INVAR M93

Alloy Digest ◽  
2008 ◽  
Vol 57 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Low Temperatures ◽  
Bend Strength ◽  
Temperature Performance ◽  
Ni Content ◽  
Precision Alloys ◽  
Ni Alloy

Abstract Invar is an Fe-Ni alloy with 36% Ni content that exhibits the lowest expansion of known metals from very low temperatures up to approximately 230 deg C (445 deg F). Invar M93 is a cryogenic Invar with improved weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear and bend strength as well as fracture toughness and fatigue. It also includes information on low temperature performance as well as forming and joining. Filing Code: FE-143. Producer or source: Metalimphy Precision Alloys.

MAGNESIUM ZK60A

Alloy Digest ◽  
1967 ◽  
Vol 16 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Chemical Company ◽  
Temperature Performance

Abstract Magnesium ZK60A is a heat treatable extrusion and forging alloy recommended for applications where high strength with good toughness are required. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, bearing, and bend strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Mg-62. Producer or source: The Dow Chemical Company.

AISI 8630

Alloy Digest ◽  
1956 ◽  
Vol 5 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
High Tempering ◽  
High Toughness ◽  
Steel Mills ◽  
Temperature Performance

Abstract AISI 8630 is a chromium, nickel, molybdenum alloy steel. It is of the moderate deep hardening type and develops high toughness at high tempering temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-49. Producer or source: Alloy steel mills and foundries.

RMI 6Al-2Sn-2Zr-2Mo-0.15Si

Alloy Digest ◽  
2001 ◽  
Vol 50 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Bend Strength ◽  
High Modulus ◽  
Temperature Performance ◽  
Heavy Section

Abstract Ti-6Al-2Sn-2Zr-2Mo-0.05Si alloy is used as heavy section forgings that require high strength, fracture toughness, and high modulus. It is used as forgings and sheet for air frames. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as fracture toughness and creep. It also includes information on high temperature performance as well as joining. Filing Code: TI-119. Producer or source: RMI Company.

BOFORS 2RM2

Alloy Digest ◽  
1965 ◽  
Vol 14 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cast Steel ◽  
Heat Treating ◽  
High Mechanical Strength ◽  
Temperature Performance

Abstract BOFORS 2RM2 is a hardenable stainless cast steel having good weldability, high mechanical strength and improved corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: SS-169. Producer or source: Aktiebolaget Bofors.

NICLOY 5

Alloy Digest ◽  
1960 ◽  
Vol 9 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Low Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract NICLOY 5 is a low carbon, nickel ferritic steel reecommended for low temperature service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-96. Producer or source: Babcock & Wilcox Company.

URANUS B64

Alloy Digest ◽  
2015 ◽  
Vol 64 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance

Abstract Uranus B64 is a pitting resistant, high-strength nonmagnetic stainless steel. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: SS-1218. Producer or source: Industeel USA, LLC. See also Alloy Digest SS-1253, October 2016.

COPPER ALLOY No. 101

Alloy Digest ◽  
1974 ◽  
Vol 23 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Low Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Temperature Performance

Abstract Copper No. 101 is a wrought oxygen-free, high-conductivity copper for electrical and electronic applications. Its trade designation is OFE (Oxygen Free Electronic) copper. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-278. Producer or source: Copper and copper alloy mills.

ALCOLOY ALLOY 688

Alloy Digest ◽  
1970 ◽  
Vol 19 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Brass Alloy ◽  
Temperature Performance

Abstract ALCOLOY ALLOY 688 is a high-strength cobalt-aluminum modified brass alloy with good drawability and formability. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-219. Producer or source: Olin Brass.

MST 821

Alloy Digest ◽  
1958 ◽  
Vol 7 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
Heat Treating ◽  
Bend Strength ◽  
Temperature Performance

Abstract MST 821 is a weldable titanium-base alloy having a favorable combination of strength, formability and resistance to creep at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-15. Producer or source: Mallory-Sharon Titanium Corporation.

RMI 6Al-4V-0.1Ru

Alloy Digest ◽  
2002 ◽  
Vol 51 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Crude Oil ◽  
Tensile Properties ◽  
Bend Strength ◽  
Temperature Performance

Abstract Ti 6Al-4V-0.1Ru alloy is an extra-low interstitial alloy version of Ti-6Al-4V offering improved fracture toughness in air and better corrosion resistance to crude oil with chlorides. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on high temperature performance as well as joining. Filing Code: TI-125. Producer or source: RMI Titanium Company.

Sign in / Sign up

Export Citation Format

Share Document