TOUGHMET 3

Alloy Digest ◽  
2001 ◽  
Vol 50 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Corrosion And Wear

Abstract ToughMet 3 is a Cu-15Ni-8Sn alloy. ToughMet is a line of spinoidal alloys for bearings capable of performing with a variety of shafting materials and lubricants. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion and wear resistance as well as machining. Filing Code: CU-670. Producer or source: Brush Wellman Inc.

WAUKESHA ALLOY 23

Alloy Digest ◽  
1993 ◽  
Vol 42 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Resistance ◽  
Corrosion And Wear ◽  
Casting Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract WAUKESHA METAL NO. 23 is a nickel-base casting alloy having high resistance to corrosion, good machinability, and freedom from any tendency to seize or gall. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance, corrosion and wear resistance as well as machining and joining. Filing Code: Ni-49. Producer or source: Waukesha Foundry Company. Originally published January 1959, revised March 1993.

DH2F

Alloy Digest ◽  
1996 ◽  
Vol 45 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Corrosion And Wear ◽  
Steel Company

Abstract DH2F is a modified H13-type tool steel prehardened to 40 HRC that is free-machining. Applications include dies for plastics and zinc, plunger tips, and die plate strippers. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion and wear resistance as well as machining. Filing Code: TS-547. Producer or source: Daido Steel Company Ltd. See also Alloy Digest SA-494, March 1998.

DELTALLOY 4032

Alloy Digest ◽  
1998 ◽  
Vol 47 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
Thermal Expansion ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
Coefficient Of Thermal Expansion ◽  
Single Point ◽  
High Strength ◽  
Corrosion And Wear

Abstract Deltalloy 4032 has good machinability and drilling characteristics when using single-point or multispindle screw machines and an excellent surface finish using polycrystalline or carbide tooling. The alloy demonstrates superior wear resistance and may eliminate the need for hard coat anodizing. Deltalloy 4032 is characterized by high strength and a low coefficient of thermal expansion. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion and wear resistance as well as machining and surface treatment. Filing Code: AL-347. Producer or source: ALCOA Wire, Rod & Bar Division.

AISI C1060

Alloy Digest ◽  
1969 ◽  
Vol 18 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Spring Steel ◽  
High Carbon ◽  
Steel Mills

Abstract AISI C1060 is a high-carbon water or oil hardening tool and spring steel recommended for heavy machinery parts, shafts, springs and miscellaneous tools requiring strength and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CS-32. Producer or source: Carbon and alloy steel mills.

OLIN C197

Alloy Digest ◽  
1999 ◽  
Vol 48 (1) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Performance ◽  
Corrosion And Wear ◽  
Contact Forces ◽  
High Current ◽  
Lower Strength ◽  
Current Carrying Capability

Abstract Olin C197 is a second-generation high performance alloy developed by Olin Brass. It has a strength and bend formability similar to C194 (see Alloy Digest Cu-360, September 1978), but with 25% higher electrical and thermal conductivity. High conductivity allows C197 to replace brasses and bronzes in applications where high current-carrying capability is required. Also, the strength of C197 provides higher contact forces when substituted for many lower strength coppers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion and wear resistance as well as forming and joining. Filing Code: CU-627. Producer or source: Olin Brass.

CARPENTER ACUBE 100 ALLOY

Alloy Digest ◽  
2009 ◽  
Vol 58 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloys ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Beryllium Copper ◽  
Direct Replacement ◽  
Cobalt Base

Abstract Carpenter ACUBE 100 Alloy is cobalt-base and exhibits corrosion resistance and wear resistance. The alloy was designed as direct replacement of beryllium copper alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion and wear resistance as well as forming, heat treating, and machining. Filing Code: CO-117. Producer or source: Carpenter Specialty Alloys.

RUUKKI RAEX 300

Alloy Digest ◽  
2012 ◽  
Vol 61 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Shear Strength ◽  
Impact Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Structural Components ◽  
Wear Resistant

Abstract RUUKKI RAEX 300 (typical yield strength 900 MPa) is part of the Raex family of high-strength and wear-resistant steels with favorable hardness and impact toughness to extend life and decrease wear in structural components. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on wear resistance as well as forming, machining, and joining. Filing Code: SA-643. Producer or source: Rautaruukki Corporation.

DILLIDUR 450V

Alloy Digest ◽  
2011 ◽  
Vol 60 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Room Temperature ◽  
Surface Hardness ◽  
Heat Treating ◽  
Hot Working ◽  
Resistant Steel ◽  
Bend Strength

Abstract Dillidur 450V is a water hardened wear-resistant steel with surface hardness at room temperature of 420-480 HB. The steel is easy to weld and bend. Hot working is not recommended. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-638. Producer or source: Dillinger Hütte GTS.

CRUCIBLE CPM S30V

Alloy Digest ◽  
2003 ◽  
Vol 52 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Better Than

Abstract Crucible CPM S30V is a martensitic stainless steel designed with a combination of toughness, wear resistance, and corrosion resistance equal to or better than 440C. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity as well as fracture toughness. It also includes information on corrosion and wear resistance as well as heat treating and machining. Filing Code: SS-891. Producer or source: Crucible Service Centers.

TRISTELLE ALLOY TS-1

Alloy Digest ◽  
1996 ◽  
Vol 45 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Corrosion And Wear

Abstract TRISTELLE ALLOY TS-1 is a 30Cr-10Ni-12Co alloy developed to withstand both corrosion and galling. This alloy relies on the formation of chromium-rich carbides during solidification. It is the lowest in carbon of the Tristelle Family. The alloy is recommended for valve services. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on corrosion and wear resistance as well as joining. Filing Code: SS-662. Producer or source: Stoody Deloro Stellite Inc.

Sign in / Sign up

Export Citation Format

Share Document