CRUCIBLE WF11

Alloy Digest ◽  
1962 ◽  
Vol 11 (7) ◽  
Keyword(s):  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Steel Company ◽  
Annealed Condition ◽  
Subsequent Aging ◽  
Temperature Performance ◽  
Crucible Steel ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract CRUCIBLE WF11 is a ductile cobalt-base alloy having exceptional mechanical properties at temperatures up to 1800 F in the fully annealed condition without subsequent aging. It is recommended for high temperature service. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-33. Producer or source: Crucible Steel Company of America.

HAYNES ALLOY No. 25

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
High Temperature ◽  
Room Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Annealed Condition ◽  
Subsequent Aging ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base ◽  
Haynes Alloy

Abstract HAYNES# Alloy No. 25 is a wrought, high temperature, cobalt-base alloy that has exceptional mechanical properties at temperatures up to 1800 deg. F. in the fully annealed condition without subsequent aging. It is easy to fabricate because it has excellent ductility at room temperature. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-5. Producer or source: Haynes Stellite Company. Originally published September 1953, revised December 1961.

HAYNES ALLOY No. 36

Alloy Digest ◽  
1959 ◽  
Vol 8 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Jet Engine ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base ◽  
Haynes Alloy

Abstract HAYNES Alloy No. 36 is a cobalt-base alloy having excellent strength at temperatures up to 1800 deg. F. It is the cast modification of wrought HAYNES Alloy No. 25 and has been used successfully in jet engine blading and nozzle vanes. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-17. Producer or source: Haynes Stellite Company.

CARPENTER L-605 ALLOY

Alloy Digest ◽  
1987 ◽  
Vol 36 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base ◽  
Oxidation And Corrosion

Abstract CARPENTER L-605 alloy is a nonmagnetic cobalt-base alloy that has good oxidation and corrosion resistance and high strength at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-81. Producer or source: Carpenter.

NICKELVAC L-605

Alloy Digest ◽  
1967 ◽  
Vol 16 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Temperature Range ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract NICKELVAC L-605 is a double vacuum melted, cobalt-base alloy for high temperature applications. It is recommended for highly stressed parts operating in the temperature range of 1700 to 2000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-53. Producer or source: Allvac Metals Company, A Teledyne Company.

WALLEX No. 6

Alloy Digest ◽  
1964 ◽  
Vol 13 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base ◽  
Corrosion And Oxidation

Abstract Wallex No. 6 is a cobalt-base alloy recommended for hard facing parts to resist impact, corrosion and oxidation at high temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness, and deformation. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Co-36. Producer or source: Wall Colmonoy Corporation.

DELORO STELLITE-4

Alloy Digest ◽  
1969 ◽  
Vol 18 (1) ◽  
Keyword(s):  
High Temperature ◽  
Base Alloy ◽  
Hot Extrusion ◽  
Heat Treating ◽  
High Wear Resistance ◽  
High Temperature Strength ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract DELORO STELLITE 4 is a cobalt-base alloy having high wear resistance, good high temperature strength. It is a machinable casting alloy recommended for hot extrusion and pressing dies, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating and machining. Filing Code: Co-57. Producer or source: Deloro Stellite Ltd.

MAR-M Alloy 509

Alloy Digest ◽  
1967 ◽  
Vol 16 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Resistance To Oxidation ◽  
Cobalt Base Alloy ◽  
Industrial Gas Turbine ◽  
Cobalt Base

Abstract MAR-M Alloy 509 is a vacuum melted, cobalt-base alloy having high strength, low creep rates, and resistance to oxidation and thermal shock. It is recommended for aircraft and industrial gas turbine applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Co-54. Producer or source: Martin Metals Division, Martin Marietta Corporation.

G-E ALLOY J-1570

Alloy Digest ◽  
1957 ◽  
Vol 6 (5) ◽  
Keyword(s):  
High Temperature ◽  
Fatigue Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Age Hardening ◽  
Temperature Performance ◽  
Cobalt Base Alloy ◽  
Cobalt Base

Abstract G.E. ALLOY J-1570 is a cobalt-base alloy having good forgeability and superior fatigue strength at 1500 deg. F. It is an age-hardening alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Co-11. Producer or source: Metallurgical Products Department, GE.

CONICRO 4023 W

Alloy Digest ◽  
1996 ◽  
Vol 45 (11) ◽  
Keyword(s):  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Tungsten Content ◽  
Temperature Performance ◽  
Temperature Heat ◽  
Cobalt Base Alloy ◽  
High Tungsten Content ◽  
Cobalt Base ◽  
Scaling Resistance

Abstract Conicro 4023 W is a high-temperature, heat-resistant, cobalt-base alloy with equal contents of nickel and chromium, a high tungsten content, and a controlled lanthanum addition. The alloy has excellent mechanincal properties and scaling resistance to 1150 deg C (2100 deg F). This datasheet provides information on composition, physical properties, and elasticity as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CO-102. Producer or source: VDM Technologies Corporation.

JESSOP SAVILLE G.32

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
G 32 ◽  
Temperature Performance ◽  
High Oxidation ◽  
Cobalt Base Alloy ◽  
Cobalt Base ◽  
Oxidation And Corrosion

Abstract JESSOP-SAVILLE G.32 is a cobalt-base alloy having high oxidation and corrosion resistance. It is recommended for high temperature applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Co-21. Producer or source: Wm. Jessop & Sons Ltd. Originally published June 1960, revised June 1963.

Sign in / Sign up

Export Citation Format

Share Document