COPPER ALLOY No. 878

Alloy Digest ◽  
1979 ◽  
Vol 28 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Copper Alloy ◽  
Die Casting ◽  
Heat Treating ◽  
Casting Alloys ◽  
Copper Zinc ◽  
Die Castings ◽  
Very High

Abstract Copper Alloy No. 878 is a copper-zinc-silicon alloy for die castings. Among the brass die-casting alloys, it has the highest strength, hardness and wear resistance; however, it is the most difficult to machine. It is used where very high requirements must be met for strength and wear resistance. Its many applications include tools, pump impellers, gears and marine hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-386. Producer or source: Copper alloy producers.

COPPER ALLOY No. 858

Alloy Digest ◽  
1978 ◽  
Vol 27 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Copper Alloy ◽  
Low Cost ◽  
Heat Treating ◽  
General Purpose ◽  
Brass Alloy ◽  
Copper Zinc ◽  
Die Castings

Abstract Copper Alloy No. 858 is a copper-zinc-tin-lead (yellow brass) alloy for die castings. It is a low-cost, general-purpose alloy with good machinability and soldering characteristics. Its many uses include general and marine hardware, pump, impellers, plumbing parts and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-354. Producer or source: Copper alloy producers.

COPPER ALLOY No. 879

Alloy Digest ◽  
1977 ◽  
Vol 26 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Copper Alloy ◽  
Die Casting ◽  
Heat Treating ◽  
General Purpose ◽  
Brass Alloy ◽  
Copper Zinc ◽  
Silicon Silicon

Abstract Copper Alloy No. 879 is a copper-zinc-silicon (silicon brass) alloy for die casting. It is a general-purpose alloy with moderate strength for such applications as tools, hardware, gears and plumbing parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-335. Producer or source: Copper alloy die casters.

DI-METAL 3

Alloy Digest ◽  
1956 ◽  
Vol 5 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Base Alloy ◽  
Die Casting ◽  
Heat Treating ◽  
Casting Alloys ◽  
Fine Detail ◽  
Die Castings

Abstract DI-METAL 3 is a zinc-base alloy of high fluidity capable of producing fine detail in die castings. It is the most stable of the zinc die casting alloys, but on aging loses about 20% of its tensile strength with practically no impact drop. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Zn-3. Producer or source: Federated Metals Corporation, ASARCO Inc..

COPPER ALLOY No. 220

Alloy Digest ◽  
1972 ◽  
Vol 21 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Temperature Performance ◽  
Copper Zinc ◽  
Resistance To Stress

Abstract COPPER ALLOY No. 220, previously called Commercial Bronze, 90%, is a copper-zinc alloy having good formability and resistance to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-254. Producer or source: Brass mills.

DURCOMET 100

Alloy Digest ◽  
1993 ◽  
Vol 42 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Mechanical Strength ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Annealed Condition ◽  
Excellent Corrosion Resistance ◽  
Wide Range ◽  
Very High

Abstract Durcomet 100 is an improved version of Alloy CD-4 MCu with better corrosion and wear resistance. The alloy is used in the annealed condition and possesses excellent corrosion resistance over a wide range of corrosion environments. Mechanical strength is also very high. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: SS-540. Producer or source: Duriron Company Inc.

AZ91D and AZ91E ALLOYS

Alloy Digest ◽  
1988 ◽  
Vol 37 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Die Casting ◽  
Heat Treating ◽  
Permanent Mold ◽  
Corrosion Resistant ◽  
Chemical Company ◽  
Manganese Alloys ◽  
Die Castings ◽  
Permanent Mold Castings

Abstract AZ91D and AZ91E alloys are magnesium-aluminum-zinc-manganese alloys of closely controlled purity. Ingot is available for use in the production of improved corrosion resistant sand, permanent-mold and die castings. AZ91D is used for die casting and AZ91E for sand and permanent-mold castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Mg-73. Producer or source: The Dow Chemical Company.

COPPER ALLOY No. C86400

Alloy Digest ◽  
1985 ◽  
Vol 34 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Brass Alloy ◽  
Light Duty ◽  
Copper Zinc

Abstract Copper Alloy No. C86400 is a free-machining, low-tensile (60,000 psi), cast manganese bronze; it is also classified as high-strength yellow brass. Although it is around the low-strength end of the manganese bronzes, its tensile strength is substantially greater than that of the corresponding copper-zinc (yellow brass) alloy. Typical uses are marine fittings, valve stems, lever arms and light-duty gears. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-453. Producer or source: Copper alloy foundries. “Originally published February 1983, revised August 1985.”

COPPER ALLOY No. C44300

Alloy Digest ◽  
1987 ◽  
Vol 36 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Copper Alloy ◽  
Heat Treating ◽  
Small Addition ◽  
Good Combination ◽  
General Corrosion ◽  
Good Resistance ◽  
Copper Zinc ◽  
Strength And Ductility

Abstract Copper Alloy No. C44300 is a copper-zinc-tin alloy inhibited by arsenic; it is commonly known as inhibited admiralty metal or admiralty brass. It has a good combination of strength and ductility and good resistance to general corrosion. The small addition of arsenic (nominally 0.06%) is made to minimize the alloy's susceptibility to dezincification and stress corrosion. It is used widely for condenser, evaporator and heat-exchanger tubes and associated applications. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-526. Producer or source: Copper and copper alloy mills.

COPPER ALLOY No. 630

Alloy Digest ◽  
1967 ◽  
Vol 16 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Aluminum Bronze ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract COPPER ALLOY No. 630 is a heat treatable aluminum bronze combining wear resistance with high strength and good corrosion resistance. It is recommended for propellers, pump parts, and valves, gears, shafts and pickling equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-176. Producer or source: Ampco Metal Inc..

MUNTZ METAL

Alloy Digest ◽  
1955 ◽  
Vol 4 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Strength ◽  
Copper Zinc

Abstract MUNTZ METAL is a 60-40 copper-zinc alloy having good strength but low ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cu-25. Producer or source: Copper alloy mills.

Sign in / Sign up

Export Citation Format

Share Document