ALCOA 6063

Alloy Digest ◽  
2005 ◽  
Vol 54 (4) ◽  
Keyword(s):  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
Heat Treating ◽  
High Quality ◽  
Quality Surface ◽  
High Quality Surface

Abstract Alloy 6063, one of the most popular alloys in the 6000 series, provides good extrudability and a high-quality surface finish. Alloy 6063 is used in a variety of architectural applications. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on heat treating, machining, and surface treatment. Filing Code: AL-392. Producer or source: Alcoa Engineered Products.

KAISER ALUMINUM ALLOY 2011

Alloy Digest ◽  
1998 ◽  
Vol 47 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Screw Machine

Abstract Kaiser Aluminum alloy 2011 is one of the most popular screw machine stock alloys available. Tennalum, a division of Kaiser Aluminum, produces alloy 2011 in the T3 temper as Microchip II, which offers excellent machinability and surface finish. The chips from Tennalum’s Microchip II (T3 temper only) are known for being small in size. Alloy 2011 is typically used in connectors and fittings, brake pistons, computer parts, knobs, and meter shafts. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-352. Producer or source: Kaiser Aluminum Corporation.

WIELAND-Z30

Alloy Digest ◽  
2005 ◽  
Vol 54 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Cold Working ◽  
Heat Treating ◽  
Good Strength ◽  
Metalworking Industry

Abstract Wieland-Z30 has good hot and cold working properties and good strength. The alloy is easily machined and used often in the metalworking industry. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-735. Producer or source: Wieland Metals Inc., Wieland-Werke AG.

MEEHANITE GF-20

Alloy Digest ◽  
1973 ◽  
Vol 22 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Gray Cast Iron ◽  
Heat Treating ◽  
Gray Cast

Abstract MEEHANITE GF-20 is a gray cast iron designed principally for high machinability and is used where strength is not an important factor. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: CI-39. Producer or source: Meehanite Metal Corporation.

KAISER ALUMINUM ALLOY 6033

Alloy Digest ◽  
2003 ◽  
Vol 52 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Alloy 6061

Abstract Kaiser Aluminum alloy 6033 has improved machinability over alloy 6061 with an addition of bismuth. The alloy also has a good anodizing response and higher strength than alloy 6061. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-386. Producer or source: Tennalum, A Division of Kaiser Aluminum.

ALUMINUM 852.0

Alloy Digest ◽  
1983 ◽  
Vol 32 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Permanent Mold ◽  
Temperature Performance

Abstract ALUMINUM 852.0 contains higher concentrations of copper and nickel than either Aluminum 850.0 or Aluminum 851.0 alloy. The higher copper and nickel percentages and an addition of magnesium give Aluminum 852.0 higher strength and make it suitable for bearing applications requiring improved resistance to higher operating stresses (loads). Aluminum 852.0 is used for the production of castings by the sand and permanent-mold processes. It is normally supplied and used in the T5 temper. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Al-248. Producer or source: Various aluminum companies.

COPPER ALLOY No. C43400

Alloy Digest ◽  
1984 ◽  
Vol 33 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Ductility ◽  
Copper Zinc ◽  
Cold Worked

Abstract Copper Alloy No. C43400 is a copper-zinc-tin alloy that can be cold worked readily by all conventional processes. It has moderate strength and good ductility. This alloy is used typically for electrical switch parts, contacts and relay springs. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-488. Producer or source: Brass mills.

KAISER ALUMINUM ALLOY 6262

Alloy Digest ◽  
1999 ◽  
Vol 48 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Automotive Parts

Abstract Kaiser Aluminum alloy 6262 (Tennalum alloy 6262) is an Al-Mg-Si-Cu-Cr-Pb-Bi alloy with characteristic good machinability and corrosion resistance and a good acceptance of coatings (anodize response). It is typically used in automotive parts, fittings, building hardware, and valve components. This datasheet provides information on composition, physical properties, tensile properties, and shear strength as well as fatigue. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-361. Producer or source: Tennalum, A Division of Kaiser Aluminum.

MAGNESIUM TA54A

Alloy Digest ◽  
1960 ◽  
Vol 9 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Magnesium Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Aluminum Company ◽  
Hammer Forging

Abstract MAGNESIUM ALLOY-TA54A is a general purpose hammer-forging alloy having intermediate strength. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-44. Producer or source: Aluminum Company of America.

DURA-BAR 80-55-06

Alloy Digest ◽  
2020 ◽  
Vol 69 (7) ◽  
Keyword(s):  
Wear Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Surface Finish ◽  
Ductile Iron ◽  
Heat Treating ◽  
Continuous Cast ◽  
Cast Products

Abstract Dura-Bar 80-55-06 is a ferritic-pearlitic ductile iron that is used for continuous cast products. It offers higher strength and wear resistance when compared to Dura-Bar 65-45-12, while still possessing good machinability and surface finish. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on heat treating and machining. Filing Code: CI-71. Producer or source: Charter Dura-Bar, Inc.

MST 8Mn

Alloy Digest ◽  
1958 ◽  
Vol 7 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Sheet Alloy ◽  
Temperature Performance

Abstract MST 8Mn is a heat treatable sheet alloy having good formability and recommended for use at moderately elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-17. Producer or source: Mallory-Sharon Titanium Corporation.

Sign in / Sign up

Export Citation Format

Share Document