The new technology of waste water treatment by using bioreactors with bio membranous movable bed – biochips

Author(s):  
Maria Y. Savostyanova ◽  
◽  
Lidia А. Norina ◽  
Arina V. Nikolaeva ◽  
◽  
...  

Retaining of water resources quality is one of the global ecological problems of the modern time. The most promising direction in solving the problem of water resources protection is the reduction of negative environmental influence of waste water from production facilities by upgrading the existing water treatment technologies. To treat utility water, technical and rain water from site facilities of Transneft system entities, the specialists developed and approved standard technological diagrams, which are used in producing treatment facilities. The standard technological diagrams provide for all necessary stages of waste water treatment ensures the reduction of pollution level to normal values. However, during operation of treatment facilities it was established, that to ensure the required quality of waste water treatment with initially high levels of pollution, the new technological solutions are necessary. The author presents the results of scientific-research work, in the context of which the best affordable technologies were identified in the area of the treatment of waste water with increased content of pollutants and non-uniform ingress pattern. On the basis of the research results the technical solutions were developed for optimization of operation of existing waste water treatment facilities by means of using combined treatment of technical and rain waters and utility waste waters and applying bioreactor with movable bed – biochips. The use of bioreactor with movable bed allows the increase in the area of active surface, which facilitates increase and retention of biomass. Biochips are completely immersed into waste waters, and biofilm is formed on the entire volume of immersion area, facilitating retention of biomass and preventing formation of sediments. Due to mixing the floating device with biofilm constantly moves along the whole area of bioreactor, and, in doing so, speeds up biochemical processes and uniformity of treatment. The advantages of a bioreactor with movable bed – its active sludge durability against increased and changing pollutant concentrations, change of waste water temperature and simplicity of application – ensured the possibility of its use for blending utility waters, technical and rain waters.

2007 ◽  
Vol 2 (1) ◽  
Author(s):  
D.A. Danilovich ◽  
M.N. Kozlov ◽  
V.I. Sklyar ◽  
Yu.A. Nikolaev ◽  
N.M. Shchegolkova ◽  
...  

This work demonstrates a possibility of composting of municipal waste waters sludge (WWS) digested during 5-7 days, of the Kuryanovo waste water treatment plants (the city of Moscow) without the use of traditional organic additives – sawdust, peat, thatch. As a recycling filler (repeatedly used), enhancing the porosity of the composted mixture, ribbed polyethylene spheres (∅=8 cm) and wood chips (having dimension of 5-10 cm) were used. Composting was performed efficiently in both cases, however, the use of wood ships had technological and economical advantages. The process of composting was carried out during 2-4 weeks and was composed of classical phases of active heating (a rate of 0.2-0.3oC/h was obtained), maintaining of maximum temperature during 1-2 days, and cooling down to the ambient temperature. During the course of composting, a product was obtained, having attractive organoleptic properties, suitable for application in municipal laying-out of greenery.


1992 ◽  
Vol 26 (9-11) ◽  
pp. 2609-2612
Author(s):  
D.-Th. Kollatsch

The most important task of urban drainage and waste water treatment in the future is the environmental care of rivers and receiving waters. For this it is necessary to have a look at all discharges of sewer systems and treatment facilities. With simulation models the interactions between surface, sewer systems, overflow structures and treatment facilities can be shown. With these models the efficiency of upgrading measures can be proved in all parts of urban water systems.


2012 ◽  
Vol 441 ◽  
pp. 1-4
Author(s):  
Peter J. Hauser

Conventional methods of dyeing cotton with direct and fiber reactive dyes involve large amounts of water and salt and generate significant amounts of highly colored effluent that is difficult to treat in waste water treatment facilities. Cationization of cotton with 3-chloro-2-hydroxypropyltrimethylammonium chloride allows dyeing with direct and fiber reactive dyes with less water and energy usage as well as the eliminating the need for salt. This paper summarizes work to date on the benefits of using cationized cotton.


Author(s):  

Analysis of possibilities of the existing urban waste water treatment techniques has been presented. It is mentioned that the problem of the beat available techniques choice is inseparably linked with correction of the current normalizing system in terms of composition of not only treated waste waters but also in terms of requirements to enterprises that dispose water into a sewage network.


Author(s):  

A possibility of nickel ions and copper ions recovery from galvanic waste waters with electro-coagulation sludge that is formed in the process of electro/chemical cleaning of galvanic drainage pipes with the use of soluble aluminum anodes has been demonstrated. Nickel ions recovery from the galvanic waste water in case of the optimal proportion of the sludge has reached at least 55 %.


Sign in / Sign up

Export Citation Format

Share Document