ZYMAXX

Alloy Digest ◽  
1991 ◽  
Vol 40 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Creep Resistance ◽  
Chemical Processing ◽  
Industrial Equipment ◽  
Automotive Applications ◽  
Adverse Conditions ◽  
Chemical Inertness ◽  
Wide Range

Abstract ZYMAXX provides outstanding compressive creep resistance, toughness and chemical inertness at high temperatures and pressures and under adverse conditions. They have a wide range of uses beyond chemical processing, including aerospace and automotive applications, general industrial equipment, home appliances, farm and construction equipment. This datasheet provides information on physical properties, hardness, tensile properties, and compressive strength as well as fracture toughness and creep. It also includes information on corrosion resistance. Filing Code: Cp-18. Producer or source: E. I. Dupont de Nemours & Company Inc..

ALLEGHENY ALMAR-362

Alloy Digest ◽  
1970 ◽  
Vol 19 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Martensitic Stainless Steel ◽  
High Strength ◽  
Heat Treating ◽  
Chemical Processing ◽  
Processing Industry ◽  
Good Corrosion Resistance ◽  
Pneumatic Equipment

Abstract ALLEGHENY ALMAR-362 is an age-hardenable martensitic stainless steel recommended for applications requiring high strength and good corrosion resistance, such as aircraft and missile structures, hydraulic and pneumatic equipment components, and in the chemical processing industry. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-234. Producer or source: Allegheny Ludlum Corporation.

BUNTING ALLOY 935

Alloy Digest ◽  
1978 ◽  
Vol 27 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Load Capacity ◽  
Heat Treating ◽  
Special Equipment ◽  
Friction Characteristics ◽  
Wide Range

Abstract BUNTING Alloy 935 is a cast bearing and bushing bronze. It has a good load capacity and excellent anti-friction characteristics. It is suitable for operating temperatures up to 450 F and has a wide range of applications in automotive, industrial and special equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-350. Producer or source: NL Industries Inc., Bearing Division.

FEDERALOY F-1

Alloy Digest ◽  
1954 ◽  
Vol 3 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Performance

Abstract Federaloy F-1 is a copper tin-zinc bearing bronze whose strength suits it for applications where loads are heavy. It should be used only where lubrication is exceptionally good or motion is of a rocking nature. It is also a good gear bronze. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness, creep, and deformation. It also includes information on high temperature performance and corrosion resistance as well as casting, machining, and joining. Filing Code: Cu-19. Producer or source: Federal-Mogul Corporation.

COPPER ALLOY No. C93500

Alloy Digest ◽  
1982 ◽  
Vol 31 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C93500 is a cast bronze containing nominally 9% lead and 5% tin. It has excellent machinability, low strength and good resistance to corrosion. It is used for corrosion-resistant castings, small bearings and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-439. Producer or source: Copper alloy foundries.

SAE 1020

Alloy Digest ◽  
1987 ◽  
Vol 36 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Temperature Performance ◽  
Wide Range ◽  
Cold Worked

Abstract SAE 1020 is a low-carbon steel combining good machinability, workability and weldability. It is carburized for use in case-hardened components and it is used for a wide range of applications in the hot-worked, cold-worked, normalized or quenched-and-tempered conditions. Its many uses include bolts, rods, plate applications, machinery components, case-hardened parts, spinning tools and trimming dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: CS-113. Producer or source: Carbon steel mills.

BUNTING ALLOY 907

Alloy Digest ◽  
1977 ◽  
Vol 26 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Tin Bronze ◽  
Standard Alloy

Abstract BUNTING Alloy 907 is a cast copper-tin alloy (tin bronze) recommended for severe service requirements. It is used widely for bearings and gears. It is a standard alloy for the manufacture of cast gear blanks and has long been known as Phosphor Gear Bronze. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-328. Producer or source: NL Industries Inc., Bearing Division.

LUMEN ALLOY 9

Alloy Digest ◽  
1957 ◽  
Vol 6 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Sea Water ◽  
Heat Treating

Abstract UMEN ALLOY 9 is a manganese bronze having excellent combination of strength and corrosion resistance in fresh and sea water. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-57. Producer or source: Lumen Bearing Company.

WALLEX No. 40

Alloy Digest ◽  
1976 ◽  
Vol 25 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Powder Metal ◽  
Temperature Performance ◽  
Red Hardness ◽  
Cobalt Base

Abstract WALLEX No. 40 is a self-fluxing, cobalt-base hard-surfacing alloy with excellent resistance to a combination of corrosion and abrasion and relatively good impact properties. It has excellent red hardness and weldability. It is supplied only as atomized powder for application with Wall Colmonoy's SPRAYWELD and FUSEWELD processes. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and powder metal forms. Filing Code: Co-74. Producer or source: Wall Colmonoy Corporation.

AMDRY 761

Alloy Digest ◽  
1974 ◽  
Vol 23 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Powder Metal ◽  
Maximum Resistance ◽  
Temperature Performance ◽  
Nickel Base

Abstract AMDRY 761 is a nickel-base alloy designed to provide maximum resistance to combinations of abrasion, corrosion, heat and oxidation. It is deposited by spraying on the desired surface at a thickness usually limited to a maximum of 0.080 inch. The data pertain to the deposit after fusing. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and powder metal forms. Filing Code: Ni-200. Producer or source: Alloy Metals Inc..

COPPER ALLOY No. C94300

Alloy Digest ◽  
1984 ◽  
Vol 33 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Copper Alloy ◽  
High Speed ◽  
Heat Treating ◽  
Lead Alloy ◽  
Good Resistance ◽  
Tin Bronze ◽  
Strength Medium

Abstract Copper Alloy No. C94300 is a cast copper-tin-lead alloy (bronze). It is characterized by low hardness and strength, medium ductility, excellent machinability and good resistance to corrosion. Commercial names formerly used (but not recommended) are (1) Ingot No. 322, (2) Soft Bronze, (3) High-Leaded Tin Bronze and (4) 70-5-25. This alloy is recommended highly for high-speed bearings at light loads. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-470. Producer or source: Copper alloy foundries.

Sign in / Sign up

Export Citation Format

Share Document