CARPENTER CONSUMET ELECTRICAL IRON

Alloy Digest ◽  
1980 ◽  
Vol 29 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Thin Wall ◽  
Low Carbon ◽  
Internal Defects ◽  
Carbon Iron ◽  
Lines Of Force

Abstract CARPENTER Consumet Electrical Iron is a double-melted low-carbon iron recommended for fabricating or machining of thin-wall parts that must be vacuum tight. Melting and manufacture are controlled closely to provide freedom from porosity and internal defects. This iron is recommended for components for certain vacuum or gas-filled electronic tubes that need the capacity to carry magnetic lines of force. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: Fe-61. Producer or source: Carpenter.

GLOBEIRON

Alloy Digest ◽  
1953 ◽  
Vol 2 (6) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Magnetic Permeability ◽  
High Purity ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Tubes ◽  
Carbon Iron ◽  
High Magnetic Permeability

Abstract GLOBEIRON is a high purity, thoroughly killed, low carbon iron. It is ductile, tough, and has high magnetic permeability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Fe-1. Producer or source: Globe Steel Tubes Company.

MARVAC 18 and 18A

Alloy Digest ◽  
1965 ◽  
Vol 14 (3) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Company ◽  
Iron Base ◽  
Carbon Iron

Abstract Marvac 18 and Marvac 18A are vacuum consumable electrode melted low carbon, iron base alloys capable of nominal yield strengths of 250,000 and 280,000 psi respectively, coupled with excellent toughness and ductility. Both of the alloys respond to a managing heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-175. Producer or source: Latrobe Steel Company.

LA-LED X

Alloy Digest ◽  
1970 ◽  
Vol 19 (7) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Company ◽  
Finished Steel ◽  
Screw Machine

Abstract LA-LFD X is a low-carbon, lead-bearing, free-machining, cold-finished steel containing small amounts of tellurium. It is recommended for automatic screw machine operations. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: CS-35. Producer or source: LaSalle Steel Company.

HPM 233

Alloy Digest ◽  
2006 ◽  
Vol 55 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Electronic Components

Abstract HPM 233 is a wrought nickel with low carbon. The alloy is used in electrical and electronic components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-635. Producer or source: Hamilton Precision Metals.

APEX 28

Alloy Digest ◽  
1964 ◽  
Vol 13 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Die Casting ◽  
Heat Treating ◽  
Thin Wall ◽  
Casting Alloy

Abstract APEX 28 is an aluminum-copper-silicon die casting alloy recommended for intricate and thin wall sections. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on casting, heat treating, and machining. Filing Code: Al-137. Producer or source: Apex Smelting Company.

SUMITOMO 347AP

Alloy Digest ◽  
1993 ◽  
Vol 42 (8) ◽  
Keyword(s):  
Grain Boundary ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Niobium Content

Abstract SUMITOMO 347AP is similar to what could be called Type 347LN and was developed to prevent polythionic acid cracking in chromium depleted grain boundary areas. The columbium (niobium) content is maintained at a ratio of greater than 15 times the carbon in addition to maintaining very low carbon levels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on forming, heat treating, and joining. Filing Code: SS-548. Producer or source: Sumitomo Metal USA Corporation.

VALINOX VLX 439L

Alloy Digest ◽  
1992 ◽  
Vol 41 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Fresh Water ◽  
Stress Corrosion Cracking ◽  
Heat Treating ◽  
Low Carbon ◽  
Boiler Water

Abstract VALINOX VLX 439L is a ferritic stainless steel with 18% chromium, low carbon, and titanium stabilization to present an entirely ferritic structure; resistance to corrosion in fresh water, boiler water, and cooling waters; and an almost freedom from stress-corrosion cracking problems due to chlorinated water. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SS-531. Producer or source: Vallourec Inc..

UNS G81150

Alloy Digest ◽  
1990 ◽  
Vol 39 (11) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Wear Resistant ◽  
Nickel Chromium ◽  
Steel Mills ◽  
Medium Strength ◽  
Strength And Toughness

Abstract UNS G 81150 is a low-carbon nickel-chromium-molybdenum carburizing steel recommended for applications where a core of medium strength and toughness combined with a wear-resistant carburized case is sufficient. It has medium hardenability and can be used without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-453. Producer or source: Alloy steel mills and foundries.

ALLOY STEEL 1.8 Cu-1.0 Mn-1.2 Si

Alloy Digest ◽  
1976 ◽  
Vol 25 (10) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Cast Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills

Abstract Alloy Steel 1.8 Cu-1.0 Mn-1.2 Si is a low-carbon (0.20% max.) cast steel designed to provide intermediate tensile and yield strength. Copper lowers the ductility and toughness of cast steel but, for a given increase in tensile strength, the loss of ductility and toughness is less if copper is added than if carbon is increased. This steel has many uses such as booms, long shafting and gears. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SA-325. Producer or source: Alloy steel mills and foundries.

LUCEFIN GROUP 20NiCrMo2-2(1.6523), 20NiCrMoS2-2 (1.6526)

Alloy Digest ◽  
2020 ◽  
Vol 69 (12) ◽  
Keyword(s):  
Wear Resistance ◽  
Fatigue Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Medium Size ◽  
Case Hardening ◽  
Low Carbon ◽  
High Fatigue

Abstract Lucefin Group 20NiCrMo2-2 and 20NiCrMoS2-2 are low-carbon, Ni-Cr-Mo, alloy case-hardening steels that are used in the carburized or carbonitrided, and subsequently quench hardened and tempered, condition. These steels are, in general, used for medium-size case-hardened parts requiring high fatigue strength and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: SA-866. Producer or source: Lucefin S.p.A..

Sign in / Sign up

Export Citation Format

Share Document