ALUMINUM 2117

Alloy Digest ◽  
1979 ◽  
Vol 28 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Solution Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Good Combination ◽  
General Corrosion ◽  
Temperature Performance ◽  
Corrosive Environments

Abstract ALUMINUM 2117 is an aluminum alloy that ages naturally after solution treatment. It has a good combination of strength, ductility and formability. It has fair resistance to general corrosion but needs protection in corrosive environments. Aluminum 2117 can be used in service up to 575 F and is used widely for high-strength rivets. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-158. Producer or source: Various aluminum companies. Originally published September 1966, revised November 1979.

ALUMINUM 7002

Alloy Digest ◽  
1966 ◽  
Vol 15 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Aluminum Company

Abstract Aluminum 7002 is a heat treatable, weldable, high strength aluminum alloy recommended for space equipment and cryogenic applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-159. Producer or source: Aluminum Company of America.

ALUMINUM 5086

Alloy Digest ◽  
1981 ◽  
Vol 30 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Pipe Lines

Abstract ALUMINUM 5086 is a non-heat-treatable aluminum alloy. It is characterized by high strength, excellent weldability and excellent resistance to corrosion. Among its many uses are structural towers, welded boat hulls, tanks and pipe lines. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-28. Producer or source: Aluminum alloy mills. Originally published July 1955, revised February 1960,revised December 1981.

ALUMINUM 5083

Alloy Digest ◽  
1978 ◽  
Vol 27 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
High Temperature ◽  
High Strength ◽  
Heat Treating ◽  
Storage Tanks ◽  
Temperature Performance ◽  
Aluminum 5083 ◽  
Wrought Aluminum

Abstract ALUMINUM 5083 is a non-heat-treatable wrought aluminum alloy possessing high strength, excellent welding characteristics and excellent resistance to corrosion. Among its many applications are structural towers, mobile cranes and chemical storage tanks. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-33. Producer or source: Various aluminum companies. Originally published October 1955, revised October 1978.

KO-1 ALLOY

Alloy Digest ◽  
1970 ◽  
Vol 19 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
High Energy ◽  
Temperature Performance ◽  
High Energy Absorption

Abstract KO-1 ALLOY is an aluminum alloy for general casting purposes. It is used where high strength at room or elevated temperatures and high energy absorption are important. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-198. Producer or source: Electronic Specialties Company.

AMBRALOY 928

Alloy Digest ◽  
1958 ◽  
Vol 7 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
General Corrosion ◽  
Copper Aluminum

Abstract AMBRALOY-928 is a copper-aluminum alloy having high strength, hardness and excellent resistance to general corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: Cu-69. Producer or source: American Brass Company.

ALUMINUM A357

Alloy Digest ◽  
1967 ◽  
Vol 16 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Permanent Mold ◽  
Aluminum Casting ◽  
Aluminum Casting Alloy ◽  
Temperature Performance ◽  
Aluminum Company

Abstract Aluminum A357 is a high strength, pressure tight sand and permanent mold aluminum casting alloy. It is age-hardenable. It is recommended for cast gear cases, cylinder heads, transmission cases and strong structural castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-163. Producer or source: Aluminum Company of America.

COPPER ALLOY No. 260

Alloy Digest ◽  
1971 ◽  
Vol 20 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract COPPER ALLOY No. 260 is a 70% copper-30% zinc alloy having high strength, excellent ductility, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-241. Producer or source: Brass mills.

ALUMINUM 5056

Alloy Digest ◽  
1979 ◽  
Vol 28 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Strength ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Temperature Performance ◽  
Wrought Aluminum ◽  
Strength And Ductility ◽  
Cold Workability ◽  
Manganese Chromium

Abstract ALUMINUM 5056 is a non-heat-treatable wrought aluminum-magnesium-manganese-chromium alloy possessing high strength and ductility along with good hot and cold workability. It is recommended for such applications as rivets and screen wire. It may be used with or without cladding. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-126. Producer or source: Various aluminum companies. Originally published June 1963, revised February 1979.

IMPALCO 770

Alloy Digest ◽  
1962 ◽  
Vol 11 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
High Strength Aluminum Alloy ◽  
Structural Parts

Abstract IMPALCO 770 is a heat treatable, high strength aluminum alloy available in bar form for machining applications. It is recommended for highly stressed structural parts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-120. Producer or source: Imperial Aluminium Company Ltd.

UNS A96061

Alloy Digest ◽  
1988 ◽  
Vol 37 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance

Abstract UNS A96061 is a wrought precipitation-hardenable aluminum alloy having excellent resistance to corrosion and good mechanical properties. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-292. Producer or source: Various aluminum companies.

Sign in / Sign up

Export Citation Format

Share Document