scholarly journals Perancangan Sistem Jaringan Komputer Menggunakan Teknik Failover Pada Routing Static Yang Bersifat Recursive Connection

2019 ◽  
Vol 17 (2) ◽  
pp. 61
Author(s):  
Budi Hartanto
Keyword(s):  
System Design ◽  
Computer Network ◽  
Data Packet ◽  
Main Line ◽  
Network System ◽  
Data Packets ◽  
Network Connection ◽  
Static Routing ◽  
Point Center

In a computer network system when using more than one router that is interconnected will experience a problem in the process of sending data packets. The problem is that if the main line is disconnected, then the data packet is unable to send data to a computer network system. The purpose of this study is to make a computer network system design with fail over technique on the type of static routing that is not directly connected. In this case the researcher used the Microtub Router Board RB-951-2nd. Failover technique is a way to transfer routing paths when the main line is broken, so it can be diverted to the backup routing path, this is so that the computer network connection path continues smoothly. The researcher used a recursive network connection case or the router is not connected directly to the main point center (main gateway), so the researcher used the optimization of the Target Scope and Distance features in the Microtic Router Board. The results of this study was that the backup routing path was able to channel data packets within the network if the main line did not respond or could not be connected.

scholarly journals JURNAL SIMULASI PERANCANGAN JARINGAN LAN PADA WARNET YO

2020 ◽  
Author(s):  
ADITYA WIRAGUNA ◽  
Tisa Seftiananda ◽  
Pandu Pratama Putra M.Kom
Keyword(s):  
Network Design ◽  
Computer Network ◽  
Network System ◽  
Network Connection ◽  
Packet Tracer ◽  
The Cost

Computer network connection is a fundamental thing and is very important in the establishment of internet cafe businesses. LAN network design must also consider the cost budget so that the use of tools can be maximized and not cause losses. If the connection is problematic, then all types of applications that run through a computer network cannot be used. Cisco Packet Tracer can be used for simulations that reflect a picture of the computer network connection on the network system to be used

scholarly journals Perancangan Jaringan Pada Client – Server Menggunakan Aplikasi Cisco Paket Tracer

2019 ◽  
Author(s):  
Bayu Kurniawan
Keyword(s):  
Computer Networks ◽  
Computer Network ◽  
Network System ◽  
Star Topology ◽  
Client Server ◽  
Network Connection ◽  
Packet Tracer

Computer network connection is a fundamental thing in a network because if a connection is problematic, then all types of applications that run through a computer network cannot be used. Cisco Packet Tracer can be used for simulations that reflect a picture of the computer network connection on the network system used. This paper designs two designs, namely the design with a star topology from one server using Cisco Packet Tracer software and connecting networks between computers. The results of this study are the connection between computer networks. This study was conducted to find out whether the server and client computers can communicate with each other

Tactical Mobile Mesh Network System Design

2007 ◽  
Author(s):  
Adam Blair ◽  
Thomas Brown ◽  
Keith M. Chugg ◽  
Mark Johnson
Keyword(s):  
System Design ◽  
Mesh Network ◽  
Network System

scholarly journals IMPLEMENTASI APLIKASI SOFTWARE NATURAL NETWORK MENDETEKSI TINGKATAN SERANGAN DDOS PADA JARINGAN KOMPUTER

2021 ◽  
Vol 14 (2) ◽  
pp. 268-277
Author(s):  
Etza nofarita
Keyword(s):  
Information System ◽  
Network Security ◽  
Computer Network ◽  
Large Data ◽  
Small Data ◽  
Network System ◽  
Security Issues ◽  
Or Groups ◽  
Computer Network Security ◽  
Damage Data

Security issues of a system are factors that need to be considered in the operation of information systems, which are intended to prevent threats to the system and detect and correct any damage to the system. Distributed Denial of Services (DDOS) is a form of attack carried out by someone, individuals or groups to damage data that can be attacked through a server or malware in the form of packages that damage the network system used. Security is a mandatory thing in a network to avoid damage to the data system or loss of data from bad people or heckers. Packages sent in the form of malware that attacks, causing bandwidth hit continuously. Network security is a factor that must be maintained and considered in an information system. Ddos forms are Ping of Death, flooding, Remote controled attack, UDP flood, and Smurf Attack. The goal is to use DDOS to protect or prevent system threats and improve damaged systems. Computer network security is very important in maintaining the security of data in the form of small data or large data used by the user.

scholarly journals Analysis, Synthesis and Experiments of Networked Platoons with Communication Constraints

2017 ◽  
Vol 29 (1) ◽  
pp. 35-44 ◽  
Author(s):  
Ligang Wu ◽  
Zibao Lu ◽  
Ge Guo
Keyword(s):  
Data Packet ◽  
Linear Matrix ◽  
Multiple Time ◽  
Communication Constraints ◽  
Data Packets ◽  
Controller Gain ◽  
Analysis And Synthesis ◽  
Data Processor ◽  
Vehicle Platoons ◽  
Matched Data

This paper investigates the analysis and synthesis of networked vehicle platoons with communication delays, packet dropouts and disorders. In order to deal with the effects of the communication constraints, we introduce a novel Smart Data Processor (SDP) for each vehicle, by which the latest data packets from logic Data Packet Processor and the matched data packet from its Buffer can be obtained. Based on this mechanism, a leader-predecessor-follower control strategy is proposed. In order to guarantee the asymptotic and string stability, the platoon control problem is transformed into a multi-objective H∞-type synthesis problem with the multiple time-varying delays. A sufficient condition for designing the controller gain is derived by solving a set of linear matrix inequalities. Numerous simulations and experiments with laboratory scale Arduino cars show the efficiency of the proposed methods.

scholarly journals Virtual Link Aggregation Network Performance Using MikroTik Bonding

2020 ◽  
Vol 2 (2) ◽  
pp. 131-139
Author(s):  
Firmansyah Firmansyah ◽  
Mochamad Wahyudi ◽  
Rachmat Adi Purnama
Keyword(s):  
Quality Of Service ◽  
Transfer Rate ◽  
Network Performance ◽  
Data Packet ◽  
Virtual Link ◽  
Interface Bonding ◽  
Data Packets ◽  
Bandwidth Optimization ◽  
Network Link

Quality of Service in a network is a big thing that must be resolved and dealt with as best as possible. The limitation of the maximum transfer rate in network devices creates an obstacle in the process of transferring data packets. To maximize the transfer rate in network devices, you can use Virtual Link Aggregation which can offer bandwidth optimization and failover in the network. Link aggregation is a solution in combining several physical links into one logical link. The method used in this research is to consider the allocation of bandwidth, load balancing and failover in the link aggregation. From the results of the link aggregation test using two (2) interface bonding, the results of the bandwidth averages when there is a UPD data packet transfer to 0 bps / 184.9 Mbps, which was previously around 0 bps / 91.6 Mbps. While the result of the bandwidth averages when the TCP data packet transfer occurs is 0 bps / 105.5 Mbps, which was previously around 0 bps / 93.8 Mbps. Link Aggregation using a Mikrotik Router is a solution to produce a larger Throughput Bandwidth by combining two (2) Ethernet Physical Links into one logical link.

Sign in / Sign up

Export Citation Format

Share Document