Performance and Fabrication of Organic Field Effect Transistor with Active Layer Prepared by Soluble Pentacene

2009 ◽  
Vol 52 (3) ◽  
pp. 135-137
Author(s):  
Masakazu OHNISHI ◽  
Shizuyasu OCHIAI ◽  
Kenzo KOJIMA ◽  
Teruyoshi MIZUTANI
2017 ◽  
Vol 47 (3) ◽  
pp. 2184-2191 ◽  
Author(s):  
Nur Adilah Roslan ◽  
Shahino Mah Abdullah ◽  
Muhammad Zharfan Mohd Halizan ◽  
Tahani M. Bawazeer ◽  
Nourah Alsenany ◽  
...  

2021 ◽  
Vol 8 (5) ◽  
pp. 823-835
Author(s):  
Thomas Debesay ◽  
◽  
Sam-Shajing Sun ◽  
Messaoud Bahoura ◽  
◽  
...  

<abstract> <p>A dual doped regio-regular poly(3-hexylthiophene-2, 5-diyl) (P3HT) was investigated to develop a multi-functional organic field effect transistor (OFET). OFETs based on a pristine P3HT and a dual doped P3HT (P3HT:PCBM:I<sub>2</sub> blend) were fabricated to study the impact of doping on the electrical properties of the samples, and to examine the mechanism through which it amplified the output performance of the doped OFETs. A series of experimental techniques such as device electrical characterization, active layer surface analysis, and photon absorptivity measurements were conducted to quantitatively characterize the principal parameters that are susceptible to change as a result of doping. Topographic mapping revealed the expected doping-induced improvements in surface morphology, which could be associated with the ability of iodine to improve interdigitation between adjacent P3HT chains. Similarly, absorption spectra showed a 3 nm red-shift of the light absorbance spectrum of the doped samples compared to the undoped samples. The electrical conductivity of the samples was also examined at various conditions of temperature and light intensity, and the values obtained from the doped sample were approximately one order of magnitude higher compared to those of the undoped sample at room temperature, which explains the reason behind the higher output current drawn from the doped device compared to that of the undoped OFET. The explanation for this is two-fold, both PCBM and iodine promote the generation of free charge carriers, which increases the electrical conductivity of the active layer; and in addition to that, the improved P3HT main-chain interdigitation brought about by the introduction of iodine results in an increase in charge-carrier mobility, which also results in higher electrical conductivity. The findings of this study offers valuable information that could be instrumental in further advancing the future organic semiconductors based studies.</p> </abstract>


2008 ◽  
Vol 111 (1) ◽  
pp. 1-4 ◽  
Author(s):  
N. Tjitra Salim ◽  
K.C. Aw ◽  
Hui Peng ◽  
Lijuan Zhang ◽  
J. Travas-Sejdic ◽  
...  

2010 ◽  
Vol 10 (3) ◽  
pp. 2161-2163 ◽  
Author(s):  
Na Jing ◽  
Jiachun Deng ◽  
Liying Yang ◽  
Kai Zhao ◽  
Zhongqiang Wang ◽  
...  

2015 ◽  
Vol 3 (20) ◽  
pp. 5220-5225 ◽  
Author(s):  
Mingdong Yi ◽  
Ming Xie ◽  
Yaqing Shao ◽  
Wen Li ◽  
Haifeng Ling ◽  
...  

We demonstrated organic field-effect transistor (OFET) ambipolar memory devices based on unipolar OFETs by utilizing light illumination.


2014 ◽  
Vol 2 (23) ◽  
pp. 4539-4544 ◽  
Author(s):  
Yebyeol Kim ◽  
Tae Kyu An ◽  
Jiye Kim ◽  
Jihun Hwang ◽  
Seonuk Park ◽  
...  

The receptor material (OA-GO)/polymeric semiconductor (F8T2) structure is newly introduced to active layer of OFET gas sensors and demonstrated to have better sensing ability than a comparable device with a polymer-only active layer.


Sign in / Sign up

Export Citation Format

Share Document