scholarly journals Perancangan Jaringan Pada Client – Server Menggunakan Aplikasi Cisco Paket Tracer

2019 ◽  
Author(s):  
Bayu Kurniawan
Keyword(s):  
Computer Networks ◽  
Computer Network ◽  
Network System ◽  
Star Topology ◽  
Client Server ◽  
Network Connection ◽  
Packet Tracer

Computer network connection is a fundamental thing in a network because if a connection is problematic, then all types of applications that run through a computer network cannot be used. Cisco Packet Tracer can be used for simulations that reflect a picture of the computer network connection on the network system used. This paper designs two designs, namely the design with a star topology from one server using Cisco Packet Tracer software and connecting networks between computers. The results of this study are the connection between computer networks. This study was conducted to find out whether the server and client computers can communicate with each other

scholarly journals JURNAL SIMULASI PERANCANGAN JARINGAN LAN PADA WARNET YO

2020 ◽  
Author(s):  
ADITYA WIRAGUNA ◽  
Tisa Seftiananda ◽  
Pandu Pratama Putra M.Kom
Keyword(s):  
Network Design ◽  
Computer Network ◽  
Network System ◽  
Network Connection ◽  
Packet Tracer ◽  
The Cost

Computer network connection is a fundamental thing and is very important in the establishment of internet cafe businesses. LAN network design must also consider the cost budget so that the use of tools can be maximized and not cause losses. If the connection is problematic, then all types of applications that run through a computer network cannot be used. Cisco Packet Tracer can be used for simulations that reflect a picture of the computer network connection on the network system to be used

scholarly journals Perancangan Sistem Jaringan Komputer Menggunakan Teknik Failover Pada Routing Static Yang Bersifat Recursive Connection

2019 ◽  
Vol 17 (2) ◽  
pp. 61
Author(s):  
Budi Hartanto
Keyword(s):  
System Design ◽  
Computer Network ◽  
Data Packet ◽  
Main Line ◽  
Network System ◽  
Data Packets ◽  
Network Connection ◽  
Static Routing ◽  
Point Center

In a computer network system when using more than one router that is interconnected will experience a problem in the process of sending data packets. The problem is that if the main line is disconnected, then the data packet is unable to send data to a computer network system. The purpose of this study is to make a computer network system design with fail over technique on the type of static routing that is not directly connected. In this case the researcher used the Microtub Router Board RB-951-2nd. Failover technique is a way to transfer routing paths when the main line is broken, so it can be diverted to the backup routing path, this is so that the computer network connection path continues smoothly. The researcher used a recursive network connection case or the router is not connected directly to the main point center (main gateway), so the researcher used the optimization of the Target Scope and Distance features in the Microtic Router Board. The results of this study was that the backup routing path was able to channel data packets within the network if the main line did not respond or could not be connected.

scholarly journals WORKSHOP SIMULASI JARINGAN DASAR KOMPUTER MENGGUNAKAN CISCO PACKET TRACER

2018 ◽  
Vol 1 (2) ◽  
pp. 33-40
Author(s):  
Hambali Hambali ◽  
Romy Aulia ◽  
Mardalius Mardalius
Keyword(s):  
Computer Network ◽  
Theoretical Explanation ◽  
Network Technology ◽  
Network Computer ◽  
Network Connection ◽  
Abstract Knowledge ◽  
Lecture Method ◽  
Material Practice ◽  
Practice Method ◽  
Packet Tracer

