Numerical simulation of the failure process for an experimental sample with a concentrator under plane bending conditions

2010 ◽  
Vol 39 (6) ◽  
pp. 549-553
Author(s):  
S. A. Kapustin ◽  
V. A. Gorokhov ◽  
Yu. A. Churilov
Keyword(s):  
Numerical Simulation ◽  
Failure Process ◽  
Experimental Sample ◽  
Plane Bending

Damage analysis and numerical simulation for failure process of a reinforced concrete arch structure

2005 ◽  
Vol 83 (31-32) ◽  
pp. 2609-2631 ◽  
Author(s):  
X.S. Tang ◽  
J.R. Zhang ◽  
C.X. Li ◽  
F.H. Xu ◽  
J. Pan
Keyword(s):  
Numerical Simulation ◽  
Reinforced Concrete ◽  
Failure Process ◽  
Damage Analysis ◽  
Arch Structure

Numerical Simulation of Ring-Shape Rock Failure under Compressive Loading

2011 ◽  
Vol 378-379 ◽  
pp. 15-18
Author(s):  
Yong Bin Zhang ◽  
Zheng Zhao Liang ◽  
Shi Bin Tang ◽  
Jing Hui Jia
Keyword(s):  
Numerical Simulation ◽  
Fracture Process ◽  
Failure Modes ◽  
Failure Process ◽  
Compressive Loading ◽  
Orientation Angle ◽  
Crack Orientation ◽  
Ring Specimen ◽  
Ring Shape ◽  
Good Agreement

In this paper, a ring shaped numerical specimen is used to studying the failure process in brittle materials. The ring specimen is subjected to a compressive diametral load and contains two angled central cracks. Numerical modeling in this study is performed. It is shown that the obtained numerical results are in a very good agreement with the experiments. Effect of the crack orientation angle on the failure modes and loading-displace responses is discussed. In the range of 0°~40°, the fracture paths are curvilinear forms starting from the tip of pre-existing cracks and grow towards the loading points. For the crack orientation angle 90°, vertical fractures will split the specimen and the horizontal cracks do not influence the fracture process.

scholarly journals Energy Evolution Law of Marble Failure Process Under Different Confining Pressures Based on Particle Discrete Element Method

2021 ◽  
Vol 8 ◽  
Author(s):  
Yan-Shuang Yang ◽  
Wei Cheng ◽  
Zhan-Rong Zhang ◽  
Hao-Yuan Tian ◽  
Kai-Yue Li ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Energy Dissipation ◽  
Axial Strain ◽  
Triaxial Compression ◽  
Failure Process ◽  
Rock Failure ◽  
Biaxial Compression ◽  
Energy Evolution ◽  
Confining Pressures ◽  
Energy Dissipated

The energy dissipation usually occurs during rock failure, which can demonstrate the meso failure process of rock in a relatively accurate way. Based on the results of conventional triaxial compression experiments on the Jinping marble, a numerical biaxial compression model was established by PFC2D to observe the development of the micro-cracks and energy evolution during the test, and then the laws of crack propagation, energy dissipation and damage evolution were analyzed. The numerical simulation results indicate that both the crack number and the total energy dissipated during the loading process increase with confining pressures, which is basically consistent with the experiment results. Two damage variables were presented in terms of the density from other researchers’ results and energy dissipation from numerical simulation, respectively. The energy-based damage variable varies with axial strain in the shape of “S,” and approaches one more closely than that based on density at the final failure period. The research in the rock failure from the perspective of energy may further understand the mechanical behavior of rocks.

Numerical Simulation on Failure Process of Internally Pressured Cylindrical Shell Subjected to Wedge Impact

2006 ◽  
Vol 324-325 ◽  
pp. 523-526 ◽  
Author(s):  
Gang Chen ◽  
Qing Ping Zhang ◽  
Zhong Fu Chen ◽  
Si Zhong Li ◽  
Yu Ze Chen
Keyword(s):  
Numerical Simulation ◽  
Cylindrical Shell ◽  
Experimental Observation ◽  
Impact Loading ◽  
Cylindrical Shells ◽  
Failure Process ◽  
Dynamic Failure ◽  
Local Impact ◽  
Wedge Impact ◽  
Numeral Simulation

