scholarly journals UNIVERSAL THREE-PHASE FERRORESONANCE STABILIZERS

2016 ◽  
Vol 19 (1) ◽  
Author(s):  
GEORGI GEORGIEV ◽  
NADEZHDA EVSTATIEVA
Keyword(s):  
Comparative Analysis ◽  
Experimental Studies ◽  
Voltage Stabilizer ◽  
Satisfactory Accuracy ◽  
Three Phase ◽  
Theoretical Results

A comparative analysis has been carried out on two options of three-phase parametric current sources (inductive-capacitive stabilizers). Their capacities to operate in voltage stabilizer mode have been studied. Such capacities were proven and their conditions were defined. Theoretical results were experimentally checked and confirmed with satisfactory accuracy. Based on theoretical and experimental studies it was proven that the considered systems can operate in both modes – as current and voltage stabilizers.

scholarly journals Experimental Studies of the Developed Method for Determining the Insulation Parameters in an Asymmetric Network by a Voltage up to 1000 V at Mining Enterprises

2020 ◽  
Vol 220 ◽  
pp. 01032
Author(s):  
A. B. Utegulov ◽  
I. V. Koshkin ◽  
A. I. Koshkina
Keyword(s):  
Phase Shift ◽  
Experimental Studies ◽  
Electrical Network ◽  
Electrical Networks ◽  
Phase Voltage ◽  
Line Voltage ◽  
Satisfactory Accuracy ◽  
Three Phase ◽  
Before And After

In the work experimental studies of the developed method for determining the insulation parameters in an asymmetric electrical network by a voltage up to 1000 V at mining enterprises were carried out. It is based on measuring the module values of line voltage, angle of phase shift between vectors of damaged phase voltage relative to the ground and line voltage at two other phases, as well on measuring the module value of damaged phase voltage relative to the ground before and after connecting additional capacitive conductivity between the network’s phases and the ground. The results of experiment showed that the developed method for determining the insulation parameters has satisfactory accuracy and safety when operating three-phase electrical networks by voltage up to 1000 V at mining enterprises.

Study of a Vibratory Feeder with Repulsive Surface Which Has Directional Characteristic

1980 ◽  
Vol 102 (1) ◽  
pp. 94-101 ◽  
Author(s):  
S. Okabe ◽  
Y. Yokoyama
Keyword(s):  
Experimental Studies ◽  
Directional Characteristic ◽  
Vibratory Feeder ◽  
The Mean ◽  
Theoretical Results

This paper treats the motion of a particle on a vibratory feeder whose track has directional characteristic in repulsive motion, for examples, obliquely bristled track, obliquely sliced track and so on. Under some assumptions, the practical equation for predicting the mean conveying velocity is shown and the relations between conveying condition and the mean conveying velocity are clarified theoretically. These relations are shown in various diagrams. Referring these diagrams, the optimum conveying conditions are discussed also. The theoretical results show that the mean conveying velocity is considerably larger than that of the ordinary feeder. The theoretical results are confirmed by experimental studies.

scholarly journals ДОСЛІДЖЕННЯ ГІГІЄНІЧНИХ ВЛАСТИВОСТЕЙ МАТЕРІАЛІВ НАТІЛЬНОЇ ЛІКАРНЯНОЇ БІЛИЗНИ

2020 ◽  
Vol 140 (6) ◽  
pp. 38-47
Author(s):  
І. О. Іванов ◽  
Н. П. Супрун ◽  
Ю. О. Ващенко
Keyword(s):  
Comparative Analysis ◽  
Materials Science ◽  
Experimental Studies ◽  
Operating Conditions ◽  
Raw Material ◽  
Experimental Investigations ◽  
Textile Materials ◽  
Composition And Structure ◽  
Innovative Materials ◽  
Basic Functions

Investigation of the influence of the peculiarities of raw material composition and structure of traditional and innovative linen textile materials on their hygienic properties. Theoretical and experimental investigations are based on the main positions of textile materials science. In experimental studies, modern standardized methods for determining the hygienic properties of textile materials were used, as well as techniques specially developed taking into account the peculiarities of the operating conditions of underwear. The peculiarities of the operating conditions and the basic functions of hospital underwear were determined. The comparative analysis of hygienic properties of traditional and modern fabrics for underwear was carried out. Using the standardized and the developed methods, adapted to the peculiarities of the conditions of use of the products, the indicators characterizing the processes of water absorption of the materials were experimentally determined. On the basis of the obtained values of quality indicators, a comprehensive assessment of the ability of materials to transfer moisture and air, with the calculation of the arithmetic complex quality index was done. This allowed to determine the material that is optimal in properties, which provides thermophysiological comfort when operating hospital underwear. Using the developed methods, which take into account the specifics of the operating conditions, a comparative analysis of the hygienic properties of traditional and innovative materials for underwear was carried out. A new range of textile materials for underwear has been proposed, taking into account the peculiarities of the operational situation of consumption.

scholarly journals MHD-waves in the geomagnetic tail: A review

10.12737/7168 ◽  
2015 ◽  
Vol 1 (1) ◽  
pp. 4-22 ◽  
Author(s):  
Анатолий Леонович ◽  
Anatoliy Leonovich ◽  
Виталий Мазур ◽  
Vitaliy Mazur ◽  
Даниил Козлов ◽  
...  
Keyword(s):  
Numerical Models ◽  
Experimental Studies ◽  
Low Frequency ◽  
Detailed Comparison ◽  
Mhd Waves ◽  
Theoretical Studies ◽  
Geomagnetic Tail ◽  
Magnetopause Oscillations ◽  
Experimental And Theoretical Studies ◽  
Theoretical Results

This article presents the review of experimental and theoretical studies on ultra-low-frequency MHD oscillations of the geomagnetic tail. We consider the Kelvin–Helmholtz instability at the magnetopause, oscillations with a discrete spectrum in the “magic frequencies” range, the ballooning instability of coupled Alfvén and slow magnetosonic waves, and “flapping” oscillations of the current sheet of the geomagnetic tail. Over the last decade, observations from THEMIS, CLUSTER and Double Star satellites have been of great importance for experimental studies. The use of several spacecraft allows us to study the structure of MHD oscillations with high spatial resolution. Due to this, we can make a detailed comparison between theoretical results and those obtained from multi-spacecraft studies. To make such comparisons in theoretical studies, in turn, we have to use the numerical models closest to the real magnetosphere.

scholarly journals Optimization and comparative analysis of PID and FOPID controller for BLDC motor

2019 ◽  
Vol 8 (3) ◽  
pp. 174
Author(s):  
P. Vimala ◽  
C. R. Balamurugan ◽  
A. Subramanian ◽  
T. Vishwanath
Keyword(s):  
Genetic Algorithm ◽  
Comparative Analysis ◽  
Input Signal ◽  
Pid Controller ◽  
Input Voltage ◽  
Bldc Motor ◽  
Phase Inverter ◽  
Three Phase ◽  
The Stability ◽  
Three Phase Inverter

The FOPID and PID controller are designed to control the speed of <br /> the BLDC motor. The parameters , , , λ and µ of these controller are optimized based on genetic algorithm. The optimized coefficients keep in track with zero error signals. The output of the controller is given to the variable dc source which varies the input voltage to the three phase inverter depending on the input signal. The three phase inverter gives the voltage to the BLDC motor which enhances the stability of the system. <br /> The effectiveness of the controller is demonstrated by simulation.

Sign in / Sign up

Export Citation Format

Share Document