MUELLER COPPER 1220

Alloy Digest ◽  
1985 ◽  
Vol 34 (4) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cold Working ◽  
Heat Treating ◽  
Air Conditioners ◽  
Residual Phosphorus

Abstract MUELLER Copper 1220 is a deoxidized copper with high residual phosphorus (nominally 0.02%). It has rather low electrical conductivity but it is not susceptible to embrittlement by hydrogen. Its low electrical conductivity is mainly caused by the phosphorus. It has excellent cold-working characteristics and can be joined by several methods. Among its many applications are air conditioners, gas lines, heater lines, oil-burner and plumbing tubes, dairy tubes and oil lines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-495. Producer or source: Mueller Brass Company.

COPPER ALLOY No. 120

Alloy Digest ◽  
1972 ◽  
Vol 21 (12) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Residual Phosphorus ◽  
Low Level

Abstract COPPER No. 120 is a phosphorus deoxidized copper in which the residual phosphorus is maintained at a low level to acheive a good electrical conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-263. Producer or source: Copper and copper alloy mills.

SWISSMETAL C97 AND C98

Alloy Digest ◽  
2008 ◽  
Vol 57 (10) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cold Working ◽  
High Strength ◽  
Heat Treating ◽  
High Electrical Conductivity ◽  
Industrial Products

Abstract Swissmetal alloys C97 and C98 attain high strength by aging after cold working. The alloys are free machining and maintain a high electrical conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CU-759. Producer or source: Avins Industrial Products.

KME Cu-DHP

Alloy Digest ◽  
2021 ◽  
Vol 70 (8) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Corrosion Resistance ◽  
Hydrogen Embrittlement ◽  
Physical Properties ◽  
Tensile Properties ◽  
Phosphorus Content ◽  
Heat Treating ◽  
Bend Strength ◽  
Residual Phosphorus ◽  
High Phosphorus Content

Abstract KME Cu-DHP is a phosphorus-deoxidized copper that contains a minimum of 99.90% copper and high residual phosphorus. The electrical conductivity of this type of copper is relatively low on account of the high phosphorus content. KME Cu-DHP possesses very good formability and joining properties and is resistant against hydrogen embrittlement. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-923. Producer or source: KME Germany GmbH.

AURUBIS Cu-HCP

Alloy Digest ◽  
2021 ◽  
Vol 70 (1) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Phosphorus Content ◽  
Heat Treating ◽  
High Electrical Conductivity ◽  
Residual Phosphorus

Abstract Aurubis Cu-HCP is a deoxidized, oxygen-free copper with a low residual phosphorus content. It combines very good formability and joining characteristics with high electrical conductivity (98% IACS minimum). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating. Filing Code: Cu-916. Producer or source: Aurubis AG.

AURUBIS Cu-PHC

Alloy Digest ◽  
2020 ◽  
Vol 69 (12) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Phosphorus Content ◽  
Heat Treating ◽  
Residual Phosphorus

Abstract Aurubis Cu-PHC is a deoxidized, oxygen-free copper with a very low residual phosphorus content. It combines good electrical conductivity with excellent hot and cold formability and excellent joining characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: Cu-915. Producer or source: Aurubis AG.

KME Cu-DLP

Alloy Digest ◽  
2021 ◽  
Vol 70 (2) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Conductivity ◽  
Residual Phosphorus

Abstract KME Cu-DLP is a phosphorus-deoxidized copper that contains a minimum of 99.90% copper and a small amount of residual phosphorus. Owing to the presence of residual phosphorus the electrical conductivity of KME Cu-DLP is lower than that of the high-conductivity and oxygen-free coppers (Cu-ETP, Cu-FRHC, and Cu-OF). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: Cu-917. Producer or source: KME Germany GmbH.

WIELAND-Z30

Alloy Digest ◽  
2005 ◽  
Vol 54 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Cold Working ◽  
Heat Treating ◽  
Good Strength ◽  
Metalworking Industry

Abstract Wieland-Z30 has good hot and cold working properties and good strength. The alloy is easily machined and used often in the metalworking industry. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-735. Producer or source: Wieland Metals Inc., Wieland-Werke AG.

ANACONDA ALLOY 268

Alloy Digest ◽  
1982 ◽  
Vol 31 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cold Working ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Wide Range ◽  
Copper Zinc ◽  
Cold Worked

Abstract ANACONDA Alloy 268 is a copper-zinc alloy with excellent cold-working properties; it can be cold worked by all the conventional fabrication processes. Its corrosion resistance is excellent-to-good in most environments. This alloy has a wide range of applications including items such as springs, bathroom fixtures, automotive radiators, lamp sockets and sanitary traps. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-442. Producer or source: Anaconda American Brass Company.

YELLOW BRASS

Alloy Digest ◽  
1956 ◽  
Vol 5 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cold Working ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Corrosion Resistance ◽  
Copper Zinc

Abstract YELLOW BRASS is a copper-zinc alloy having excellent cold working properties with good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-41. Producer or source: Brass mills.

COPPER ALLOY No. 210

Alloy Digest ◽  
1972 ◽  
Vol 21 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Cold Working ◽  
Heat Treating ◽  
Temperature Performance

Abstract COPPER ALLOY No. 210 is a 5% zinc brass having excellent cold working properties. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-255. Producer or source: Brass mills.

Sign in / Sign up

Export Citation Format

Share Document