Cylindrical shell is a kind of common used structure in engineering. Interest in the response of cylindrical shells to local impact loading has increased over the last few years. A structure always endures working load more or less. For a cylindrical shell, the working load commonly is internally pressure. In this paper, a numeral simulation of wedge block impact internally Pressured cylindrical shell was carried out. The dynamic failure process of the structure was obtained. The consistency between experimental observation and numerical simulation is satisfactory.

scholarly journals Numerical Simulation Analysis of NPR Anchorage Monitoring of Bedding Rock Landslide in Open-Pit Mine

2020 ◽  
Vol 2020 ◽  
pp. 1-17
Author(s):  
Kai Zhang ◽  
Xiaojie Yang ◽  
Xuebin Cui ◽  
Yong Wang ◽  
Zhigang Tao
Keyword(s):  
Numerical Simulation ◽  
Early Warning ◽  
Simulation Analysis ◽  
Failure Process ◽  
Open Pit Mine ◽  
Open Pit ◽  
Stress Monitoring ◽  
Anchor Cable ◽  
Whole Process ◽  
Rock Landslide

Nanfen open-pit iron mine is the largest single open-pit mine in Asia. Because of the lag of the extension project, the section has slowly spread in the shape of “V,” and disasters such as landslides occur frequently. In this study, first, the NPR anchor cable monitoring, which shows supernormal mechanical characteristics and can realize the monitoring and early warning target for the whole landslide process and early warning curve of bedding rock “2016-1101 landslide” in the lower wall of Nanfen open-pit mine, was analyzed, revealing the failure process of the bedding rock landslide and the force evolution characteristics of the NPR anchor cable. Then, based on the Fish language in FLAC3D and 3DEC software, the mechanical model of the NPR anchor cable was constructed, and numerical simulation was performed on the whole process of “16-1101 landslide” induced by accumulation of old landslide body. The results of this study indicate that the stress monitoring curves and failure characteristics of the NPR anchor cables in the whole process of landslide by the two numerical simulation methods are basically consistent with the field measurement results, providing a theoretical and practical basis for the mechanistic analysis and numerical simulation of other similar slopes.

scholarly journals Numerical Simulation of Rock Failure Process with a 3D Grain-Based Rock Model

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Zengwei Zhang ◽  
Fan Chen ◽  
Chao Zhang ◽  
Chao Wang ◽  
Tuo Wang ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Mechanical Characteristics ◽  
Failure Process ◽  
Wellbore Stability ◽  
Rock Excavation ◽  
Rock Failure Process ◽  
Rock Model ◽  
Walled Cylinder

A grain-based rock model was developed and applied to study mechanical characteristics and failure micromechanics in thick-walled cylinder and wellbore stability tests. The rock is represented as an assembly of tetrahedral blocks with bonded contacts. Material heterogeneity is modeled by varying the tensile strength at the block contacts. This grain-based rock model differs from previous disk/sphere particle-based rock models in its ability to represent a zero (or very low) initial porosity condition, as well as highly interlocked irregular block shapes that provide resistance to movement even after contact breakage. As a result, this model can reach higher uniaxial compressive strength to tensile strength ratios and larger friction coefficients than the disk/sphere particle-based rock model. The model captured the rock fragmentation process near the wellbore due to buckling and spalling. Thin fragments of rock similar to onion skins were produced, as observed in laboratory breakout experiments. The results suggest that this approach may be well suited to study the rock disaggregation process and other geomechanical problems in the rock excavation.

Analysis of Numerical Simulation for Seismic Performance of MMCs

2011 ◽  
Vol 284-286 ◽  
pp. 3-10
Author(s):  
Hui Ting Gao ◽  
Li Na Xu ◽  
Song He Meng ◽  
Zhan Yi Cao
Keyword(s):  
Numerical Simulation ◽  
Seismic Performance ◽  
Failure Process ◽  
Earthquake Damage

Earthquake damage of MMCs simulated by computer is a very valuable area. It can do large, prototype, repeated and destructive simulation. The failure process of the material and structural can be analyzed .The process of numerical simulation of Fe / Zn MMCs is first described in this paper.

Sign in / Sign up

Export Citation Format

Share Document