OLIN C197

Alloy Digest ◽  
1999 ◽  
Vol 48 (1) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Performance ◽  
Corrosion And Wear ◽  
Contact Forces ◽  
High Current ◽  
Lower Strength ◽  
Current Carrying Capability

Abstract Olin C197 is a second-generation high performance alloy developed by Olin Brass. It has a strength and bend formability similar to C194 (see Alloy Digest Cu-360, September 1978), but with 25% higher electrical and thermal conductivity. High conductivity allows C197 to replace brasses and bronzes in applications where high current-carrying capability is required. Also, the strength of C197 provides higher contact forces when substituted for many lower strength coppers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion and wear resistance as well as forming and joining. Filing Code: CU-627. Producer or source: Olin Brass.

KEMPER CuSn10

Alloy Digest ◽  
2018 ◽  
Vol 67 (8) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Wear Resistance ◽  
Physical Properties ◽  
Stress Corrosion Cracking ◽  
Copper Alloy ◽  
High Performance ◽  
Corrosion And Wear ◽  
Bend Strength ◽  
Good Resistance ◽  
Resistance To Stress

Abstract Alloy CuSn10 is a high-performance copper alloy. The alloy is characterized by good electrical and thermal conductivity and very good resistance to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength. It also includes information on corrosion and wear resistance as well as forming and joining. Filing Code: Cu-877. Producer or source: Gebr. Kemper GmbH + Company KG Metallwerke.

WIELAND-K60

Alloy Digest ◽  
2018 ◽  
Vol 67 (8) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion And Wear

Abstract Wieland K60 is an age hardenable copper alloy combining good electrical and thermal conductivity with high strength. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion and wear resistance as well as heat treating and machining. Filing Code: Cu-878. Producer or source: Wieland Metals Inc..

DELTALLOY 4032

Alloy Digest ◽  
1998 ◽  
Vol 47 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
Thermal Expansion ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
Coefficient Of Thermal Expansion ◽  
Single Point ◽  
High Strength ◽  
Corrosion And Wear

Abstract Deltalloy 4032 has good machinability and drilling characteristics when using single-point or multispindle screw machines and an excellent surface finish using polycrystalline or carbide tooling. The alloy demonstrates superior wear resistance and may eliminate the need for hard coat anodizing. Deltalloy 4032 is characterized by high strength and a low coefficient of thermal expansion. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion and wear resistance as well as machining and surface treatment. Filing Code: AL-347. Producer or source: ALCOA Wire, Rod & Bar Division.

WAUKESHA ALLOY 23

Alloy Digest ◽  
1993 ◽  
Vol 42 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Resistance ◽  
Corrosion And Wear ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract WAUKESHA METAL NO. 23 is a nickel-base casting alloy having high resistance to corrosion, good machinability, and freedom from any tendency to seize or gall. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance, corrosion and wear resistance as well as machining and joining. Filing Code: Ni-49. Producer or source: Waukesha Foundry Company. Originally published January 1959, revised March 1993.

CARPENTER ACUBE 100 ALLOY

Alloy Digest ◽  
2009 ◽  
Vol 58 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloys ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Beryllium Copper ◽  
Direct Replacement ◽  
Cobalt Base

Abstract Carpenter ACUBE 100 Alloy is cobalt-base and exhibits corrosion resistance and wear resistance. The alloy was designed as direct replacement of beryllium copper alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion and wear resistance as well as forming, heat treating, and machining. Filing Code: CO-117. Producer or source: Carpenter Specialty Alloys.

SANDVIK HIGH-N

Alloy Digest ◽  
2019 ◽  
Vol 68 (8) ◽  
Keyword(s):  
Stainless Steel ◽  
Wear Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Steel Company

Abstract Sandvik High-N is both N and Mo alloyed austenitic stainless steel. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion and wear resistance as well as forming and heat treating. Filing Code: SS-1308. Producer or source: Sandvik Steel Company.

NI-VEE TYPE D

Alloy Digest ◽  
1962 ◽  
Vol 11 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
International Nickel Company ◽  
Type D

Abstract NI-VEE Type D is a precipitation hardening leaded-nickel bearing bronze suitable for bearings and acid-resisting castings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion and wear resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-55. Producer or source: The International Nickel Company Inc.. Originally published September 1957, revised March 1962.

CARPENTER CTS BD30P ALLOY

Alloy Digest ◽  
2014 ◽  
Vol 63 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
High Performance ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Powder Metal ◽  
Market Segments ◽  
Blade Steel

Abstract Carpenter CTS-BD30P is a high-performance blade steel that forms numerous carbides with a fine distribution. A tempered hardness capability of HRC 58/60 combined with superior edger retention make this alloy a candidate for cutlery applications in multiple cutlery and knife market segments. This datasheet provides information on composition, physical properties, and hardness. It also includes information on corrosion and wear resistance as well as forming, heat treating, machining, and powder metal forms. Filing Code: SS-1182. Producer or source: Carpenter Specialty Alloys.

ENDUR-AL

Alloy Digest ◽  
2013 ◽  
Vol 62 (1) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Abrasion Resistance ◽  
Surface Hardness ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Bend Strength

Abstract Endur-Al is an advanced 5456 alloy in H34 temper that was developed for maritime applications. The alloy has exceptional surface hardness and abrasion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion and wear resistance as well as forming and heat treating. Filing Code: Al-440. Producer or source: Alcoa Europe SA.

TOUGHMET 3

Alloy Digest ◽  
2001 ◽  
Vol 50 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Corrosion And Wear

Abstract ToughMet 3 is a Cu-15Ni-8Sn alloy. ToughMet is a line of spinoidal alloys for bearings capable of performing with a variety of shafting materials and lubricants. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion and wear resistance as well as machining. Filing Code: CU-670. Producer or source: Brush Wellman Inc.

Sign in / Sign up

Export Citation Format

Share Document