Abstract :Knowledge of computer science today is very necessary especially for students. One of them learns computer network which is a science that many people need. Associated with the existence of computer network so many jobs like send data, print paper to one printer by many computers easy to do. However, the knowledge of this is difficult to be able to by students in schools due to many obstacles such as incomplete equipment, competent tutors in their field no, that is experienced by students of SMA Negeri 1 Air Joman Kabupaten Asahan. Then need a solution that provides that knowledge. Cisco packet tracer which is a free application that can provide an overview of the computer network. With these applications it will be easy to provide knowledge of computer networks that can be provided through lectures, frequently asked questions and practice. The lecture method used is intended to provide a theoretical explanation of computer network material. Practice method is used to show directly how to make network cable and data communications. So that the benefits gained from this workshop activities is to increase students' knowledge of network technology and students are able to make a network connection with cable.Keywords :Network, Computer, CiscoAbstrak :Pengetahuan akan ilmu komputer saat ini sangat diperlukan terkhusus untuk kalangan pelajar.Salah satunya belajar jaringan komputer yang merupakan ilmu yang banyak dibutuhkan masyarakat.Berhubungan dengan adanya jaringan komputer maka banyak pekerjaan seperti kirim data, cetak kertas ke satu printer oleh banyak computer mudah dilakukan. Namun, pengetahuan akan hal ini sulit di dapat oleh pelajar di sekolah berhubung banyak kendala seperti peralatan yang tidak lengkap, tutor yang berkompeten dibidangnya tida ada, itulah yang dialami oleh siswa SMA Negeri 1 Air Joman Kabupaten Asahan. Maka perlu solusi yang memberikan pengetahuan tersebut.Cisco packet tracer yang merupakan aplikasi gratis yang dapat memberikan gambaran atas jaringan komputer. Dengan aplikasi tersebut maka akan mudah memberikan pengetahuan akan jaringan komputer yang dapat diberikan melalui ceramah, tanya jawab dan praktek. Metode ceramah yang digunakan dimaksudkan untuk memberikan penjelasan secara teori terhadap materi jaringan komputer.Metode praktek digunakan untuk menunjukan langsung cara membuat kabel jaringan dan komunikasi data. Sehinga manfaat yang diperoleh dari kegiatan workshop ini adalah meningkatkan pengetahuan siswa terhadap teknologi jaringan dan siswa mampu membuat koneksi jaringan dengan kabel.Kata kunci : Jaringan, Komputer, Cisco

scholarly journals simulasi jaringan local area network menggunakan cisco packet tracer

2019 ◽  
Author(s):  
alfin aswar
Keyword(s):  
Wireless Networks ◽  
Electromagnetic Waves ◽  
Computer Network ◽  
Local Area Network ◽  
Local Area ◽  
Area Network ◽  
Client Server ◽  
Network Applications ◽  
Packet Tracer ◽  
Server System

A computer network is a system consisting of computers that are designed to be able to shareresources (printers, CPUs), communicate (telephones, short messages), and can accessinformation (websites). The purpose of a computer network is to be able to achieve itsobjectives, every part of a computer network can request and provide services (service). Inalmost all computer network applications Parties who request / receive services are calledclients (clients) and those who provide / send services are called servers ( server). This design iscalled a client-server system. Networks are divided into 2 types based on their transmissionmedia, namely: 1. wired network and 2. wireless network. Wired Network is a data transmissionmedium used in this network in the form of cables and wireless networks that do not use cableinstead of using electromagnetic waves as the main transmission media.

scholarly journals A Comparison between the Use of Cisco Packet Tracer and Graphical Network Simulator 3 as Learning Media on Students’ Achievement

2018 ◽  
Vol 24 (1) ◽  
pp. 132-136
Author(s):  
Liska Mey Ika Sari ◽  
Puspanda Hatta ◽  
Endar Suprih Wihidayat ◽  
FENG Xiao
Keyword(s):  
Computer Networks ◽  
Computer Network ◽  
Network Simulator ◽  
Learning Achievement ◽  
Experiment Method ◽  
Before And After ◽  
Packet Tracer ◽  
Network Simulators ◽  
The Difference ◽  
Improved Learning

Usually in studying the practice of computer networks, it is encountered several obstacles such as (1) limited computer networks design tools, (2) limited learning time to design computer networks and (3) technical difficulties for finding the solutions of errors. To overcome those barriers as proposed in this study, computer network simulators were used. Computer network simulators were expected to help students designing and simulating networks planned to be applied to computer network practices. This study used two simulators to compare its effectiveness in assisting the students to learn computer networks, which were Cisco Packet Tracer and Graphical Network Simulator 3 (GNS3). This study was aimed to determine the difference of the influence of network simulators to (1) learning achievement, and (2) learning achievement improvement. The quasi-experiment method was used and data were collected through conducting testing before and after the utilization of the simulators. Based on the testing results it was concluded that (1) different effect of using Cisco Packet Tracer and GNS3, the average grade achievement in the class using GNS3 and using Cisco packet tracer were 76.67 and 70 respectively, and (2) improved learning achievement using GNS3 for around 35%, higher than using Cisco Packet Tracer.

