dengan kontrol PID. PID (Proportional Integral Derivative controller) merupakan kontroller untuk menentukan presisi suatu sistem instrumentasi dengan karakteristik adanya umpan balik pada sistem tesebut. Pengontrol PID adalah pengontrol konvensional yang banyak dipakai dalam dunia industri. Karakteristik pengontrol PID sangat dipengaruhi oleh kontribusi besar dari ketiga parameter P, I dan D. Pemilihan konstanta Kp, Ki dan Kd akan mengakibatkan penonjolan sifat dari masing-masing elemen. Dalam perancangan sebuah sistem kendali menggunakan kontroller PID pada motor servo yang diharapkan mampu menggerakkan sirip naik dan sirip turun pada roket sehingga mampu menjaga kestabilan roket saat diluncurkan. Prosentase error pada proyek akhir ini adalah 0,5 %.Roket merupakan sebuah peluru kendali atau suatu kendaraan terbang yang mendapatkan dorongan melalui reaksi roket secara cepat dengan bahan fluida dari keluaran mesin roket. Sistem Kendali Sirip Roket berbasis Mikrokontroller ATmega8 berguna untuk mengendalikan sirip roket khususnya bagian aileron.  Dibutuhkan komponen – komponen pendukung berupa Sensor Accelerometer, Sensor Gyroscope, ATmega8 dan Motor Servo. Alat pengendali sirip roket ini dapat digunakan untuk mengendalikan sirip roket bagian aileron pada saat posisi roket tidak stabil atau terjadi gerakan naik turun pada saat setelah diluncurkan, sehingga dapat menghasilkan penerbangan yang maksimal dalam mencapai sasaran.Perancangan yang  digunakan adalah jenis pengendalian dengan kontrol PID. PID (Proportional Integral Derivative controller) merupakan kontroller untuk menentukan presisi suatu sistem instrumentasi dengan karakteristik adanya umpan balik pada sistem tesebut. Pengontrol PID adalah pengontrol konvensional yang banyak dipakai dalam dunia industri. Karakteristik pengontrol PID sangat dipengaruhi oleh kontribusi besar dari ketiga parameter P, I dan D. Pemilihan konstanta Kp, Ki dan Kd akan mengakibatkan penonjolan sifat dari masing-masing elemen. Dalam perancangan sebuah sistem kendali menggunakan kontroller PID pada motor servo yang diharapkan mampu menggerakkan sirip naik dan sirip turun pada roket sehingga mampu menjaga kestabilan roket saat diluncurkan. Prosentase error pada proyek akhir ini adalah 0,5 %.

PIDNN control for Vernier-gimballing magnetically suspended flywheel under nonlinear change of stiffness and disturbance

2020 ◽  
pp. 095965182097757
Author(s):  
Jiqiang Tang ◽  
Mengyue Ning ◽  
Xu Cui ◽  
Tongkun Wei ◽  
Xiaofeng Zhao
Keyword(s):  
Neural Network ◽  
Attitude Control ◽  
Magnetic Force ◽  
Magnetic Bearing ◽  
Network Control ◽  
Gradient Descent Method ◽  
Neural Network Control ◽  
Proportional Integral Derivative ◽  
Tracking Accuracy ◽  
Proportional Integral

Vernier-gimballing magnetically suspended flywheel is often used for attitude control and interference suppression of spacecrafts. Due to the special structure of the conical magnetic bearing, the radial component generated by the axial magnetic force and the change of the magnetic air gap will cause the nonlinearity of stiffness and disturbance. That will lead to not only poor stability of the suspension control system but also unsatisfactory tracking accuracy of the rotor position. To solve the nonlinear problem of the system, this article proposes a proportional–integral–derivative neural network control scheme. First, the rotor model considering the nonlinear variation of disturbance and stiffness parameters is established. Then, the weight of neural network is adjusted by the gradient descent method online to ensure the accurate output of magnetic force. Finally, the convergence analysis is carried out based on the Lyapunov stability theory. Compared with the general proportional–integral–derivative control and the radial basis function neural network control, the simulation results demonstrate that the proposed method has the highest tracking accuracy and excellent performance in improving stability. The experimental results prove the correctness of the theoretical analysis and the validity of the proposed method.

Sign in / Sign up

Export Citation Format

Share Document