HPM 233

Alloy Digest ◽  
2006 ◽  
Vol 55 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Electronic Components

Abstract HPM 233 is a wrought nickel with low carbon. The alloy is used in electrical and electronic components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-635. Producer or source: Hamilton Precision Metals.

VALINOX VLX 439L

Alloy Digest ◽  
1992 ◽  
Vol 41 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Fresh Water ◽  
Stress Corrosion Cracking ◽  
Heat Treating ◽  
Low Carbon ◽  
Boiler Water

Abstract VALINOX VLX 439L is a ferritic stainless steel with 18% chromium, low carbon, and titanium stabilization to present an entirely ferritic structure; resistance to corrosion in fresh water, boiler water, and cooling waters; and an almost freedom from stress-corrosion cracking problems due to chlorinated water. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SS-531. Producer or source: Vallourec Inc..

ALLOY STEEL 1.8 Cu-1.0 Mn-1.2 Si

Alloy Digest ◽  
1976 ◽  
Vol 25 (10) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Cast Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills

Abstract Alloy Steel 1.8 Cu-1.0 Mn-1.2 Si is a low-carbon (0.20% max.) cast steel designed to provide intermediate tensile and yield strength. Copper lowers the ductility and toughness of cast steel but, for a given increase in tensile strength, the loss of ductility and toughness is less if copper is added than if carbon is increased. This steel has many uses such as booms, long shafting and gears. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SA-325. Producer or source: Alloy steel mills and foundries.

UNS H86170

Alloy Digest ◽  
1988 ◽  
Vol 37 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Heavy Duty ◽  
Good Strength ◽  
Nickel Chromium ◽  
Steel Mills

Abstract UNS H-86170 is a low-carbon nickel-chromium-molybdenum carburizing steel of good hardenability. Its core is characterized by good strength and toughness. It is recommended for heavy-duty applications such as cams, chains, fasteners, gears, shafts and piston pins. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-435. Producer or source: Alloy steel mills and foundries.

INCO ALLOY MS 250

Alloy Digest ◽  
1987 ◽  
Vol 36 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Intermetallic Compound ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Martensitic Matrix ◽  
Inco Alloy ◽  
Heat Treated

Abstract INCO Alloy MS 250 is a cobalt-free managing steel with nominal yield strength of 250,000 psi, fully heat-treated. Strengthening results from intermetallic-compound precipitation in a low-carbon martensitic matrix. It has excellent weldability. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-426. Producer or source: Inco Alloys International Inc..

AISI 5117

Alloy Digest ◽  
1980 ◽  
Vol 29 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Chromium Steel ◽  
Low Carbon ◽  
Steel Mills ◽  
Medium Strength

Abstract AISI 5117 is a low-carbon, low-chromium steel for carburizing and other uses. It is recommended for carburizing applications where it is sufficient to have a low-hardenability core of medium strength and toughness combined with a hard, wear-resistant carburized case. It is used without carburizing in the as-rolled, annealed, normalized or quenched-and-tempered condition. It is suitable for use in the automotive, farm-machinery and many other industries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-376. Producer or source: Alloy steel mills and foundries.

SAE 8115

Alloy Digest ◽  
1973 ◽  
Vol 22 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Nickel Chromium ◽  
Steel Mills ◽  
Medium Strength

Abstract SAE 8115 is a low-carbon nickel-chromium-molybdenum carburizing steel recommended for applications where a core of medium strength and toughness combined with a wear-resistant carburized case is sufficient. It has medium hardenability and can be used without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-292. Producer or source: Alloy steel mills and foundries.

AVESTA STAINLESS 119

Alloy Digest ◽  
1985 ◽  
Vol 34 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon

Abstract AVESTA STAINLESS 119 is a hardenable duplex (martensite-austenite), low-carbon stainless steel with superior weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-466. Producer or source: Avesta Stainless Inc..

OUTOKUMPU MODA 410L/4003

Alloy Digest ◽  
2020 ◽  
Vol 69 (12) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
Low Cost ◽  
Heat Treating ◽  
Low Carbon ◽  
Alloy Steels ◽  
Corrosive Environments

Abstract Outokumpu Moda 410L/4003 is a weldable, extra low carbon, Cr-Ni, ferritic stainless steel that is best suited for mildly corrosive environments such as indoors, where the material is either not exposed to contact with water or gets regularly wiped dry, or outdoors, where some discoloration and superficial rusting are acceptable. It is a low-cost alternative to low-carbon non-alloy steels in certain applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1330. Producer or source: Outokumpu Oyj.

OUTOKUMPU MODA 410S/4000

Alloy Digest ◽  
2020 ◽  
Vol 69 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Resistance ◽  
Temperature Performance ◽  
Corrosive Environments

Abstract Outokumpu Moda 410S/4000 is a 13% Cr, ferritic stainless steel that is used in applications requiring good resistance to mildly corrosive environments. It is a low carbon, non-hardening modification of Type 410 stainless steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1329. Producer or source: Outokumpu Oyj.

NICLOY 5

Alloy Digest ◽  
1960 ◽  
Vol 9 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract NICLOY 5 is a low carbon, nickel ferritic steel reecommended for low temperature service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-96. Producer or source: Babcock & Wilcox Company.

Sign in / Sign up

Export Citation Format

Share Document