ELEKTRON MAGNESIUM ALLOY-ZTY

Alloy Digest ◽  
1968 ◽  
Vol 17 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Magnesium Alloy ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Wrought Magnesium Alloy

Abstract ELEKTRON Magnesium-ZTY is a wrought magnesium alloy that retains almost constant 0.1% yield strength of 22000 psi up to 190 C. It is hot formable, easily machined and fully weldable. It was developed for use at temperatures up to about 250 C (480 F). This datasheet provides information on composition, physical properties, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Mg-66. Producer or source: Magnesium Elektron Ltd.

MAGNESIUM MSR-B

Alloy Digest ◽  
1967 ◽  
Vol 16 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Magnesium Alloy ◽  
Yield Strength ◽  
Physical Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Cast Magnesium Alloy ◽  
Cast Magnesium

Abstract Magnesium MSR-B is a heat-treatable magnesium alloy with highest yield strength of any cast magnesium alloy up to 480 F. It is pressure tight and weldable by argon-arc. It is recommended for aircraft nose wheels, missile components, transmission cases, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Mg-63. Producer or source: Magnesium Elektron Ltd.

MAGNESIUM MSR-A

Alloy Digest ◽  
1962 ◽  
Vol 11 (7) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Magnesium Alloy ◽  
Yield Strength ◽  
Physical Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Cast Magnesium Alloy ◽  
Cast Magnesium

Abstract Magnesium MSR-A is a heat-treatable magnesium alloy with highest yield strength of any cast magnesium alloy up to 480 F. It is pressure tight and weldable by argon-arc. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and joining. Filing Code: Mg-52. Producer or source: J. Stone & Company Ltd.

ALUMINUM 328.0

Alloy Digest ◽  
1984 ◽  
Vol 33 (10) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Magnesium Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Good Strength ◽  
Temperature Performance ◽  
Aluminum Silicon

Abstract ALUMINUM 328.0 is an aluminum-silicon-copper-magnesium alloy that responds to heat treatment. It retains good strength up to 400 F. The machinability of this alloy is fair. Its uses include cylinder blocks, crankcases, gear housings and similar components. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, and machining. Filing Code: Al-253. Producer or source: Various aluminum companies.

RMI 55

Alloy Digest ◽  
1981 ◽  
Vol 30 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Commercially Pure ◽  
Minimum Yield

Abstract RMI 55 is a grade of commercially pure unalloyed titanium. It has good ductility and formability with a guaranteed minimum yield strength of 55,000 psi. It has good impact properties at room temperatures and excellent resistance to corrosion by marine atmospheres and seawater. Among its uses are equipment requiring resistance to corrosion and aircraft parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-81. Producer or source: RMI Company.

NIMARK II

Alloy Digest ◽  
1965 ◽  
Vol 14 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract NiMark II is a vacuum melted low-carbon alloy steel in which yield strength in excess of 250,000 psi can be developed. It is readily weldable and exhibits good ductility at high strength levels and excellent notch ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-184. Producer or source: Carpenter.

MAGNESIUM HM21A

Alloy Digest ◽  
1960 ◽  
Vol 9 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Magnesium Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Alloy Sheet ◽  
Bearing Strength ◽  
Temperature Performance ◽  
Metal Products

Abstract MAGNESIUM HM21A is a magnesium alloy sheet, plate, and forging material developed for high temperature service as in aircraft and missile applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and bearing strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Mg-46. Producer or source: The Dow Metal Products Company.

AVESTA 25-22-2 LN

Alloy Digest ◽  
1989 ◽  
Vol 38 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Temperature Performance

Abstract AVESTA 25-22-2LN is a stronger, more corrosion resistant austenitic stainless than AVESTA 17-15-2.5L (revised as AvestaPolarit 724L, Alloy Digest SS-501, October 2001). It is designed for use in equipment subject to the most corrosive conditions encountered in the production of urea. At 570 F (300 C) it has about a 35% higher yield strength than 17-15-2.5L. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-506. Producer or source: Avesta Stainless Inc..

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

UNISPAN LR35

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Operational Level

Abstract UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

Sign in / Sign up

Export Citation Format

Share Document