Influence of phase composition of austenitic-martensitic trip-steel VNS9-Sh on characteristics of dry sliding friction in tribocontact with steel ShKh 15

2021 ◽  
pp. 20-27
Author(s):  
G.S. Seval’nev ◽  
◽  
T.G. Seval’neva ◽  
A.G. Kolmakov ◽  
K.V. Dulnev ◽  
...  
Keyword(s):  
Trip Steel ◽  
Sliding Friction ◽  
Martensite Phase ◽  
Dry Sliding ◽  
Phase Content ◽  
Steel Shkh15 ◽  
Steel Shkh ◽  
Dry Sliding Friction ◽  
Tribomechanical Properties ◽  
110G13l Steel

The influence of content of the martensite phase that is from 0 to 50% (vol.) on hardness and tribomechanical properties of trip-steel VNS9-Sh (ВНС9-Ш) under conditions of dry sliding friction on steel ShKh15 (ШХ15) (counterbody) has been investigated. It was found out that the best combination of hardness and wear resistance was possessed by steel with martensite phase content ≈32% (vol.). It is shown that with comparable hardness and tribomechanical properties, VNS9-Sh steel is more than twice as strong as 110G13L steel (110Г13Л).

Multiple Reflow Influence over the FeCoCrAlTiCuNiMo Coating Obtained by Plasma Metallization on its Wear Resistance under Dry Friction

2021 ◽  
Vol 410 ◽  
pp. 475-481
Author(s):  
Anvar M. Kadyrmetov ◽  
Dmitri A. Popov ◽  
Yevgeny V. Snyatkov
Keyword(s):  
Wear Resistance ◽  
Dry Friction ◽  
Sliding Friction ◽  
Plasma Jet ◽  
Dry Sliding ◽  
Research Results ◽  
Open Atmosphere ◽  
Multicomponent Coating ◽  
Dry Sliding Friction

The article presents the research results of the plasma jet multiple reflow effect over the multicomponent coating FeCoCrAlTiCuNiMo, obtained by plasma metallization in an open atmosphere, on its wear resistance under dry sliding friction. The research results indirectly confirm the influence of the coating entropy over the wear resistance increasing along of the reflow number growth.

Surface Topography Characterization in Steel Running-in Process of Dry Sliding Friction

2013 ◽  
Vol 278-280 ◽  
pp. 414-417 ◽  
Author(s):  
Geng Pei Zhang ◽  
Xiao Jun Liu ◽  
Wen Long Lu
Keyword(s):  
Surface Topography ◽  
Sliding Friction ◽  
Control Surface ◽  
Significant Feature ◽  
Dry Sliding ◽  
Wear Process ◽  
Machine System ◽  
Dry Sliding Friction ◽  
Performance Surface

Running-in is an important and inevitable wear process for machine system, and it plays an indispensable role in extending service life and improving operating performance. Surface topography appears as a significant feature of friction pairs. Therefore, study on modification of surface topography in running-in is crucial to control surface quality and then achieve improvement of machine system. In this paper, to understand the evolution of surface topography in running-in process, steel dry sliding running-in experiments were conducted, and surface topographies in running-in were evaluated with the areal surface evaluation parameters. The results reveal that surface topography evaluation could provide valuable information about wear status of steel running-in process of dry sliding friction, amplitude parameters, area and volume parameters, and hybrid parameters play different and important roles in characterization of surface topography modification in running-in.

scholarly journals Suppression of wear in dry sliding friction induced by negative thermal expansion

2020 ◽  
Vol 102 (4) ◽  
Author(s):  
Aleksandr S. Grigoriev ◽  
Evgeny V. Shilko ◽  
Andrey I. Dmitriev ◽  
Sergey Yu. Tarasov
Keyword(s):  
Thermal Expansion ◽  
Sliding Friction ◽  
Negative Thermal Expansion ◽  
Dry Sliding ◽  
Dry Sliding Friction
Sign in / Sign up

Export Citation Format

Share Document