Effect of Pre-Blending and Phase-Mixing Methods on Properties of Natural Rubber and Acrylonitrile Butadiene Rubber Blends Filled with Nano Silica Extracted from Rice Husk Ash

Properties of natural rubber (NR) and acrylonitrile butadiene rubber (NBR) blends are varied due to blending method. The literature is evident that the pre-blending and phase-mixing methods affect the properties of blends while opposite arguments are also available. Hence, that fact was interested to study using NR/NBR blends filled with rice husk ash nano silica (RHANS) having an average particle size of 50 nm - 100 nm with some micro-scale agglomerates. The structure of RHANS was proved using X-ray diffraction and Fourier transform infrared spectrophotometric analyses. Blends were prepared following both blending methods by varying NR to NBR ratio as 0:100, 20:80, 40:60, 60:40, 80:20, and 100:0 while filling 25 parts per hundred parts of rubber of RHANS. The control was the ASTM formulation for oil seals. Vulcanization properties of blends showed acceptable levels with extended scorch and cure times and high torque properties. Blends indicated less tensile and tear strength compared to the control while showing acceptable hardness, compression set, and swelling properties. Overall, there is a possibility to use RHANS in NR/NBR blends and it was found that the blending method does not affect the properties of the NR/NBR blends.