Sodium Tartrate

2021 ◽  
Keyword(s):  
Soil Research ◽  
2003 ◽  
Vol 41 (5) ◽  
pp. 905 ◽  
Author(s):  
Richard N. Collins ◽  
Graham Merrington ◽  
Mike J. McLaughlin ◽  
Jean-Louis Morel

Although the movement of Zn from the solid to the solution phase of soils is a significant process preceding plant uptake, the quantity of metal that can be solubilised through rhizosphere processes is also extremely important. Therefore, the consequences of plant-derived organic ligands, and changes in pH on the isotopically exchangeable quantity of Zn (E value) were examined in a polluted acid and calcareous soil. Variations in pH were facilitated through the use of dilute NaOH or HNO3 solutions. The organic ligands studied included 0.25–5 mM concentrations of sodium tartrate, the free acid and sodium salt of citrate, histidine, and deoxymugineic acid. As expected, the organic ligands and a reduction in pH increased the solution concentration of Zn in these soils. Furthermore, through the application of isotopic dilution techniques, it was determined that some of these organic ligands could significantly increase the quantity of isotopically exchangeable Zn. However, with the exception of the 5 mM sodium citrate treatment in the calcareous soil, pH was the overriding parameter that effected changes in the E value. Reducing the pH by approximately 2 units increased the E value by 39 and 80%, respectively, in the acid and calcareous soil. Conversely, evidence for Zn fixation (a decrease of the E value) was observed in the acid soil when pH was increased. The exudation of organic ligands and variations of pH induced by plants have the potential to significantly vary the quantity of phytoavailable Zn in these 2 polluted soils.


2022 ◽  
Vol 905 ◽  
pp. 192-197
Author(s):  
Lin Lin Cai ◽  
Xiao Qing Jiang

A new composite of graphene/MoS2 is synthesized by co-exfoliation of graphite and MoS2 in isopropanol (IPA) using the organic salt potassium sodium tartrate as the assistant. The composite is characterized by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Raman spectra. The results of TEM, XPS, and Raman spectra all illustrate that the graphene/MoS2 composite has been synthesized successfully. Furthermore, the composite is modified on glassy carbon electrode to fabricate a sensor to detect dopamine (DA). The sensor shows two linear detection ranges for DA. One is 1-45 μM and the other is 45-120 μΜ. The detection limit of the sensor (S/N=3) is 0.76 μM.


Author(s):  
V. Dharmalingam ◽  
P. Arockia Sahayaraj ◽  
A. John Amalraj ◽  
R. Shobana ◽  
R. Mohan

The goal of studying corrosion process is to find means of minimizing corrosion or prevent it from occurring. The use of inhibitors is one of the most popular methods for corrosion protection. A protective film has been formed on the surface of the mild steel in a neutral aqueous environment using a synergistic mixture of an eco-friendly inhibitor viz., Potassium Sodium Tartrate (SPT) along with polyacrylic acid (PAA) and Zn2+ ions. The inhibiting effect of SPT, PAA and Zn2+ ions have been investigated by gravimetric studies, Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The investigations revealed that SPT acts as an excellent synergist in corrosion inhibition. Optimum concentrations of all the three components of the ternary formulation are established by gravimetric studies. Potentiodynamic polarization studies inferred that this mixture functions as a cathodic inhibitor. EIS studies of the metal/solution interface indicated that the surface film is highly protective against the corrosion of mild steel. Surface characterization techniques (FTIR, SEM, AFM) are also used to ascertain the nature of the protective film. The mechanical aspect of corrosion inhibition is proposed.


2013 ◽  
Vol 685 ◽  
pp. 277-282
Author(s):  
Ahmed H. El-Shazly ◽  
H.A. Al-Turaif

This work investigates the possibility of using polypyrrole (PPy) coating for improving the corrosion resistance of rotating cylinder subjected to saline solution. Galvanostatic technique was used for layer formation under different conditions of current density, pyrrole monomer concentration, sodium tartrate concentration and solution pH. The potentiodynamic technique was used for examination of PPy coated steel in corrosive medium composed of 3.5%NaCl under different rotating speed ranging from 200 to 1000 rpm. The formed PPy layer was investigated for its corrosion resistance using 3.5% NaCl solution under different rotational speed using the potentiodynamic technique. The preliminary results showed that coating steel with polypyrrole layer under different rotational speed can improve its corrosion resistance by a factor ranging from 1.2 to 1.88 depending on the operating conditions


Sign in / Sign up

Export Citation Format

Share Document