METHODS OF APPLICATION OF SIMULATION SYSTEMS FOR CORPORATE COMPUTER NETWORKS DESIGNING

2020 ◽  
pp. 58-63
Author(s):  
М.Ю. Сергеев ◽  
Т.И. Сергеева
Keyword(s):  
Computer Networks ◽  
Design Methodology ◽  
Computer Network ◽  
Network Simulation ◽  
Simulation System ◽  
Simulation Tools ◽  
Packet Tracer ◽  
Simulation Systems ◽  
Methods Of Application

Описан подход к проектированию корпоративных компьютерных сетей с применением моделирующих систем. Предложена методика проектирования сети, выбора компонентов сети, настройки параметров работы сети, проверки работоспособности сети. Методика проектирования базируется на использовании CASE-средств моделирования сетей. Приведен алгоритм применения моделирующей системы Cisco Packet Tracer для проектирования компьютерной сети. An approach to the design of corporate computer networks using simulation systems is described. A methodology for designing a network, selecting network components, adjusting the parameters of the network, checking the operability of the network is proposed. The design methodology is based on the use of CASE network simulation tools. An algorithm for using the Cisco Packet Tracer simulation system for designing a computer network is presented.

scholarly journals APPLICATION OF COMBINED MODELS OF COMPUTER NETWORKS IN THE TRAINING PROCESS

2019 ◽  
pp. 24-31
Author(s):  
Vadym Abramov
Keyword(s):  
Computer Networks ◽  
Real World ◽  
Computer Network ◽  
Simulation Tools ◽  
Control Programs ◽  
Industrial Networks ◽  
Large Numbers ◽  
Packet Tracer ◽  
Combined Models ◽  
Smart Things

An overview of computer network simulation tools is being conducted in order to create a methodology for studying the relevant disciplines in higher school. The analysis of positive and negative properties of virtual and physical means of simulation of computer networks is carried out. It is concluded that the best for educational institutions are combined models that are quite budget and allow to compile and study practically unlimited topologies of networks, as well as gain experience with real physical equipment. The analysis of virtual simulation tools shows that they contain the means of interaction of the virtual network with external real equipment. This makes it possible to create a composite platform in which part of the model is virtual and the part is actually physical. This allows budget funds to quickly create models of large numbers of networks and allows students to get more information on working with hardware in conditions close to real industrial networks. The platform of the combined modeling is very convenient to use for researching systems on the Internet of Things. It helps in designing to simulate and explore real-world control systems for a large number of virtual "Smart Things" that are presented in the new Cisco Packet Tracer 7.0 simulator. These virtual things can be controlled from external means of the real world through laptops, tablets, etc. Create realistic control programs and related software for this and adjust them in conditions of maximum approximation to reality. New modeling technologies are the basis for the emergence of new teaching methods that are used at the Kiev University of B. Grinchenko.

scholarly journals Algorithm and Technical Solutions for Dynamic Configuration of Client-Server Computing Networks

2020 ◽  
Vol 19 (5) ◽  
pp. 1018-1049
Author(s):  
Roman Maximov ◽  
Sergey Sokolovsky ◽  
Ivan Voronchikhin
Keyword(s):  
Computer Networks ◽  
Computer Network ◽  
Dynamic Control ◽  
Configuration Model ◽  
Functional Characteristics ◽  
Dynamic Configuration ◽  
Client Server ◽  
Calculation Results ◽  
Network Intelligence ◽  
Server Computer

The main factors that determine the expansion of capabilities and increase the effectiveness of network intelligence to identify the composition and structure of client-server computer networks due to the stationarity of their structural and functional characteristics are analyzed. The substantiation of an urgent problem of dynamic management of structurally-functional characteristics of the client-server computer networks functioning in the conditions of network reconnaissance is resulted on the grounds of the revealed protection features of client-server computer networks at the present stage that is based on realization of principles of spatial safety maintenance, and also formalization and introduction of forbidding regulations. The mathematical model allowing to find optimum modes for dynamic configuration of structurally-functional characteristics of client-server computer networks for various situations is presented. Calculation results are given. An algorithm is presented that makes it possible to solve the problem of dynamic configuration of the structural and functional characteristics of a client-server computer network, which reduces the reliability time of data obtained by network intelligence. The results of practical tests of software developed on the basis of the dynamic configuration algorithm of client-server computer networks are shown. The obtained results show that the use of the presented solution for the dynamic configuration of client-server computer networks allows to increase the effectiveness of protection by changing the structural and functional characteristics of client-server computer networks within several subnets without breaking critical connections through time intervals that are adaptively changed depending on the functioning conditions and the attacker’s actions. The novelty of the developed model lies in the application of the mathematical apparatus of the Markov’s theory of random processes and Kolmogorov’s solution of equations to justify the choice of dynamic configuration modes for the structural and functional characteristics of client-server computer networks. The novelty of the developed algorithm is the use of a dynamic configuration model for the structural and functional characteristics of client-server computer networks for the dynamic control of the structural and functional characteristics of a client-server computer network in network intelligence.

Sign in / Sign up

Export Citation Format

Share Document